This web site is no longer maintained,
if you want to know about t... 370 - UE002. Deposit of ash-colored earth, composed of argillaceous and sandy materials, with particles of charcoal and ash, and some roots. Charcoal samples were taken but were not very reliable ... 371 - UE003. Unit with characteristics similar to those of UE002, composed of clayey and sandy materials with a large presence of ceramic fragments and pebbles. It has a thickness of approximately... 372 - Zoomorphic vessel. Two-fingered sloth (Choloepus hoffmanni) 374 - Zoomorphic pendant representing a pelican with its head turned and resting on its back. It has a toothed mouth and two holes for hanging. It was part of a necklace of feline canines. 375 - UE088. Deposit of materials and bones in primary position, located at a depth of 2.80 m in the NE, NW and SW walls of the pit. The matrix is brown clay with reddish tones and some fine sands... 376 - Polychrome carinated jar with raised shoulders and long neck. White slip and decoration with alternate bands of red and purple. 377 - Figurative cast gold pendant representing a two-headed bat flying. It was part of the mortuary ensemble of the I5 individual from tomb T2. The suspension ring is on the back of the pendant. ... 380 - UE004. Fill with characteristics similar to stratigraphic units UE002 and UE003. 381 - EU125 (called in 2013, EU166 unit). Primary human bone deposit located at a depth of 3.48 metres. It is a multiple burial. The bodies were placed with their feet towards the SW. This unit wa... 382 - Pendant shaped as a bird of prey. 383 - Elongated amber colored stone pendant with a perforation. 384 - Carinated closed bowl with double slip(red and white). Geometrical decoration of "yc" spirals. 385 - Polychrome plate with thickened outer rim. Double slip (white on the obverse and red on the reverse) and decoration in alternating zigzagging bands of colors (red and purple). 386 - Round breastplate of hammered and embossed gold alloy with the design of a supernatural being in the shape of a two-headed crocodile. Conte style. It has four orifices for hanging, aligned w... 387 - Breastplate of hammered and embossed gold alloy with the frontal design of the face of a supernatural being with facial features of an old man. It was part of the mortuary ensemble of indivi... 388 - EU106. Deposit of three rectangular-shaped osaments (I11, I12 and I13), oriented NW-SE, located at a depth of 3.60 (upper level) - 3.93 m (lower level) in the middle tank of the pit. It res... 389 - Breastplate of hammered and embossed gold alloy with the design of a supernatural being, representing a hybrid between squid and bird. Conte Style. The squid figure is the most immediate an... 390 - Censer or incense burner with cylindrical handle with red slip that covers the piece entirely. It shows traces of use, probably the product of the burning of some resin or aromatic seed. 392 - UE134. Deposit of bones and bone structures (multiple burial), located at the lower level of the grave of tomb T2. Its morphology is square, delimited by the remains of a battery of posts. T... 393 - Ceramic whistle. 394 - Spindle whorl. It was used in the production of yarns made from vegetable fibers. 395 - Polychrome plate with thickened outer rim. Double red and white slip. Round central panel with a bird design framed by geometric decoration of a continuous spiral "yc". 396 - Long neck globular polychrome jar. Geometric decoration of a continuous spiral “yc” as a frieze along the neck and as alternating bands of color in zigzag on the body. 397 - Copper chisel. 398 - Cast gold figurative pendant which was part of the mortuary ensemble of the individual I9 of tomb T2. It is a two-headed male figure; he is nude and standing up holding a ceremonial shell tr... 400 - Stone base of a pyrite mirror. 402 - Cast gold figurative pendant. It represents a hybrid being between bird and reptile. This icon it was very widely spread by the International Style in the Isthmus-Colombian area. It belongs ... 409 - Pair of green stone (glauconite) ear rods with gold laminar covers at the ends, they were part of the mortuary ensemble of individual T2. Registration number 9401 corresponds to the left ea... 410 - Accessory 411 - Gold ingot. Cast metal artifact. 412 - UE105. Main burial of tomb T1. It is composed of eight individuals I1, I2, I3, I4, I5, I6, I7 and I8 (UE105) - four adults of undetermined sex, two possible adult women (individuals I6 and I... 413 - Diagrams of tombs T1, T2, T4, T5, T6, T7 and T8 of El Caño Area 1. The archaeological team of the Archaeological Project El Caño has been working there since 2008. This is an area reserved... 414 - EU099. Deposit of disarticulated human bones, mostly long bones, located inside the tomb pit T1 at a depth of 4.02 m - 4.10 m. The matrix is clayey, brown with reddish tones and medium grain... 416 - EU131. Circular ceramic deposit occupying an area of approximately 2 m2, located above the collapse of the lid of the funerary chamber in the lower vessel of the grave of tomb T2. It is made... 417 - EU096. Deposit located inside the grave of tomb T1 at a depth of 3.77 m (upper level) and 3.50 m (lower level). It is made up of a group of vessels, three of them zoomorphic, small plates, b... 419 - Effigy vessel. It represents a warrior from the T2 tomb. This piece combines the technique of modeling and painting decoration. The designs are geometric and refer to facial paints and/or t... 421 - Hammered gold circular pectoral with the embossed image of a supernatural hybrid being of bird and reptile, bordered by eighteen concentric circles. The piece has four perforations at the h... 422 - Laminar hammered gold cuff with embossed design. The cuff has the shape of an open truncated cone and has four holes for tying, two in the part with the largest diameter and two in the part... 423 - Laminar hammered gold cuff with embossed design. The cuff has the shape of an open truncated cone and has four holes for tying, two in the part with the largest diameter and two in the part... 424 - Stone ear rod partially encased with thin gold. These ear rods have an accessory which is used as a cap. It was found along with other mortuary ensembles associated with the individual I5. (... 425 - Cap of the stone and gold covered ear rods registered under number 5083 and associated with individual I5 found in unit UE088 (first level of T2 tomb) 426 - Stone pendant, shaped as a fang, capped with sheet gold 427 - Agate pendant in the shape of an animal with raised tail. 428 - Agate pendant in inverted "T" shape. 429 - Stone pendant capped with sheet gold. This rod had also a cap registered under the number 5365. 430 - Ear rod cap. This cap belongs to the ear rod registered under number 5123. 431 - Nose clip. 432 - Ear rod cap. 433 - Ear rod cap. 434 - Cover of wooden ear rod. 435 - Ear rod cover. 436 - Covers of wooden ear rods. 437 - Cooper nose clip. 438 - Copper pendant representing two birds. 439 - Copper chisel fragment. 440 - Copper chisel fragment. 441 - Copper chisel 442 - Accessory to ornament clothes. 443 - Copper pendant with double human figures. 445 - Discoidal brestplate of embossed gold with the design of a supernatural hybrid being of squid and bird. Conte metallurgical group. The image, organized with bilateral axial symmetry, is pres... 446 - Discoidal breastplate of embossed gold alloy with the design of a supernatural hybrid being of squid and bird. Conte metallurgical group. The image, organized with bilateral axial symmetry... 447 - Half spheres with perforations on the edges. We believe these are sheaths that were sewn to an artifact made from some kind of perishable, slightly oval spherical-shaped material. 448 - Gold half spheres with perforations. The half sphere 6528.1 has four perforations and the half sphere 6528.2 has eight perforations. 449 - Hammered gold cuff with figurative designs engraved in Conte style. Two profile anthropomorphic crocodiles linked by a belt walk upright in the opposite direction. It has four paired holes f... 450 - Hammered gold cuff with figurative designs engraved in Conte style. Two profile anthropomorphic crocodiles linked by a belt walk upright in the opposite direction. It has four paired holes f... 452 - Conical cuff made with a gold sheet belonging to the mortuary ensemble of individual I1 from tomb T1. It has four holes to insert the fastening elements. 453 - Hammered gold cuff with figurative designs engraved in Conte style. Two profile anthropomorphic crocodiles linked by a belt walk upright in the opposite direction. It has four paired holes f... 454 - Bracelet made up of 39 cast-gold bells that have a thickness of about 2 mm ranging in size from 9 to 13 mm diameter and 11 to 16 mm long. The object was part of the mortuary ensemble of indi... 455 - Gold belt made up of 63 hammered round gold beads. The size of the beads ranges between 18 and 20 mm in diameter and 14 and 19mm in length. It was found at the waist level of the individual ... 456 - Gold cuff 457 - Gold cuff. 458 - Covers of wooden ear rods Part of the bodies, mortuary ensembles and offerings of the UE106 slid over the third level burial of tomb T2 that is why some of the mortuary ensembles were not f... 459 - Ear rod cap. 460 - Ear rod. It was associated with individual I12 buried in tomb T2. Part of the unit UE106 (bodies, mortuary ensembles and offerings) slid over the third level of the tomb. That is why some ... 461 - Ear rod cap. It has got as ornamental elements, a cone in the center of the artifact that projects outwards, short parallel lines embossed along the entire contour and a braid embossed aroun... 462 - Gold-sheathed stone pendant in the shape of a fang. 464 - Cast tumbaga figurative pendant. The figure has two possible readings: two supernatural prickly lobsters each carry two human heads on their carapaces or two figures carry the lobsters on th... 465 - Anthropomorphic effigy vessel. Represents of one of the T2 tomb warriors. Late Polychrome Conte Style. 466 - Anthropomorphic effigy vessel. Represents of one of the T2 tomb offerers. We call a type of funeral ritual officiant, the ones in charge of carrying the ceramic offerings, an offerer. They... 467 - Anthropomorphic effigy vessel. Representing of one of the T2 tomb warriors. 468 - Anthropomorphic vessel with body and facial paintings. It was found in the T1 tomb at El Caño. It probably represents the main occupant of the tomb. 469 - Anthropomorphic vessel. Representing of one of the T2 tomb warriors. A red and white slipware was used, on which the pictorial decoration, representing human attributes and designs that co... 470 - Zoomorphic vessel. Represents a freshwater turtle (Trachemys scripta). 471 - Stone ear rod with gold sheathings. 472 - Globular jar. Cream-color slip with decoration in the form of red drops on the shoulder. 473 - Concave bowl. Red slip decorated with white geometric stripes decoration without outline color. 474 - Globular jar with ring base, long neck and straight edge. Red slip on the outside. 475 - Globular jar with ring base, long neck and a slightly bent straight edge. Slipware on the outer surface except the inside of the ring base. 476 - Small globular jar with high ring base and extended neck. Red slip. 477 - Small plate with red slip and white stripe decoration. 478 - Bipedal censer or incense burner with flat handle and without slip. 479 - Small globular jar with high ring base and extended neck. Red slip 480 - Polychrome tray, with ring base and raised, straight edge. Red slip on the back of the piece and white on the front. Geometric decoration with spirals and zoomorphic endings (saurus), and s... 481 - Bowl with circular base, without ring base, slightly convex walls and thickened outer rim. Light red slipware on the outside and white on the inside. Decoration with geometric patterns ("X... 482 - Long necked globular jar. Red slip and alternating colored stripe decoration parallel to the neck. 483 - Globular pot with everted edge. Cream color slip on which is applied red drop geometric decoration. 484 - Globular pot with everted edge and small handles. Red slip. 485 - Globular pot with everted edge. Thin cream-colored slip and red drop decoration on the body. 486 - Globular pot with everted edge. Thin cream-colored slip and red drop decoration on the body. 487 - Long necked globular jar. Red slip on the outside of the piece and white on the neck. Geometric decoration in black on the neck. 488 - Ear rod cap. 489 - Ear rod fragment. 490 - Low biconic pedestal with the sharp edges towards the interior. Red slip. 491 - Anthropomorphic figure of resin and gold sheathings on its extremities, face and headpiece. 492 - Gold greaves made with 384 tubular beads of between 21 and 24 mm in length, 3mm. diameter and 1 mm in thickness. They were part of the attire of the main individual I1 of tomb T1. 493 - Gold bead necklace. The beads were not found in rows, the way they were stored and can be seen in the photo, but grouped into small clusters. They may have been inserted into a woven band. 494 - Long neck globular jar. Red slip. 495 - Long neck globular jar with pointed edge. Red and white double slip. Geometric decoration with a "yc" spiral pattern as a frieze on the neck. 496 - Plate with no base and slightly pointed rim. No traces of paint or slip were found on its surface. It was registered as belonging to the unit UE091. This unit was later equated with the EU08... 497 - Globular pot with everted edge and small clay pieces as handles on the body. Cream-colored slipware and red drops without outline decoration on the body. 498 - Double anthropomorphic figure, possibly a pendant. It was made of perishable material with four gold sheathings per figure (A and B) that covered its extremities and the headpiece. It was p... 499 - Carinated bowl on a pedestal. Dark brown surface resulting from being fired in a confined space. This ceramic was collected in different bags, so it has several registers. 500 - Copper nose clip. 501 - Pendant representing a bird. 502 - Gold clothing ornament. Triangular-shaped pieces of hammered sheet gold with small attachment holes to allow it to be sewn to clothes. 503 - Globular pot with everted edge and semicircular handles of the body. Red slipware. 504 - Globular jar with everted edge and semicircular handles on the body. Red slipware covering almost all of the piece. It doesn’t have slipware on the handles or the neck. 505 - Globular long neck jar with straight edge. Red slip on the outside and white on the neck. There are traces of geometric decoration in a continuous spiral "yc". 506 - Striated concave bowl on pedestal. Grey surface resulting from being fired in a confined space. 507 - Annular base plate with thickened outer rim. Red slip on the inner and outer surface. White slip on the front side of the piece on which geometric decoration was applied in red and purple c... 508 - Concave bowl with narrow mouth and pointed edge on the outside. White slipware and decoration of parallel red bands. They left the white color of the slipware between them. 509 - Bipedal censer or incense burner with a handle in the shape of a fish tail. Cream-colored slipware and a drop and brick red band decoration. The surface of the piece presents traces of use... 510 - Bipedal censer or incense burner with a flat and rectangular handle. Cream-colored slipware and drops and red stripes decoration. Presents traces of use. Partially restored. 511 - Globular jar with a ring base, a spout handle and long neck. Red and white slipware on which geometric decoration of continuous spirals were applied to the body. 512 - Bipedal censer or incense burner with long rectangular handle. Red slip. Presents traces of use. 513 - Bipedal anthropomorphic effigy representing a warrior from the T5 tomb. White slipware on which the polychrome pictorial decoration in red and blue is applied, which refers to the tattoos o... 514 - Miniature globular jar, with a curved base and a slightly raised edge. Smooth surface without slipware. Their small dimensions and the thinness of the walls make us think that these small ... 517 - Plate with a ring base and a slightly pointed edge. Red slip covering only the front of the piece. 518 - Gold clothing ornament. Triangular-shaped piece of hammered sheet gold with two small attachment holes. Probably used to ornament a shirt or another item of clothing. 519 - Carinated bowl with a ring base, raised rim, thickened exterior and narrow mouth. Red and white slipware inside and outside of the bowl. Black geometric decoration: a line on the edge, a bl... 520 - Gold triangular-shaped clothing ornament with two small attachment holes. Probably used to ornament an item of clothing. 521 - Globular jar with a ring base, long neck and flat rim. Red slip on the outside surface and white on the neck. The decoration consists of parallel black lines and a purple band. 522 - Globular jar with a ring base and long neck. Red slip on the outer surface and white on the neck where geometric designs were applied in continuous YC spiral. 523 - Round breastplate of embossed gold with the design of a supernatural zoomorphic hybrid being (bird and reptile) Metallurgical group Conte. The main figure is formed by the union of two myth... 524 - Globular jar with annular base, long neck and straight edge. Red brick slipware on the body and white on the neck. Geometric decoration of black lines and dark red band. 525 - Globular jar with long neck and straight edge. White slip. Parallel overlapping bands in black on top of which alternates decoration in purple bands and continuous spirals YC. 526 - Embossed gold discoidal pectoral with a frontal representation of the face of a supernatural being with the features of an old man. Conte metallurgical group.
The represented face has ... 527 - Gold discoidal pectoral which is embossed with the face of a supernatural being with the features of a mythical crocodile. Conte metallurgical group.
The face has a wide and prominent n... 528 - Concave bowl on pedestal. Border slightly raised and flat as a collar. Brown surface due to being fired in a reduced space. 529 - Concave bowl on pedestal. Border slightly raised and flat as a collar. Brown surface due to being fired in a reduced space. 530 - Embossed gold discoidal pectoral with the anthropo-zoomorphic representation of a supernatural being in a bipedal position with open extremities, whose iconographic features are generally in... 531 - Plate with ring base and thickened outer rim. Red brick slip on the outside of the piece and white on the obverse side. Tripartite division of the decorative area forming three panels with ... 532 - Gold pendant, made by the lost wax casting method. It formed part of the mortuary ensemble of the principal individual in tomb T2. The image lends itself to a dual reading depending on the a... 533 - Gold bracelet. It shows a small design with an embossed bird. 534 - Arm bracelet without design. It was found very close to another arm bracelet registered under number 9283. It's its couple. 536 - Forearm bracelet with zig-zag design. 540 - Forearm bracelet with "zig-zag" design found together with the bracelet registered under number 9278. Part of the ulna and radius of the individual I7 were found within it. Adhered to the e... 541 - Laminar quincunxes of hammered and embossed gold. Set of seven square crosses with the rounded intersections of the arms and a central embossed circle. They have four perforations, for sus... 542 - Gold sheathing that covered a pendant of perishable material representing a seahorse that was part of the mortuary ensemble of the main individual I7 of tomb T2. The suspension hole is locat... 543 - Figure made of some kind of perishable organic material with gold sheathings. Anthropomorphic representation. 544 - Set of gold discs with perforations. The perforations were used to sew them to clothing. 545 - Segment (1/4) of a gold breastplate. 546 - Green beads. They were found below and on the package of sumptuary artifacts found on the remains of the burial of individual I7. They were probably part of the fabric of the bag containing... 547 - Twenty-four tubular gold beads. Between six and nine embossed bands are distributed over the surface of each one of them. These beads were found along with other beads registered under numbe... 548 - Collection of tubular beads. 549 - Collection of tubular beads. 550 - Group of gold discoidal beads. They were found inside the package associated with I7.1 553 - Group of long tubular beads. They belong to the necklace registered under number 9284. 554 - Large discoidal beads. Belonging to necklace 9284 associated with individual I7. 555 - Discoidal beads of green stones. They are part of a necklace that also had gold beads. 556 - Medium discoidal beads. 557 - Tubular beads (30) with corrugated surface. 558 - Large tubular beads (8) . 559 - Circular beads with thin walls. I7 individual necklace beads, unit UE134. 560 - Tubular gold beads. 561 - Group of gold barrel beads. Necklace of the individual EU I7134 562 - Discoidal beads of the I7 individual necklace. 563 - Biconic low pedestal with red slipware and rounded edge (slightly pointed inside). 564 - Bowl with ring base, convex walls and pointed edge. Red brick slipware on the outside and white on the inside, where a pictorial decoration was applied. 565 - Plate with ring base and rounded edge. Red color slipware exclusively on the obverse side of the piece. 566 - Globular jar with ring base, high neck and straight edge. White color slipware on the exterior surface and drawings of alternating bands of color (dark red and purple) perpendicular on the b... 567 - Plate with high ring base and pointed edge inside. Red brick slipware exclusively on the obverse side of the piece. 568 - Slightly convex bowl with flat base and thickened edge on the outside. Red slip on the outside and white on the inside. Tripartite division of decoration on the interior walls of the bowl th... 569 - Small plate with ring base and rounded edge. Red slip exclusively on the obverse side of the piece. 570 - Small bowl with ring base and convex rim. White slip on the outside and natural surface on the inside. Decoration of alternating red, white and purple bands. 571 - Globular jar with ring base and long neck. Unlike the globular jars belonging to the early period (see those of tomb T5) these usually have a less prominent neck. 572 - Ear rod with gold tubular body. 573 - Globular jar with ring base, long neck and pointed edge. Red slip on the outside surface. 574 - Carinated small bowl with ring base and convex rim. White slip on the outside and natural surface on the inside. Decoration of alternating red, white and purple bands. 575 - Ear rod with gold tubular body. 576 - Convex bowl. Red slip on the outside and white on the inside. On the internal wall, tripartite division of the decorative areas using red stripes. These decorative areas were covered with ... 577 - Ear rod with gold tubular body. 578 - Globular jar with annular base, long neck, straight edge and pointed lip. Red slip on the outside surface 579 - Ear rod with gold tubular body. 580 - Small plate with annular base and pointed edge. White slip on the obverse side of the piece and no slip on the reverse side. Geometric motifs "X" and "V". 584 - Globular jar with everted rim. Red and white slip on which is applied the geometric decoration of double divergent spirals "yc". 585 - Carinated small bowl with annular base and convex rim. White slip on the obverse side and natural surface on the reverse side. Decoration of alternating red, white and purple bands. 586 - Small bowl with a ring base and convex rim. White slip on the outside and natural surface on the inside. Decoration of alternating red, white and purple bands. 587 - Bowl with flat base, slightly convex walls and rounded edge. Red slip on the outside and white on the inside on which the pictorial decoration is applied. The decoration is divided into four... 588 - Bowl with flat base, slightly convex walls and rounded edge. Red slip on the outside and white on the inside on which the pictorial decoration was applied. The decoration is divided into f... 589 - Carinated bowl. White slip on the outside and natural surface on the inside. Decoration of alternating red, white and purple bands. 590 - Small carinated bowl with a ring base base and convex rim. White slip on the outside and natural surface on the inside. Decoration of alternating red, white and purple bands. 591 - Circular bowl with a ring base, raised, thickened and grooved edge. Cream-colored slip on both surfaces (interior and exterior). 592 - Globular vessel with curved base and everted edge. Cream-colored slip and red decoration consisting of a line over the edge. 593 - Globular vessel with everted rim. The handle joins the shoulder and the rim. Cream-colored slip and a red line on the edge as decoration. 594 - Hemispheric bowl. White slip on the outside and natural surface on the inside. Alternating red and purple color bands on the white slip 595 - Zoomorphic effigy in the shape of a flat-bottomed bowl representing a bird. Red slip on the outside and white on the inside. The edges of the bowl are laterally displaced and after applying... 596 - Small size jar. Ring base, globular body and long neck. The edge is laterally displaced, grooved and has a spout handle. Red and white slip on which a decoration is applied. It consists of ... 597 - Small size jar. Ring base, globular body and long neck. The edge is laterally displaced, grooved and has a spout handle. Red and white slip on which a decoration is applied. It consists of ... 598 - Small bowl with pedestal, hemispherical body and rim with internal displacement, slightly raised and grooved. Body incisions. Blackened surface on the outside due to being fired in a confi... 599 - Globular jar with ring base, long neck and flat rim. Red slip on the outside surface. 600 - Spherical bowl with ring base. White slip on the obverse side of the piece and natural surface on the reverse side. Zoomorphic design representing a bird. 601 - Hemispherical bowl with ring base. White slip on the obverse side of the piece and natural surface on the reverse side. Zoomorphic design representing a crustacean. 602 - Globular vessel with laterally displaced rim. White slip with black geometric patterns. The decorative panels are framed by red colored areas. 603 - Globular jar with ring base, long neck and flat rim. Red slip on the outside surface. 604 - Zoomorphic effigy vessel representing a primate. Red slip. 605 - Globular jar with a curved base, long neck and pointed rim. White slip and decoration of alternating red and purple bands. 606 - Globular jar with a ring base, angular shoulders, long neck and rounded rim. White slip on which geometric pattern is applied. On the body there are alternating rectilinear divergent double... 607 - Globular jar with a ring base, long neck and flat rim. Red slip on the outside surface. 608 - Globular jar with a ring base, long neck and flat rim. Red slip on the outside surface. 609 - Bowl with flat base, slightly convex walls and thickened outer rim. Red slip in the exterior and white on the interior where the pictorial decoration is applied which consists of a central p... 610 - Bowl with flat base, slightly convex walls and thickened outer rim. Red slipware in the exterior and white on the interior where the pictorial decoration is applied which consists of a centr... 611 - Hemispherical bowl with annular base and rounded rim. No slip on the outside and white slip inside. Zoomorphic design representing a bird. 612 - Carinated subglobular ribbed jar, with ring base, angular shoulders, long neck, spout handle and outwardly displaced and grooved rim. It presents red and white slip on which the geometric de... 613 - Globular jug with ring base, angular shoulders, long neck, spout handle and a grooved, laterally displaced rim. White color slip on which the geometric decoration was applied. The body prese... 614 - Globular jar with a striated body, ring base, angularly raised shoulders, spout handle, long neck, and a laterally displaced rim. Red slip. 615 - Globular jug with ring base, long neck and flat rim. Red slip on the outside surface. 616 - Anthropomorphic effigy vessel. It combines both a modeling and a painting technique. 617 - Globular jar with ring base, long neck and flat rim. Red slip on the outside surface 618 - Globular vessel with curved base and slightly everted edge. Cream-colored slip on the outside and natural surface on the inside. Drop or tear decoration on the slip 619 - Globular jar with a ring base, long neck, and a straight rim. Red slip on the exterior surface. 620 - Globular jar with ring base, long neck and flat rim. Red slip on the outside surface. 621 - Zoomorphic effigy in the shape of a bowl. It represents a turtle. 622 - Globular vessel with everted rim. It has two small pieces on the body in the shape of handles. It has a cream-colored slip and a drop-shaped decoration on the body. 623 - Bowl with ring base, slightly concave and rounded rim. Red slip on the outside of the bowl and natural surface on the inside. 624 - Circular bowl with straight walls and rounded rim. White slip on the outside of the bowl and natural surface inside. On the white slip alternating bands of color in red and purple, were pai... 625 - Bowl with ring base, slightly concave and rounded rim. Red slip on the outside of the bowl and natural surface on the inside. 626 - Carinated miniature bowl on pedestal. Red slip on the outside and natural surface inside the vessel. 627 - Bowl with high pedestal, grooved and concave body; ribbed rim. Black outer surface resulting from being fired in a confined space. Inner surface without slip. Perfectly polished. 628 - Globular vessel with enveloped rim. It has two small semicircular handles. It presents cream-colored slip and decoration of red brushstrokes without defined shape on the body. Red band ov... 629 - Round bowl with ring base, slightly convex walls and rounded rim. It has a white slip on the outside on which red and black bands alternate. 630 - Bowl with flat base, convex walls and rounded rim. It has red slip on the outside and white on the inside where the pictorial decoration was applied. Alternating red and purple triangular ... 631 - Carinated bowl. Red slip covering the inner and outer surface of the vessel. A second slip was applied as a white canvas to panels on the exterior walls. On these panels, geometric decorat... 632 - Slightly convex bowl with ring base and the rim slightly pointing to the inside. It was decorated on the inside and on the outside. White slip inside with decorative zoomorphic patterns (b... 633 - Ring plate and thickened rim. It has red slip on the outside and white on the inside. It was decorated with geometric patterns, consisting of a four-leaf clover-shaped design on the centra... 634 - Anthropomorphic effigy vessel. It combines both a modeling and a painting technique. 635 - Bowl of circular flat base, slightly convex and pointed rim inside. Red slip on the outside and white on the inside of the vessel. Zoomorphic central design (deer) and patterns of footprin... 636 - Globular jar with ring base, long neck and outer rim. Cream-colored slip on which the pictorial decoration was applied, combining hybrid patterns (human and saurian) with geometric ones (st... 637 - Zoomorphic effigy vessel representing a ray fish. The body is bowl-shaped, ribbed rim and tripod stand. The surface appears blackened as a result of being fired in a confined space. 638 - A hemispherical bowl on tripod and ribbed rim. The inside and outside surface is black due to the firing of the piece in a confined space. 639 - A hemispherical bowl on tripod and ribbed rim. The inside and outside surface is black due to the firing of the piece in a confined space. 640 - Zoomorphic vessel that appears to represent a possum (Didelphimorphia). 641 - Zoomorphic vessel in the form of an opossum (Didelphimorphia). 642 - Zoomorphic vessel that appears to represent a possum (Didelphimorphia). 643 - Globular vessel with a very short neck and an embossed rim. Red slip on the outside. 644 - Globular vessel of short neck and laterally displaced rim. Cream-colored slip covering the whole piece on the outside except the base. Fine paste with very fine black and white degreasers.... 645 - Globular vessel without ring base. Short neck and laterally displaced rim. Cream-colored slip covering the whole piece on the outside except the base. Fine paste with very fine black and w... 646 - Hemispheric bowl without a ring base, with handles on the rim, which are perpendicular to the symmetry axis. Cream color slip that covers the outer and inner surface of the bowl. The only d... 647 - Globular vessel with curved base and everted edge. It has two small hemispherical handles on the body. Cream color slip and drop decoration on the body. 648 - A hemispherical bowl with hemispherical handles on the rim along the axis of symmetry. Cream-colored slip. 649 - Globular vessel without ring base and slightly everted rim. Two ceramic pieces work as small handles on the body. Cream color slip. 650 - Hemispherical bowl with a ring base and beveled rim. Red slip inside and natural surface outside. 651 - Globular vessel without a ring base and everted rim. Two small handles join body and rim. Cream-colored slip. 652 - Globular vessel with everted edge. It has two small hemispherical handles. Cream-colored slip and drop decoration on the body. 653 - Concave bowl without a ring base and rounded rim. The cream-colored slip is applied exclusively to the outside of the bowl. Geometric decoration is applied on the rim in black, and a red l... 655 - Hemispherical bowl with pedestal and a rim that is pointed outwards. No slip or decoration. 657 - Anthropomorphic vessel of globular body without base, extended neck modeled in the shape of human head, with long neck, and a raised and convex rim. It has a red slip on the outside of the ... 658 - Plate with ring base and thickened outer rim. Red slip on the outside and cream colored on the front. The designs are organized in three panels, one central with geometric designs "y" and t... 659 - Miniature vessel shaped as a jug with a spout. White slip and geometric designs of continuous spiral "yc" on the body. 660 - Hemispherical bowl with a ring base and a thickened, grooved rim. Red slip exclusively inside the bowl. Zoomorphic pictorial decoration in the shape of a fish. 661 - Zoomorphic effigy vessel (balloon fish) in the shape of a bowl with a ring base and a straight and pointed rim. Red slip on the outside and natural surface on the inside. The white dots are... 662 - Large zoomorphic effigy carafe probably used for storing liquids. Red slip and small appliques framed in a white panel. Black paint probably suggesting the head and tail of a feline. 663 - Small jar with a ring base, globular body, spout handle, long neck and everted rim. White slip on which there are alternating red and purple stripes of the same thickness with a black outlin... 664 - Globular jug with ring base, long neck and rim pointed on the outside. Red slip on the outside surface except on the inside of the base. 665 - Globular vessel with everted rim and semicircular handles on the body. Cream-colored slip on the outside of the piece and no slip on the inside. Decoration of drops or tears of red paint o... 666 - Globular jar with a ring base, grooved body, spout handle, long neck and a laterally displaced and grooved rim. Red slip on the outside except on the inside of the base. 667 - Concave bowl with a ring base and round rim. Cream color slip and decoration of alternating bands of color, red, black and purple. 668 - Globular jar with a ring base, long neck and pointed rim. Red slip on the outside surface except on the inside of the base. 669 - Globular jar with a ring base, long neck and flat rim. Red slip on the outside. 670 - Bowl with a flat circular base and convex wall. Red slip on the outside and the inner central panel, and white slip on the inside walls where it was decorated with discontinuous red and purp... 671 - Circular bowl with flat base and slightly convex body. Red slip on the outside and white slip on the inside. The decoration on the internal walls is divided into four panels separated by th... 672 - Globular jar with a ring base, long neck and flat rim. Red slip on the outside surface except the inside of the base. 673 - Globular jar with a ring base, long neck and rounded rim. Red slip on the outside surface except the inside of the base. 674 - Plate with ring base and thickened rim on the outside. Red slip on the inside of the piece and white slip on the outside (except for the base),where the decoration was applied. It is organi... 675 - Plate with a ring base and thickened rim on the outside. Red slip on the front of the piece and white (except the base) on the outside, where the decoration was applied as a continuous friez... 676 - Plate with a ring base and thickened rim on the outside. Red slip on the front of the piece and white slip (except the base) on the back, where the decoration was applied and organized int... 677 - Plate with a ring base and thickened rim on the outside. Red slip on the front of the piece and white slip (except for the base) on the back, where the decoration was applied as a continuou... 678 - Plate with a ring base and thickened rim on the outside. Red slip inside the piece and white slip on the outside (except for the base), where geometric patterns were painted. These designs... 679 - Zoomorphic effigy that combines both modeling and pictorial decoration techniques. The designs that cover body, arms and face are body painting decorations and/or tattoos. 680 - Globular jar with a ring base, long neck and slightly convex rim. The red slip covers the outer surface of the jar except for the base. 681 - Globular jar with a ring base, long neck and slightly convex rim. The red slip covers the outer surface of the jar except for the base. 682 - Globular vessel with no ring base. It has semicircular handles on the body and everted rim. Cream-colored slip on the outside of the piece and red decoration in the shape of drops on the bod... 683 - Globular vessel with no ring base, and an everted rim. Small pieces on the body serve as handles. Cream-colored slip on the outside of the piece and red surface on the body. It has a red lin... 684 - Bowl with circular flat base, slightly convex body and thickened outer rim. White slip on the inside and outside of the piece (except the base). Zoomorphic decoration both inside and outsid... 685 - Globular jar with a ring base, long neck and rounded rim. Red slip covers the outer surface of the jar except for the base. 686 - Plate with a ring base and rounded rim. Red slip on the inside and outside of the piece (except the base). 688 - Globular style carafe, long neck and laterally displaced and ribbed rim. The red slip covers the entire outer surface. 689 - Globular jar of small dimensions, ring base, short neck and rounded rim. Red slip on the outside except on the base. 690 - Hemispherical bowl with a ring base and rounded rim. Red slip on the inside and the outside except for the base area. 691 - Plate with a ring base and thickened rim. Red slip on the back except in the ring base and white slip on the front. On the white slip they painted geometric figures. They divided the decora... 692 - Globular jar with a ring base, long neck and rounded rim. Red slip on the outside except on the base area. 693 - Globular jar with curved base, long neck and laterally displaced rim. White slip on the exterior on which alternating red and purple bands were painted. 694 - Globular jar with a ring base, long neck and pointed rim. Red slip on the outside except on the base area. 695 - Globular jar with a ring base, long neck and straight rim. Red slip on the outside (except the ring base) and a second white slip on the neck. Geometric decoration of a continuous spiral pa... 696 - Globular vessel. It has small pieces on the body to serve as handles and an everted rim. Cream-colored slip on the outside and red designs in the shape of drops. 697 - Plate with a ring base and thickened outer rim. Brick red slip on the back and white slip on the front. Alternating zigzag bands of red and purple. 699 - Globular jar with curved base, long neck and restricted mouth. White slip on the outside of the piece and decoration of red and purple bands. 700 - Globular jar with a ring base, long neck and straight rim. Red slip on the outside except on the base. A second white slip was applied to the neck. Geometric decoration with "yc" pattern aro... 701 - Circular bowl on pedestal with convex walls and rim. Red slip inside and outside. A second white slip was applied on the exterior walls and on it the decoration. This decoration consists of ... 702 - Circular bowl with a ring base, convex body and rim. Red slip inside and outside. Zoomorphic (crustacean) decoration on the internal base of the piece. 703 - Bowl on pedestal in the shape of a zoomorphic effigy (tortoise). Concave rim which is thickened on the exterior. Red slip on the outer surface of the pedestal. White slip on the body, over ... 704 - Globular jar with a ring base, slightly convex long neck and straight rim. Red slip on the outside (except the ring base). A second white slip was applied on the neck. Geometric decoration w... 705 - Globular jar with a ring base, long neck and pointed rim. Red slip on the outside except on the base area. 706 - Bowl with a circular base and convex body and rim. White slip on the inside and outside of the piece except on the base. Zoomorphic decoration inside the bowl with patterns of marine crustac... 707 - Globular jar, with a ring base, long neck and straight rim. Red slip on the outside except the base area. 708 - Circular bowl with a ring base, and slightly convex walls and rim. Red slip on the outside of the base, and white slip on the inside and outside of the body. Decoration is in the form of red... 709 - Plate with a ring base and rounded rim. Cream-colored slip on the inside and natural surface on the outside. The decorative area has been organized into three panels separated by wide bands ... 710 - Circular bowl with a ring base, and slightly convex walls and rim. Red slip on the outside and white slip on the inside. The decorative patterns are concentrated on the inside in a series ... 711 - Plate with ring base and rounded edge. Cream-colored slip inside the bowl on which the pictorial decoration has been applied. The space is organized into panels, separated by red and purpl... 712 - Plate with a ring base and thickened outer rim. Red slip on the back of the piece and white slip on the front. The decoration has been organized into three panels separated by red curved b... 713 - Bowl with a ring base and rounded rim. White slip on the inside of the bowl and natural surface on the outside. The decorative area is divided into two panels by a red zigzag band. In the... 715 - Hemispherical bowl with high ring base and raised carinated rim. Red slip on the interior of the bowl and no slip on the outside. 716 - Plate with a ring base and pointed rim. Red slip exclusively on the front of the piece. 717 - Plate with a ring base and pointed rim. Red slip exclusively on the front of the piece. 718 - Plate with a ring base and thickened rim. Red slip on the interior and exterior surfaces, except on the base. 719 - Hemispherical bowl with a ring base. The rim is grooved and laterally displaced. Red slip on the interior surface. 720 - Miniature concave bowl with a ring base base and slightly convex, flat rim. Greyish colour on the surface due to firing of the piece in a confined space. 722 - Globular jar with a long neck, ring base, and a pointed straight rim. Red slip on the outside surface except on the base area. 723 - Miniature globular vessel. It has a curved base, a spout handle and everted rim. Red slip on the outside. 724 - Miniature globular jar with a ring base, spout handle, and everted rim Red slip on the exterior of the piece. 725 - Miniature hemispherical bowl with a ring base and flat rim. Blackened surface due to firing of the piece in a confined space. 726 - Miniature globular jar with a ring base, spout handle and everted rim. Red slip on the outside of the piece. 727 - Miniature globular jar with a ring base, spout handle and everted rim. Red slip on the outside of the piece. 728 - Miniature globular jar. It has a ring base, spout handle, and a laterally displaced rim. Red slip on the exterior of the piece. 729 - Miniature globular jar with a ring base, spout handle and everted rim. Red slip on the outside of the piece. 730 - Hemispherical bowl with a ring base and a beveled rim on the interior. Red slip on the exterior and a natural surface on the exterior. A second slip has been applied to the inner rim, and ... 732 - Bowl with a ring base, low pedestal and slightly convex walls. It has red slip on the outside of the piece and white slip on the interior. The decorative field is organized into panels sep... 733 - Zoomorphic vessel which represents a primate and its offspring. The black surface is due to the firing of the piece in a confined space. 734 - Hemispherical bowl with a ring base and rounded rim. It has red slip on the interior and a natural surface on the exterior, on which is the figure of a serpentiform saurian. 735 - Bowl with ring base and rounded rim. It has white slip on the interior and a natural surface on the exterior. The decorative field is divided into two panels on which are painted geometric... 736 - Globular carafe with a curved base; a long, carinated neck; and an everted rim. Red slip on the exterior of the piece. 737 - Hemispherical bowl with a ring base and rounded rim. White slip on the interior and natural surface on the exterior. It is decorated with the design of a serpentiform saurian. 738 - Zoomorphic vessel which represents a primate and its offspring. The black surface is due to the firing of the piece in a confined space. 739 - Miniature hemispherical bowl with a tripod stand and grooved rim. The blackened surface is due to the firing of the piece in an enclosed space. 740 - Miniature hemispherical bowl with a tripod stand and grooved rim. The blackened surface is due to the firing of the piece in an enclosed space. 741 - Bipedal censer, with a cylindrical handle and a slightly pointed rim on the interior. Red slip on the interior and exterior. 742 - Hemispherical bowl with a ring base and thickened inner rim. Red slip on the interior and natural surface on the exterior. A second white slip has been applied to the inner rim, which is de... 743 - Concave bowl with a ring base and a convex, rounded rim. Red slip on the exterior and natural surface on the interior. A second white slip has been applied to the rim, which is decorated w... 744 - Hemispherical bowl with a tall ring base and a raised, carinated rim. Red slip on the interior and no slip on the exterior. 745 - Miniature concave bowl with a ring base and convex rim. The blackened surface is to due to the firing of the piece in an enclosed space. 746 - Carinated bowl. Red slip on the exterior and a second white slip on the rim, where a geometric decoration in black has been applied. 747 - Slightly tubular-shaped jar with curved base, short neck, and everted rim. White slip on the exterior, except in the area of the base. It is decorated with alternating bands of red and blu... 748 - Hemispherical bowl with a tall ring base, and a raised, carinated rim. Red slip on the exterior and no slip in the exterior. 750 - Bipedal censer with a flat handle in the shape of a fish tail, and a pointed rim on the interior. Natural surface without slip on both sides. 751 - Hemispherical bowl with a ring base and rounded rim. Red slip on the interior and no slip on the exterior. Zoomorphic decoration (probably a sea bass due to the characteristic black line o... 752 - Jar with a curved base, long neck, and an anthropomorhic design modelled on the rim. White slip and a geometric decoration of alternating bands of red and purple, between which the white col... 753 - Plate with a ring base and grooved rim. Brick red slip on the front of the plate. 754 - Bone carved in the shape of a mythical being with a head with a large mouth and large teeth. It also has a crest or plume of feathers, claws and a long feathered tail. 755 - Bone carved into the shape of a mythical being. It is extremely deteriorated but the typical mouth with large teeth, feathery tail, and claws on the lower extremities can be seen. 757 - Bone carved into the shape of a mythical being with claws, a crested or feathered headdress, open mouth with large teeth, coiled nose, and a body and long tail which are feathered. 758 - Bone carved into the shape of a mythical being. It features the typical crested head, open mouth with large teeth, claws, and long feathered tail. 759 - Rib of manatee carved into the form of a long-tailed mythical being, with claws; large toothed mouth, headdress or crest, and two long tusks that run along the chest and belly of the figure. 760 - Bone carved into the shape of a mythical being, with the head of a feline with big round eyes and rounded ears, claws, and the body and tail of crocodile. 769 - Collection of bone flutes. 770 - Hemispherical bowl with a high ring base, and a raised, carinated rim. Red slip on the interior of the bowl and no slip on the exterior. 771 - Bowl with a ring base and rounded rim. White slip on the interior of the bowl, and natural surface on the exterior. The decorative field is divided into two panels by means of red “zigza... 772 - Globular jar without a ring base, it has a short neck and a slightly convex rim. White slip on the exterior of the jar, and alternating bands of colour (red and blue) between which the colo... 773 - Hybrid effigy vessel (stingray and feline). White slip on which the pictorial decoration was applied in black and red. 774 - Globular jar with a ring base, long neck and flat rim. Red slip on the exterior surface, except on the interior of the ring base. 775 - Globular jar without a ring base. It has a long neck, and a rim which is laterally displaced at a right angle. White slip, with geometric decoration in the form of alternating red and purp... 776 - Hemispherical bowl with a ring base and rounded rim. White slip exclusively on the interior, and either a smoothed surface or natural surface on the outside. It features a unique zoomorphic... 777 - Hemispherical bowl with a ring base and rounded rim. White slip exclusively on the interior, and either a smoothed surface or natural surface on the outside. It features a unique zoomorphic... 778 - Plate with a ring base and a rim which is thickened on the outside. White slip on interior and exterior of the piece, except on the area of the base. 779 - Polychrome bowl. White slip on the front on the front of the piece, and no slip on the back. Zoomorphic decoration in the form of a snake coiled in a spiral. This piece belongs to the Two... 780 - Plate with ring base and a rim which is thickened on the outside. White slip on both sides of the plate. There is a continuous "yc" spiral geometric decoration on the reverse side of the p... 781 - Plate with a ring base and a rim which is thickened on the outside. Red slip on the back (except on the area of the base), and white slip on the front. Four symmetrical panels on the body ... 782 - Square bowl with ring base, straight walls, and a slightly thickened, rounded rim. The panels are decorated with geometric patterns of spirals "yc". 783 - Polychrome plate with a ring base and a rim that is thickened on the outside. Red slip on the outside of the piece and white slip on the front. Decorated with geometric patterns (birds and... 784 - Plate with a ring base and thickened rim. Brick red slip on the exterior of the piece and white slip on the front. The decorative space is organized by means of dark red bands. The three ... 785 - Globular vessel without a ring base, small handle-shaped pieces on the body, and a thickened rim. Geometric decoration in red (red line on the lip, and a pattern of drops on the body). 786 - Globular vessel without a ring base, semicircular handles on the body, and a thickened rim. Cream-colored slip and geometric decoration in red (red line on the lip and a pattern of drops on... 787 - Globular vessel without a ring base, semicircular handles on the body, and a thickened rim. Cream-colored slip. The only decorative element is a thick line on the rim. 788 - Plate with a ring base and thickened rim. Red slip on the front of the piece, and no slip on the exterior. 789 - Small globular jar with a ring base, extended neck, and a flat rim. Red slip on the exterior. 790 - Small globular jar, ring base, extended neck, and a flat rim. Red slip on the exterior. There are remains of burnt material present on the exterior surface. 791 - Small globular jar with a curved base, short neck, and a slightly convex rim. No slip has been applied to the surface. 792 - Small globular jar with a curved base, short neck, and a slightly convex rim. No slip has been applied to the surface. 793 - Miniature bowl with a ring base, concave body, and a carinated rim. The blackened surface is due to the firing of the piece in a confined space. 794 - Globular jar with a ring base, long neck, and a straight rim. Red slip on the exterior. A second white slip was applied to the neck that serves as a canvas for the geometric decoration, whi... 795 - Tubular jar with a ring base, short neck and a convex rim. White slip on the exterior on which a decoration of alternating red and purple bands was applied, leaving the color of the slip vi... 797 - Anthropomorphic effigy vessel. Globular-like body without a ring base. The piece features a supporting handle. The decoration on the arms and face represent body paintings or tattoos. 798 - Globular jar with a ring base, long neck, and a straight rim. Slip on the exterior, except on the base. 799 - Globular jar with a ring base, long neck, and a straight rim. Slip on the exterior, except on the base. 800 - Globular vessel with semicircular handles on the body, and a thickened rim. Cream-colored slip, and red decorative patches on the body. The lip features a thin red line. 801 - Low, biconic pedestal. Red slip. 802 - Globular vessel without a ring base. Semicircular handles on the body, and a thickened rim. Cream-colored slip, and red decorative patches on the body. The rim features a thin red line. 803 - Globular cooking pot with ring a base, everted rim, and pointed lip. Two handles connect the shoulders to the rim of the vessel. Red slip exclusively on the exterior of the pot. 804 - Bowl with a round flat base, convex body, and slightly convex pointed rim. Red slip on the exterior and white slip on the interior. It features decoration only on the interior. On the walls... 805 - Bowl with a ring base, and slightly convex walls and rim. Red slip on the exterior of the base, and white slip on the exterior walls and interior of the bowl. The exterior walls are decorat... 806 - Globular vessel without a ring base. Short neck and pointed rim. It has two pairs of suspension holes at the intersection of the body and neck, which serve as handles. White slip on the ex... 807 - Globular-like jar without a ring base. Thickened rim. White slip on the exterior with zoomorphic decorations (possibly agoutis) in the form of a frieze framed by bands of colour, one red a... 808 - Anthropomorphic effigy vessel. This piece combines both modelling and painting techniques for the decoration. The designs are geometric and many of them refer to facial paints and/or tattoo... 809 - Globular jar with a ring base, long neck, and straight rim. Red slip on the exterior, except on the base. It features a second white slip on the neck. The decoration is geometric, and was... 810 - Plate with a ring base, and a thickened rim on the exterior. Red slip on the interior and exterior of the piece. A second white slip serves to create a central panel which is decorated wit... 811 - Globular jar without a ring base. Long neck, and grooved rim which is displaced laterally with respect to the axis of symmetry. Cream-colored slip on the exterior of the piece, on which is... 812 - Bowl with a circular base, slightly convex walls, and a pointed rim. Red slip on the interior and exterior surface of the piece. 813 - Jar with a ring base, long neck, and a pointed rim. Red slip on the exterior and white slip on the neck. Decoration of red bands alternate with the white colour of the slip. 814 - Concave bowl with a ring base, and a thickened rim on the exterior. Double slip, red and white, on the exterior. Geometric decoration (spirals “yc”) in the form of a frieze. 815 - Zoomorphic bowl in the shape of a bird. Red slip on the interior of the piece and small indentations on the rim, wings, and tail. 816 - Globular jar with a ring base, long neck, and straight rim. Red slip on the exterior, and white slip on the neck. Geometric decoration in the form of a frieze of spirals “yc”. 817 - Hemispherical bowl with a tripod base. The blackened surface is due to the firing of the piece in a confined space. 818 - Concave bowl with a ring base and thickened rim on the exterior. Double slip, red and white, on the exterior. Geometric decoration (spirals “yc”) in the form of a frieze. 819 - Globular jar with a ring base, long neck, and a straight rim. Red slip on the exterior, except on the base. 820 - Bowl with a ring base, slightly convex walls, and a pointed rim. Red slip on the interior and exterior surfaces. White print of a claw with black outline inside the bowl. 821 - Miniature bowl on a pedestal, concave body, and a carinated rim. The blackened surface is due to the firing of the piece in an confined space. 823 - Hemispherical bowl with a ring base and rounded rim. White slip on the front of the bowl, no slip on the exterior. Zoomorphic pattern, probably a saurian. 824 - Bowl with a ring base, convex walls, and a rim that is pointed on the exterior. There is a crustacean pattern with white as the fill color, and black for the outline. 825 - Globular vessel with a ring base, long neck, and a straight rim. Red slip on the exterior, and white slip on the neck. There is a purple band on the neck. 826 - Globular vessel with a ring base, long neck, and a straight rim. Light red slip on the exterior, and white slip on the neck. There is a purple band on the neck, and a red band on the rim. 827 - Concave bowl on a pedestal. Striated body, and a raised grooved rim. The blackened surface is due to the firing of the piece in an enclosed space. 828 - Bipedal censer with a handle in the shape of a fish tail. Cream-colored slip only on the front of the receptacle, and red decoration in the form of bands on the handles, and patterns of dro... 829 - Plate with a ring base and thickened rim. Brick red slip on the exterior and white slip on the front. The decorative field is organized around a circular central panel, that contains a geome... 830 - Globular jar with a ring base, long neck, and a straight rim. Red slip on the exterior and white slip on the neck. Geometric design in the form of a frieze of spirals “yc”. 831 - Globular jar with a ring base, long neck, and straight rim. Red slip on the exterior and white slip on the neck. Geometric decoration in the form of a frieze of spirals “yc”. 832 - Plate with a ring base, and a thickened outer rim. Light red slip on the exterior and white on the front, on which was applied the decoration. This consists of alternating red and purple b... 833 - Bowl with circular base, slightly convex walls, and a pointed rim. Red slip on the interior and exterior surface. The inside of the bowl features the design of a claw print in white with a... 834 - Zoomorphic bowl on a tripod representing a tortoise. The blackened surface is due to the firing of the piece in an enclosed space. 835 - Globular vessel without ring base. Semicircular handles on the body, and a thickened rim. Cream-colored slip. Decorative designs in red on the rim (a band of color), and on the body (drops... 836 - Globular jar with a ring base, long neck, and a straight rim. Red slip on the exterior and white slip on the neck, which is decorated with a purple band. 837 - Globular jar with a striated body, ring base, long neck , and spout handle. 838 - Rectangular tray with a ring base, and a raised straight rim. Red slip on the exterior and white slip on the front, on which is applied the decoration. On the rim is the typical black line... 839 - Plate with a ring base and thickened rim on the exterior. Brick red slip on the exterior, and also on a small area of the inner rim. White slip on the front, on which the decoration was ap... 840 - Miniature concave bowl on a pedestal featuring a stepped rim. The black surface is due to the firing of the piece in an enclosed space. 841 - Miniature carinated bowl on a pedestal, with a stepped rim. The black surface is a product of the firing of the piece in a confined space. 842 - Circular bowl with a ring base, slightly convex walls, and a rim which is pointed on the exterior. Red slip on the exterior and white slip on the interior. The decoration on the interior ... 844 - Globular jar with a ring base, long neck, spout handle, and a laterally displaced rim. Red slip on the exterior and white slip on the body. The decoration consists of red and purple colore... 848 - Globular vessel with a curved base, raised neck, and a laterally displaced rim with respect to its axis of symmetry.Cream-colored slip on the exterior, except on the base. Geometric decorat... 849 - Globular vessel with a curved base, long neck, and a laterally displaced rim with respect to its axis of symmetry. Cream-colored slip on the exterior, except on the base. Geometric decorat... 850 - Globular vessel with a curved base, long neck, and a laterally displaced rim with respect to its axis of symmetry. Cream-colored slip on the exterior except on the base, and red slip on the... 851 - Globular vessel with a curved base, extended neck, and a laterally displaced rim with respect to its axis of symmetry. Cream-colored slip on the exterior except on the base. Continuous "yc... 854 - Zoomorphic vessel representing a tortoise. 855 - Bowl on a low circular pedestal. Slightly convex walls and a rounded rim. Red slip on the interior and exterior. The decoration is located on the interior walls on white panels, which are ... 856 - Zoomorphic vessel representing the head of an owl. It features a cream-colored slip on which small white streaks are painted. 857 - Zoomorphic vessel representing the head of an owl. It features a cream-colored slip on which small white streaks are painted, and a red line on the rim. 858 - Zoomorphic vessel representing the head of an owl. It features a cream-colored slip on which small white streaks are painted, and a red line on the rim. 859 - Miniature globular vessel with a tripod foot, and a handle that joins the body to the rim. Red slip. 860 - Miniature globular vessel on a tripod, and a handle that joins the body to the rim. Red slip. 861 - Miniature globular vessel on a tripod, and a handle that joins the body to the rim. Red slip. 862 - Miniature globular vessel with a flat base, thickened rim, and a spout handle. Red slip. 864 - Miniature globular vessel with a ring base, everted rim, and a spout handle. Red slip. 865 - Miniature concave bowl on a ring base, with a rounded concave rim. The blackened surface is due to the firing of the piece in an enclosed space. 866 - Zoomorphic vessel representing the head of an owl. It features cream-colored slip on which are painted small white streaks on the body, and there is a red line on the rim. 867 - Small jar with a curved base, globular body, long neck, and a laterally displaced rim with respect to its axis of symmetry. White slip with decoration in the form of red triangles, and blac... 868 - Small jar with a curved base, globular body, long neck, and a laterally displaced rim with respect to its axis of symmetry. White slip and decoration in the form of red triangles. It also f... 869 - Miniature carinated bowl with a ring base. There is a scored line on the outer lip of the rim. The blackened surface is due to the firing of the piece in an enclosed space. 870 - Concave bowl with a ring base, and a rounded concave rim. The blackened surface is due to the firing of the piece in an enclosed space. 871 - Concave bowl on a high ring base, with a rounded rim. It features red slip on the exterior of the piece and white slip on the lip, on which are also painted geometric patterns of curved lin... 872 - Concave bowl on a high ring base, with a rounded rim. It features red slip on the exterior of the piece and white slip on the lip, on which are painted geometric patterns of curved lines an... 873 - Zoomorphic jar representing a white-tailed deer. It features white slip on the lower area and red slip on the upper area. 874 - Zoomorphic jar representing a white-tailed deer. It features white slip on the lower area and red slip on the upper area. 875 - Zoomorphic jar representing a white-tailed deer. It features white slip on the lower area and red slip on the upper area. 876 - Miniature concave bowl with cream-colored slip. 877 - Carinated jar with angular shoulders, short neck, and a laterally displaced rim with respect to its axis of symmetry. Red slip on the exterior and white slip on the upper part of the body on... 878 - Tubular-bodied jar with a ring base, short neck, and an everted rim. It features white slip on the exterior on which are painted red bands which leave the colour of the slip visible between... 879 - Jar with a tubular-like body, a ring base, short neck, and a laterally displaced rim with respect to its axis of symmetry. It features white slip on the exterior on which are painted red ba... 880 - Hemispherical bowl with a ring base and a rounded rim. Dark red slip on the interior and exterior. 881 - Tubular-like jar with a flat base, long neck, and a laterally displaced rim with respect to its axis of symmetry. Red slip on the exterior and white slip on the body. It features geometric... 882 - Hemispherical bowl with a ring base and a thickened rim on the interior. Red slip exclusively on the interior. 883 - Hemispherical bowl with a ring base and a thickened rim on the interior. It features red slip on the interior and a second slip on the rim. On the latter, straight and curved lines with fe... 884 - Vessel with a curved base, a slightly extended neck, and a thickened rim. Cream-colored slip on the exterior and inner rim, and a red line on the rim. The body is decorated with red drops.... 885 - Globular-like jar with a ring base, and a raised convex rim. Red slip on the exterior. 886 - Globular-like jar with a ring base, and a raised convex rim. Red slip on the exterior. 887 - Carinated jar with a curved base, angular shoulders, short neck, and a laterally displaced rim with respect to its axis of symmetry. Red and white slip on the exterior, and decoration consis... 888 - Jar with a curved base, concave body, and a narrow mouth. White slip on the exterior and decoration in the form of red and purple bands, which leave the white color of the slip visible betw... 889 - Globular jar. White slip on the exterior and decoration of red and purple bands. Between these bands, the white color of the slip has been left visible. 890 - Globular jar with a ring base and a slightly raised thickened rim. White slip on the exterior and decoration in the form of red and purple bands, which leave the white color of the slip vis... 891 - Miniature globular vessel with a tripod base and a handle that joins the body to the rim. Red slip. 892 - Jar without a ring base, and a rim that is slightly raised and convex. White slip on the exterior and decoration in the form of red and purple bands, which leave the white color of the slip... 893 - Tubular-like jar with a ring base, and a raised convex rim. Red slip on the exterior. 894 - Concave bowl on a pedestal. The piece has a striated body and a grooved rim. Red and white slip on the exterior. Geometric patterns in black (triangles and “v” patterns), feature on th... 895 - Hemispherical bowl with a high ring base and a raised carinated rim. Red slip on the interior of the bowl, no slip is present on the exterior. Vessels like this one have only been found in... 896 - Small bowl with a ring base and rounded rim. Red slip on the interior. 897 - Circular bowl without a ring base. It has slightly convex walls and a rounded rim. Red slip on the interior surface. 898 - Ovoid jar with a restricted mouth and everted rim. White slip on the exterior, and decoration of red and purple bands. The white color of the slip has been left visible between the bands 900 - Carinated jar, with a narrow mouth and a curved rim. White slip on the outside and decoration of red and purple stripes in the form of triangular patterns and parallel lines. 901 - Carinated jar without a ring base, short neck, everted rim. White and light red slip. It is decorated with dark red stripes, arranged in parallel, leaving the white color of the slip visib... 902 - Short neck jar, everted rim. White slip. It has geometric patterns (squares and lines) on red and purple bands. 903 - Carinated jar without a ring base, angular shoulders, short neck and rim displaced laterally with respect to its axis of symmetry. It has white slip on the outside and red bands on the body. 904 - Hybrid effigy vessel. The body of the pot represents a turtle and the bowl, which was used as a lid for the pot, represents a human head. Red and black decoration on white slip. 905 - Convex bowl on pedestal. It has a raised and rounded rim. Black surface resulting from the firing of the piece in a confined space. 906 - Zoomorphic effigy jar. Globular body, without a ring base, long neck and rounded rim. The border is modeled with small appliqués shaped like the heads and legs of turtles. Decoration on t... 907 - Striated carinated jar. It has a ring base, long neck, and a laterally displaced rim in relation to its axis of symmetry. The spout handle is joined to the rim by a small appliqué. Red a... 908 - Bowl-shaped censer. It has two small feet and a flat handle. White slip and red geometric decoration in the form of bands and abstract geometric patterns. 909 - Circular bowl on a low pedestal. It has slightly convex walls and a rounded rim. It has a red slip on the outside and white on the inside. The decorative area is divided by straight and c... 910 - Plate with a ring base and rounded rim. Red slip on the interior. 911 - Hemispherical bowl on a low pedestal and grooved rim. Brown surface due to inadequate firing in a reduced space. 912 - Globular jar with a ring base and straight rim. Red slip on the exterior. 913 - Globular vessel with no ring base and an everted rim. Red slip on the outside of the vessel. 914 - Carinated bowl with a ring base and rounded rim. 915 - Plate with a ring base and a thickened rim on the outside. Red slip on the inside and outside surface, except the base. 916 - Bowl with a flat circular base on a low pedestal, slightly convex body and rounded rim. Red slip exclusively on the inside. 917 - Hemispherical bowl with a ring base and a thickened rim on the inside. Red slip on the inside and the rim, which is also decorated with straight and curved lines with black scallops. 918 - Bowl with a ring base and accentuated border. Black surface as a result of firing in a confined space. 919 - Globular jar with a curved base and a laterallly displaced rim. White slip on the exterior on which has been painted red and purple bands, leaving the white color of the slip visible betwee... 920 - Circular spindle used in the manufacture of vegetable fiber yarns. 921 - Tube-like shaped spindle used in the manufacture of vegetable fiber threads. 922 - Carinated jar without a ring base. It has angled shoulders, short neck and a ribbed rim displaced laterally with respect to its axis of symmetry. Double slip red and white. The decoration ... 923 - Carinated carafe without a ring base. It has angled shoulders, long neck and a ribbed rim displaced laterally with respect to its axis of symmetry. White slip on which it is applied the dec... 924 - Globular vessel without a ring base. It has small pieces applied to the body which serve as handles and an everted rim. Cream-colored slip, on which was applied, as the only decorative elem... 925 - Carinated jar with angular shoulders, long neck and pointed rim. White slip on the outside and decoration in the form of alternating colored bands, leaving the color of the slip on the body... 926 - Globular jar with angular shoulders, long neck and pointed rim. White slip on the outside and decoration in the shape of alternating colored bands, leaving the color of the slip on the body... 927 - Bipedal censer in the shape of a hemispherical bowl with a flat rectangular handle. Cream-colored slip on the inside, and no slip on the outside surface. Decoration of red stripes and desi... 928 - Stone ear rod with gold sheathing. This ear rod is the pair of another similar ear rod. 929 - Canine-shaped pendant. 931 - Stone base of a mirror of pyrite sheets. It is perforated (one perforation). It preserves some pyrite sheets which are adhered to the base. 932 - Ear rod cap. 933 - Ear rod cap. 934 - Gold sheaths of a wooden ear rod. Found in a package of objects on individual I7, the main occupant of tomb T2. 935 - Gold sheath of a wooden ear rod. 937 - Gold sheath of a wooden ear rod. 938 - Gold sheathings of a wooden ear rod. 939 - Wooden ear rod gold sheathings. They were found along with a group of artifacts inside a package associated with individual I7, the main occupant of tomb T2. 940 - Ear rod cap found along with other artifacts in a package associated with individual I7, the main occupant of tomb T2. 941 - Ear rod cap found along with other sumptuous artifacts, in a package associated with individual I7, the main occupant of tomb T2. 942 - Perforated emerald. Its surface is completely polished. It has a biconic perforation (it was perforated from both sides of the piece). It has small notches on the surface and two cuts, one ... 943 - Long-handled bell. It features a design of spirals along the handle. Some spirals also cover part of the surface of the rattle head. 944 - Bell. This artifact was found crushed and with the washer broken. 945 - Small gold breastplate in the shape of a stylized butterfly with four holes to hang or sew on the upper part of the plate. The vertical band, embossed on the central vertical axis of the pie... 949 - Agate bead. 951 - Circular bead necklace of dark green stone beads. 952 - Gold cuff in a truncated conical shape, without figurative designs. 953 - Gold cuff in a truncated conical shape, without figurative designs 954 - A human figure in an attitude of offering, carrying an infant in their arms, with a monkey perched on their shoulders clinging to their head. Carved from a sperm whale´s tooth. The human fi... 955 - Cast gold figurative pendant. It represents a highly schematized crocodile whose head has been replaced by a human head, made with more detail, wearing a large headdress and facial paintings... 956 - Pendant in the form of a stylized opossum in ventral view, bringing an object to its mouth. It has supernatural elements, such as two crests and a belt whose ends hang and curl to the sides.... 957 - Gold pendant. It represents a hummingbird. The wings of the hummingbird when seen from the front represent a flower. 959 - Pendant of dark green stone with gold covers, which represents an insect. 960 - Spider shaped copper pendant. It's very oxidised. The spider's abdomen is an emerald. The emerald was registered under number 7644. 961 - Emerald pendant with conical perforation on both sides. It has also been filed down along its top edge to be adhered to another piece of copper representing a spider (see artifact with regis... 962 - Group of circular plaques. These plaques have different diameters and all of them have a light circular rim and four perforations each. These perforations have been made to allow it to be se... 963 - Ear adornments. They have two bodies joined by a short tube. At the ends there is a circular surface embossed with geometric and biomorphic designs. In the centre of the circular part, poin... 964 - Bell in the shape of a peccary head. Its mouth is semi-open and in it a small sphere (jinglet) of tumbaga can be seen. 965 - Bell with handle or grip. 966 - Pendants of a belt of teeth from various animals. In the photo they are accompanied by a sperm whale tooth figure with gold covers that was found next to them. 967 - Group of small cylindrical beads. They were probably part of a necklace. 968 - Miniature breastplate. No iconographic decoration. It was split in half and next to two cuffs one inside the other, a group of small beads and a pendant, all made of gold. All these pieces s... 969 - Hammered gold discoidal pectoral, embossed with the frontal representation of the face of a supernatural being with features of a mythical crocodile. It has two suspension holes on either s... 970 - Hammered gold discoidal pectoral embossed with the mirror image of two supernatural hybrid beings of bird and reptile. It has two holes for suspension at the height of the eyes of the figur... 971 - Miniature gold cuff. No design.
It was found along with another cuff, a breastplate, a pendant and a group of small gold beads in the filling of tomb T3. The two cuffs were found insid... 972 - Miniature cuff. No figurative designs.
It was found along with another cuff (7466[1]) a breastplate (7467) a pendant (7469) and a necklace of small gold beads (7465). 975 - Group of circular gold beads. They were found mixed with a group of gold tubular beads with registration number 7468.
Probably the beads of a necklace. It was found attached to a min... 976 - Small gold cuff belonging to the mortuary ensemble of individual I20 from tomb T2. It has four holes to insert the binding elements. 977 - Small gold cuff belonging to the mortuary ensemble of individual I20 from tomb T2. It has four holes to insert the binding elements. 978 - Small gold cuff belonging to the mortuary ensemble of the individual I20 from tomb T2. It has four holes to insert the binding elements. 979 - Small gold cuff belonging to the mortuary ensemble of individual I20 from tomb T2. It has four holes to insert the binding elements. 980 - Group of green stone beads (sedimentary and crystalline rocks with glauconite and/or alpha-cristobalite). It appeared together with three breastplates (R: 9141; R: 9140 and R: 9128), three m... 981 - Covers of wooden ear rods. They appeared together with three breastplates (R: 9141; R: 9140 and R: 9128), three more cuffs (R: 9142; R: 9143; R: 9144 and 9130), a necklace with small green... 982 - Tubular artifact made with a long bone and gold sheathings. The sheathings and bones have two perforations in one of their extremities. It was found along with four other similar artifacts ... 983 - Tubular artifact made with a long bone and gold sheathings. The sheathings and bones have two perforations in one of their extremities. It was found along with four other similar artifacts ... 984 - Tubular artifact made with a long bone and gold sheathings. The sheathings and bones have two perforations in one of their extremities. It was found along with four other similar artifacts ... 986 - Tubular artifact made with a long bone and gold sheathings. The sheathings and bones have two perforations in one of their extremities. It was found along with four other similar artifacts ... 987 - Belt of pendants made with feline canines, sperm whale teeth and manatee ribs. Some of them were partially covered with gold casings. All of them have perforations. Two are carved with into... 988 - Breastplate with designs of two bipedal figures with deer antlers on the head, claws and long feathered tails.
It was found along with other artifacts, in the NE corner of the third ... 989 - Sperm whale tooth with gold sheath. Both the sheath and the tooth have two holes for hanging. The tooth was drilled with a tubular drill since a tooth plug was found inside the hole. This in... 990 - Sperm whale tooth with gold sheath. Both the sheath and the tooth have two holes for hanging. The tooth was drilled with a tubular drill since a tooth plug was found inside the hole. This in... 991 - Sperm whale tooth with gold sheath. Both the sheath and the tooth have two holes for hanging. The tooth was drilled with a tubular drill since a tooth plug was found inside the hole. This in... 992 - Sperm whale tooth with gold sheath. Both the sheath and the tooth have two holes for hanging. The tooth was drilled with a tubular drill since a tooth plug was found inside the hole. This in... 993 - Gold pendant representing two birds placed in parallel, wings folded and heads facing opposite directions.
It was found inside tomb T2, in unit UE132, a deposit of materials resulting... 994 - Tubular wooden ear rods with gold sheathings. The wooden parts have been lost. Only its sheathings and plugs are preserved. 995 - Gold tubular ear rod. 996 - Tubular ear rod and gold plug. 997 - Gold ear rods. No closure plug was found. 998 - Gold sheaths (various). These pieces were used to highlight some parts (eyes, headdresses, hands, ears, etc.) of figures made from perishable materials. 999 - Gold beads (11). 1000 - Necklace of spherical wax beads with gold casings. It was discovered in the burial pit of tomb T7 at El Caño. The beads have two different diameters. It was found along with a butterfly f... 1012 - Pendant of cast copper in the form of a human figure in the process of tearing out its eyes. It has a perforated emerald partially embedded in its belly, and two vertical rings in the back a... 1015 - Figurative cast gold pendant representing a naked man in a trance, wearing a headdress and bird mask. It has a ring behind the neck for suspension. Conte style.
It is a naked human mal... 1016 - Cast gold figurative pendant. Mythical crocodile in the shape of a fang. The figure is composed of three elements: the head and upper extremities represented in frontal view, and the rest o... 1017 - Biconic beads. They were found inside a package with other objects. Since it was not used as a mortuary ensemble on the individual to whom they were associated, we do not know what their fu... 1018 - Gold bell. 1020 - Two indentical gold chisels. On each of them, one end is pointed (a punch), and the other end is sharpened (a blade). 1021 - Tumbaga pendant in the form of a fish, probably a catfish. 1023 - Pendant in the shape of a dog. 1024 - Collection of tubular, biconic, and circular beads of different sizes. 1025 - Collection of gold sheaths; in the shape of a claw, ears, and eyes; from a figure or pendant made of resin or wood. 1026 - Small incense burner with a bipedal base, and a handle in the form of a fish tail. Cream-colored slip, and red decoration in the form of drops on the exterior surface. There is a natural s... 1027 - Globular vessel with a tripod base, and modelled zoomorphic designs. It features a zigzag line engraved on the neck. Brown slip. It shows signs of use (burning) on the base. These types ... 1028 - Globular jar without a ring base. It has a short neck and a thickened rim. Red slip on the exterior surface of the piece. 1029 - Globular vessel with a curved base, extended neck, and a laterally displaced rim. It features cream-colored slip, and is decorated with red and purple bands on the neck and rim. 1030 - Zoomorphic effigy vessel representing a monkey. It has a blackened surface as a result of being fired in an enclosed space. 1031 - White slip on which has been applied the decoration in the form of perpendicular red and purple bands. A red surface coats the neck and rim. 1032 - Globular vessel with curved shoulders, and a slightly thickened rim. White slip on which has been applied the decoration of fields of red and purple, which join in a semi-circle in the form... 1033 - White slip, red coating on the neck and rim, and decoration of red and purple bands. These bands are joined together on the shoulder with a thin black line. 1034 - Globular jar with a ring base, long neck, and a straight rim with a pointed lip. Red slip on the exterior surface of the piece, except on the interior of the ring base. 1035 - Anthropomorphic effigy vessel with a flat base. Globular body with small appliques in the form of breasts, and a support handle on the back. It features pictorial decoration on a white sl... 1036 - Miniature globular vessel without a ring base that has a spout type handle. The red color of the slip is the only decorative element. 1037 - Ceramic whistle in the form of a bird. Dark cream-colored slip. 1038 - Zoomorphic effigy vessel representing a White-tailed deer (Odocoileus virginianus). Red and white slip, and black outline. Similar vessels have been found in unit UE257 of tomb T7. 1039 - Globular jar. It features angular shoulders, a short neck, and a laterally displaced rim. Red slip. 1040 - Zoomorphic vessel representing a bird. It has a blackened surface due to being fired in an enclosed space. 1041 - Zoomorphic effigy, with a flat base and globular body, representing a bird. White slip on which is applied the decoration in red and black. 1042 - Carinated vessel with angular shoulders, short neck, and a laterally displaced rim. The slip is white. Red and purple have been used to decorate the base, neck, and rim of the piece. The ... 1043 - Bowl with a flat base and slightly convex walls. Red slip on both the interior and exterior of the piece. 1044 - Whistle in the form of a bird. It features white slip and decoration in red and black. 1045 - Zoomorphic vessel in the form of a bird. The black surface is due to the piece having been fired in an enclosed space. 1047 - Gold ear rod sheath. 1048 - Bell with a handle or grip. It has been decorated with two crocodile heads with claws. 1049 - Green-blue stone pendant carved into the form of a supernatural hybrid being of jaguar and crocodile with parts of the body covered with embossed gold sheets. For its suspension it has two ... 1050 - Tumbaga pendant (alloy of gold and copper), covered in copper oxide. It represents a quadruped with its tail raised over its back . 1051 - Collection of spherical bead covers from a belt. The beads were made with some kind of perishable material that was lost. Resin spheres within spherical gold sheaths like these, have been f... 1053 - Collection of tubular and circular beads of different sizes. Some of these are pre-forms of beads (segments of gold tubes that have been marked but not cut). 1055 - Circular and bi-conical beads, and preforms of beads (collected from a sieve). 1057 - Small circular gold beads. 1058 - Small circular and cylindrical gold beads, and one pre-form bead. 1059 - Tubular gold bead. 1060 - Circular, cylindrical, and tubular gold beads. The image also shows a green circular bead made from a sedimentary rock containing glauconite, a mineral that gives the bead its dark green col... 1061 - Circular beads and cylindrical beads of two different sizes. 1063 - Hammered gold cuff with figurative designs engraved in the Conte style belonging to the mortuary ensemble of individual I2 in tomb T1. Two anthropomorphic crocodiles in profile, bound by a ... 1064 - Hammered gold cuff with figurative designs engraved in the Conte style belonging to the mortuary ensemble of individual I2 in tomb T1. Two anthropomorphic crocodiles in profile, bound by a ... 1066 - Tubular beads. They possibly formed part of a necklace or shin guard. They were found alongside a collection of bone flutes; an artifact of spherical wood beads with gold covers (AU1047... 1067 - Gold bell pendant cast in the shape of an owl with folded wings. The suspension ring is located at the rear. Conte style. 1068 - Gold ear rod sheath. Tubular ear rods, or bar type ear rods, have two gold sheaths at their ends similar to this one. 1070 - Ear rod sheaths (2). Tubular ear rods, or bar type ear rods, have two gold sheats at their ends similar to these. When the ear rod has a woodden body, only its sheats are found. 1071 - Ear rod sheath. Tubular ear rods, or bar type ear rods, have two gold sheaths at their ends similar to this one. 1072 - Figurative cast gold pendant in the shape of a female swimming crab. It is a naturalistic representation, although very simplified due to the small size of the pendant. It has two rings beh... 1074 - Tubular gold ear rods. 1075 - Gold cuff. It has four perforations. This is the counterpart of the cuff with registration number AU11870. 1076 - Gold cuff. It has four perforations. This is the counterpart of the cuff with registration number AU11866. 1077 - Resin figure with some elements encased in gold. It represents a supernatural being in the form of an anthropomorphic fisherman bat standing, limbs open, holding two sharks with its hands. L... 1078 - Necklace of spherical resin beads, covered in gold sheaths. 1079 - Cast gold pendant with three felines. Conte Metallurgical Group. The animals, which are in a crouching position, grasp with their four paws two bars that hold them together. The bar h... 1081 - Belt made up of 52 spherical beads. All that remains of the beads are the gold sheaths. It is possible that the beads were made of wood or resin, or some other type of perishable material.... 1082 - Pendant made of an amber-coloured crystalline rock. It represents a quadruped in profile, with a tail raised over its back. It has one perforation. 1083 - Pendant that represents a rodent eating. 1084 - Pendant that represents an animal with its tail rose over its back. 1085 - Pendant that represents a crocodile with its head turned towards the back. 1088 - Extremely fragmented laminar artifact made of gold and copper of which remains a curved rim. This rim leads us to believe that it could be the remains of a butterfly shape breastplate like ... 1090 - Breastplate made of a hammered gold and copper alloy in the form of a stylised butterfly in flight with an embossed central body. In the upper part of the plate there is one of the two or m... 1092 - Hammered gold cuff. On its central part, next to the edge, it has an embossed image (3.8cm) of a supernatural being in the form of an anthropomorphic bat. The cuff has two pairs of opposing... 1093 - Hammered gold cuff. On its central part, next to the edge, it has an embossed image (3.8cm) of a supernatural being in the form of an anthropomorphic bat. The cuff has two pairs of opposing... 1094 - Belt of spherical beads (58). Of these beads only the gold sheaths with which they were covered have been conserved. It is probable that the beads were made of wood. 1096 - Tubular gold ear rod. 1097 - Tubular gold ear rod. This ear rod is the counterpart of ear rod AU12018. 1098 - Gold breastplate in the shape of a stylized butterfly in flight. It has four perforations, to allow it to be hung or sewn to clothing, in the upper part of the plate. Conte Metallurgical Gr... 1099 - Set of gold ear rods (2 pairs). They were found together on one side of individual I7’s body. They were probably inside a package placed there.
Two of the ear rods were made of wood,... 1102 - Pendant in the shape of a chisel or inverted “T”. It features a completely polished surface and a suspension hole. 1103 - Drilled canines. They were found at hip-height of individual I12 and for this reason the object has been interpreted as the remains of a belt. 1105 - Flute made from a long bone of a feline. It is decorated with “yc”, “v”, and dot designs. It also features five air outlet holes, and a suspension hole. 1106 - Drilled canines. These canines have been interpreted as components of a belt, since they were found at the height of an individual's waist. 1110 - Resin zoomorphic pendant. 1111 - Globular vessel with a long curved neck, and a thickened rim. It features white slip on which was applied the decoration consisting of areas of red and purple, joined in a semicircle in the... 1112 - Jar with a flat base, carinated body, convex angular shoulders, an extended neck, and a laterally displaced rim. Red slip. 1113 - Globular vessel with a straight rim. Red slip. 1116 - Small globular jar with a ring base, long neck, a laterally displaced rim, and a spout handle. 1117 - Miniature bowl with a low pedestal, a convex body, and a collared rim. The black surface is due to the firing of the piece in a confined space. 1118 - Globular vessel with a long neck and a laterally displaced rim. It features a white slip on which is painted, on the body, geometric patterns framed by red bands. The neck is decorated wit... 1119 - Jar with a ring base, globular body, long neck, and a straight rim. It has red slip on the exterior surface except on the interior of the base. 1120 - Effigy vessel in the form of an owl. It has a curved base, globular body, short neck, and a thickened rim. It features cream-colored slip on which narrow white bands have been applied. Th... 1121 - Globular jar with a short, slightly everted neck. It has white slip, on which spirals with claws at the ends have been painted. It has a purple band on the shoulder, and a red band on the ... 1122 - Dark-gray trapezoidal axe. The suface is hewn. The functional part, the distal end, is polished. 1123 - Stone projectile tip. It was made from a chip of red chalcedony and the stem has been retouched. 1124 - Stone projectile tip. It is made from a chip of translucent white quartz. Retouching is present on the stem. 1125 - Stone projectile tip. It was made from a chip of translucent white quartz. Retouching is present on the stem. 1126 - Stone projectile tip made from a chip of red chalcedony. The stem, one of the edges, and the central ridge have been retouched. 1127 - Stone projectile tip made from a chip of quartz or white chalcedony, which is opaque. The stem has been retouched. 1128 - Collection of stone projectile tips made from chips of red chalcedony. All of the stems have been retouched. 1129 - Stone projectile tips made from chips of red and white chalcedony. 1130 - Trapezoidal dark gray pointed axe. It features a hewn surface and is partially pitted. The distal (working) part of the artifact has been ground and polished. 1131 - Dark-gray trapezoidal axe. It has a ground surface. 1132 - Dark-gray trapezoidal stone axe. 1133 - Trapezoidal stone adze made of dark-gray stone. It features a ground and polished surface. 1134 - Stone projectile tip made from a chip of translucent quartz. It has a carved stem. 1135 - Stone projectile tip made from a chip of translucent quartz. 1136 - Fragment of a projectile tip. Translucent quartz. 1137 - Almond shaped stone axe, dark gray in color. It has an unpolished pitted surface. 1138 - Projectile tip made from cream-colored chalcedony. It has a carved stem. 1139 - Trapezoidal axe made from dark-gray stone. It features a ground unpolished surface. 1140 - Dark-gray axe with an almond-like shape. The hewing marks are preserved. It has been partially ground and is unpolished. 1141 - Projectile tip made from a chip of translucent quartz. 1142 - Almond-shaped axe. The hewing and chipping marks have been preserved. It was ground but not polished. 1143 - Projectile tip made from a chip of translucent quartz. 1144 - Almond-shaped axe. The hewing marks are preserved, and it is partially ground but unpolished. 1145 - Projectile tip made from a chip of red chalcedony. 1146 - Pointed trapezoidal stone axe featuring a ground surface. 1147 - Pointed trapezoidal stone axe. It has a rechipped surface yet the hewing marks are still visible. 1148 - Projectile tips made from chips of translucent quartz. 1149 - Stemmed projectile tip made from a chip of translucent quartz. The stem was obtained by retouching the heel of the chip. 1150 - Stemmed projectile tips made of chips of translucent quartz. The stem was obtained by retouching the base, or heel, of the chip. 1151 - Stemmed projectile tips made from chips of chalcedony. They have retouched bases (stemmed). 1152 - Stemmed projectile tip made from red chalcedony. 1153 - Scraper made from a stone chip. It has retouches on one side which gives it the irregular serrated contour characteristic of scrapers. 1154 - Stemmed projectile tips made from chips of red chalcedony. The bases of the chips have been retouched to form the stem. 1155 - Stemmed projectile tips made from stone chips. The stems have been produced by the retouching of the bases of the chips. 1156 - Stemmed projectile tip made from a chip of translucent quartz. 1157 - Stemmed projectile tip made from a chip of red chalcedony. The stem was produced by the retouching of the base of the chip. 1158 - Translucent amber-colored tubular stone bead. It was drilled on both sides until both holes met. 1159 - Circular beads of sedimentary rock, whose green color is a product of the glauconite or alpha cristobalite content. These were found along with a tubular agate bead, and two crystals of tra... 1160 - Translucent quartz crystals. 1162 - Projectile tip made from a sheet of stone. It features a stem which has produced by the retouching of the sheet. 1163 - Stemmed projectile tips made form chips of red chalcedony and translucent quartz. The stem of the tip has been produced by carving or retouching the base of the chip. 1164 - Stemmed projectile tips made from chips and sheets of red chalcedony and translucent quartz (tips with numbers 7190.1, 7190.4, and 7190.12) 1165 - Bowl on a high ring base with slightly convex walls. The rim is rounded but slightly pointed on the interior. It has white slip on the interior and on the back of the piece, on which is ap... 1166 - Plate with a ring base and a rounded rim. Red slip only on the interior of the piece. 1167 - Jar with a ring base, globular body, long neck, and a straight rim. Red slip on the exterior of the piece except on the interior of the ring base. 1168 - Long-necked globular vessel with a laterally displaced rim. It has a cream-colored slip on which are painted geometric designs. The body is decorated with “yc” spirals with claws at on... 1169 - Trapezoidal axe made from dark-gray stone. It has a polished surface. 1170 - Distal fragment of a stone sheet. Light grey color with grey toned veins. It may be the distal portion of a projectile tip made from a sheet. 1171 - Vessel with a globular body, long neck, and a laterally displaced rim. It has a cream-colored slip on which is applied a pictorial decoration. The body is decorated with geometric designs ... 1172 - Vessel with a curved base and globular body. It has a a short neck and a laterally displaced rim. It features red slip on the exterior surface of the piece. 1173 - Miniature concave bowl on a pedestal, with a rounded concave rim. The blackened surface is due to the firing of the piece in a confined space. 1174 - Vessel with a globular body, a curved concave neck, and a laterally displaced rim. It features white slip on which is painted red and purple bands that join in the form of an arc on the sho... 1175 - Vessel with a globular body, long neck, and a laterally displaced rim. It is covered in a white slip on which are painted designs like canvas . The body is decorated with “yc”spirals w... 1176 - Vessel with a globular body, long neck, and a laterally displaced rim. It is covered in a cream-colored slip. The decoration on the body is organized into four panels separated by red band... 1177 - Trapezoidal axe made from dark-gray stone. 1178 - Jar with a ring base, a tubular-like body, short neck, and an everted rim. It is covered in white slip and is painted with red and purple bands, between which the color of the slip is left ... 1180 - Fragment of a stone artifact, probably the leg of a metate. 1181 - Bowl with a ring base and concave body. There is red slip on the body and white slip on the lip. The lip is painted with geometric designs in black, and curvilinear patterns with attached ... 1182 - Miniature jar with a spout handle. Red slip on the exterior of the piece. 1183 - Stone projectile tip made from a slab. Dark-gray in color. It does not have a stem. 1185 - Projectile tip made from a slab of red and purple colored chalcedony. It does not have a stem. 1186 - Globular vessel. Red slip on the exterior surface of the piece. 1187 - Stemmed projectile tip made from a slab of green stone. 1188 - Globular vessel with a tripod support and thickened rim. It has a semicircular handle that joins the rim to the body. Ceramic without colored slip. 1189 - Trapezoidal pointed stone adze. Dark-gray in color. It has a ground surface. 1192 - Globular jar with a ring base, long neck, and a straight rim that is slightly pointed on the exterior. Red slip on the exterior surface except on the interior of the ring base. 1193 - Pebble. The surface is completely covered in cortex. Light-gray in color. 1194 - Globular jar with a ring base, long neck, and a thickened rim on the exterior. Red slip on the exterior surface of the piece, except on the interior of the ring base. 1195 - Projectile tip made from a slab. The base has been slightly retouched. Simple stem. Light-gray in color. 1196 - Gray irregular shaped pebble. 1197 - Pebble of white chalcedony. The surface is completely covered in cortex. 1198 - Pebble of red chalcedony. The surface is completely covered in cortex. 1199 - Light-gray pebble. 1200 - Large, heavy stone with a slightly polished surface. It was possibly used as an anvil. 1201 - Pointed trapezoidal stone adze. It was polished, although traces of the hewing can still be seen on the edges. 1202 - Pointed trapezoidal stone axe. 1203 - Almond shaped stone axe. It was polished. 1204 - Circular stone artifact. Polished surface. Brown in color. 1205 - Circular stone artifact. Polished surface. Dark brown in color. 1206 - Circular stone artifact. Polished surface. Brown in color. 1207 - Circular stone artifact. Polished surface. Brown in color. 1208 - Circular stone artifact. Polished surface. Dark in red color. 1209 - Globular jar with a ring base, long neck and straight rim. Red slip. 1210 - Long neck globular vessel with a laterally displaced rim. It has white slip on the outside surface,"yc" spirals on the body with red and purple bands on the shoulder and neck. 1211 - Bowl with a flat base, slightly convex walls and rounded rim. Red slip on the interior. It has no slip on the exterior. 1212 - Bowl with flat base and convex walls and rim. Slip exclusively on the interior. 1213 - Globular vessel with long neck and laterally displaced body. Cream-colored slip. It was painted with "yc" spirals, with zoomorphic figures, probably saurians, at the inner corners. The sho... 1214 - Bowl with hemispherical body, a ring base, and a convex slightly thickened inside rim. Red slip on the body and white on the lip. It is is decorated with geometric patterns. It is similar ... 1215 - Miniature globular jar, with a ring base, a short neck, and a spout handle. Red slip on the exterior, except for the inside of the ring base. 1216 - Miniature zoomorphic effigy vessel. It represents a bird (possibly an owl). Due to its state of preservation, it is not possible to know if there are remains of slip or paint. Something ve... 1217 - Set of stemmed projectile tips made from chips or sheets of chalcedony of red and yellow tones and translucent white quartz. The stems of these tips were made by retouching the base of the c... 1218 - Symmetrical almond shaped axe. Dark grey color. Most of its surface is hewn. Only the working part, the distal portion, is polished. 1219 - Almond shaped stone axe with waist. Light gray color. Polished surface. 1220 - Group of stemmed projectile tips, made from chips translucent white quartz. 1221 - Dark grey, elongated trapezoidal shaped stone axe. On its surface, especially at the edges, the partially polished marks from the hewing of the stone, can be seen. It was polished on the me... 1222 - Almond-shaped basalt axe. You can see the traces of the hewing of the stone. It was partially polished on the edge of the mesial part and on the working end. 1223 - Almond shaped stone axe. It was polished, although the traces of the hewing can be seen on the edges. 1224 - Stone chisel. It was polished on the working surface. The traces of hewing can be observed on the edges, mesia, and distal parts of the artifact. 1225 - Almond-shaped stone axe. It was partially ground and polished at the working end. However, the marks from the hewing of the stone can still be seen along the edge. 1226 - Rectangular shaped stone adze. It was polished, although the traces of the hewing can still be seen on one side. 1227 - Trapezoidal stone adze. It has a polished surface. 1228 - Trapezoidal stone adze. One of the sides is polished including the working end. The other side is ground and marks from the hewing of the stone can be seen. 1229 - Trapezoidal stone adze with polished surface on both sides, including the working (distal) part of the artifact. Traces of the carving process can still be seen. 1230 - Stone chisel. It was partially ground, although marks from the hewing of the stone can still be appreciated. 1231 - Rectangular stone adze It was ground and partially polished. 1232 - Trapezoidal stone adze. It has a ground surface. On the proximal part and edge, marks from the hewing of the stone can be seen. 1233 - Stone sheet. It has lightly retouched edges. 1234 - Elongated stone axe. It has a ground surface, although marks from the hewing of the stone can still be seen. 1235 - Stone sheet. It has lightly retouched edges. 1237 - Highly polished spherical stone. 1238 - Stemmed projectile tip made from a chip of red chalcedony. 1239 - Stone projectile tip made from a sheet of red chalcedony. 1240 - Stemmed projectile tip made from a chip of quartz or white chalcedony. 1241 - Stemmed projectile tip made from a sheet of yellow chalcedony. 1242 - Stemmed projectile tip made from a chip of red chalcedony with yellow and gray veins. 1243 - Stemmed projectile tip made from a chip of red chalcedony. 1244 - Stemmed projectile tip made from a chip of quartz or translucent white chalcedony. 1245 - Projectile tip made from a chip of red chalcedony. 1246 - Stemmed projectile tip made from a chip of translucent white quartz. 1247 - Stemmed projectile tip made from a chip of cream-colored chalcedony. 1248 - Stone sheet. 1249 - Stone sheet. 1250 - Stemmed projectile tip made from a chip of red chalcedony. 1251 - Stemmed projectile tip made from a sheet of yellow chalcedony.

It was found together with tip with registration number 5037.2 1252 - Stemmed projectile tip made from a chip of red chalcedony.

This tip was found together with the tip with registration number 5037.1 1253 - Stemmed projectile tip made from a chip of red chalcedony. 1254 - Stemmed projectile tip made from a chip of red chalcedony. 1255 - Fragment of a green stone ear rod. The surface is highly polished and shined. 1256 - Stemmed projectile tip made from a chip of red chalcedony with white veins. 1257 - Almond-shaped stone axw. The surface is ground and there are marks from the hewing process on the edges. 1258 - Stemmed projectile tip made from a chip of milky white quartz or chalcedony. It was found along with tip 5367.2 1259 - Chip of yellowish-white quartz or chalcedony. 1260 - Trapezoidal stone axe. Ground surface. 1261 - Stemmed projectile tip. It was made from a chip of red chalcedony with yellow veins. 1262 - Stemmed projectile tip. It was made from a chip of cream-colored chalcedony. 1263 - Stemmed projectile tip made from a chip of translucent white quartz. 1264 - Stemmed projectile tip made from a chip of translucent white quartz or chalcedony. 1265 - Stemmed projectile tip made from a sheet of translucent white quartz or chalcedony. 1266 - Almond-shaped stone axe. The surface is ground, although marks from the hewing of the stone can still be seen. 1267 - Almond-shaped stone axe. The surface is ground. 1268 - Almond-shaped stone axe. 1269 - Stone with cortex on 100% of its surface. Light gray color. Most of the objects deposited in the tombs of El Caño were not previously used. This causes a problem of interpretation with some... 1270 - Green stone ear rod. The entire surface is ground. It was not polished and shined, which is contrary to the process that has been observed in other similar artifacts. 1271 - Fragment of gray stone sheet. 1272 - Stemmed projectile tip made from a chip of cream chalcedony. 1273 - Stemmed projectile tip made from a chip of translucent cream-colored quartz or chalcedony. 1274 - Stemmed projectile tip made from a chip of translucent milky-white quartz or chalcedony. 1275 - Stemmed projectile tip made from a chip of cream-colored chalcedony. 1276 - Transparent quartz crystal. It was not modified. 1277 - Group of stemmed projectile tips made from red chalcedony and translucent white quartz. 1278 - Stemmed projectile projectile tip made from a chip of chalcedony or some other type non-translucent rock. 1279 - Transparent quartz crystal. It has not been modified. 1280 - Stemmed projectile tip made from a chip of cream-colored chalcedony. 1281 - Bundle of 560 stemmed projectile tips. They are made from chips of red, ochre, and cream-colored chalcedony; and also translucent white chalcedony or quartz. 1282 - Stone hammer. Made from the same raw material as the axes; the basis for the interpretation of this artifact has been the context in which it was found, a bundle of 560 stone projectile tips... 1283 - Almond-shaped stone axe. The surface is chipped and ground. 1284 - Stone axe. The surface has hewing marks. It has not been ground or polished. 1285 - Stone sheet. 1286 - Projectile tip made from a chip of translucent quartz. 1287 - Projectile tip made from a chip of translucent white quartz. 1288 - Almond-shaped stone axe. The entire surface has been ground. 1289 - Trapezoidal stone axe. The surface is ground and partially polished. Marks from the hewing and chipping of the stone can still be seen on the edges. 1290 - Distal fragment of a stone adze. The surface of the working end is ground and polished. Marks from the hewing of the stone can be seen on the edges. The proximal third has been lost. 1291 - Stemmed projectile tip made from a chip of cream-colored chalcedony. 1292 - Trapezoidal stone axe. Its surface is ground and polished, although marks from the hewing of the stone can still be seen on the edges. 1293 - Trapezoidal stone axe. Its surface is ground and polished. 1294 - Stone chisel. It has a partially ground and polished surface. 1295 - Trapezoidal stone axe. 1296 - Quartz crystal. It has not been culturally modified. 1297 - Bundle of projectile tips made from stone chips. 1298 - Almond-shaped stone axe. Its surface is partially ground and polished on the working surface, the distal end of the artifact. 1299 - Almond-shaped stone axe. The surface is partially chipped and ground. 1300 - Almond-shaped stone axe. The surface is chipped; and partially ground and polished. 1301 - Trapezoidal stone axe. It features a surface that is polished but not shined. 1302 - Grindstone. 1303 - Bundle of stemmed projectile tips made from a single nucleus of translucent quartz. 1304 - Stemmed projectile tips made from chips of translucent quartz. 1305 - Bundle of stemmed projectile tips made from chips of translucent white quartz. 1306 - Ear rod made from green stone. The surface has been polished and shined. It was found next to a similar ear rod with registration number 10423. 1307 - Ear rod made from green stone. The whole of the surface has been polished and shined. It was found along with the ear rod with registration number 10422. 1308 - Orange-colored chip of chalcedony. 1309 - Collection of green stone beads, which probably formed part of a necklace. 1310 - Bundle of stemmed projectile tips, made from chips extracted from a nucleus of translucent white quartz. 1311 - Slightly almond-shaped stone adze. It has an intermediate form somewhere between an almond-shaped and trapezoidal adze. Its surface retains the marks of grinding and polishing. 1312 - Stone chisel. It has a partially ground and polished surface, although marks caused by the cutting of the stone can still be seen. 1313 - Elongated stone axe. It has a ground and partially polished surface. 1314 - Elongated stone adze. It has a ground and polished surface, although marks caused by the cutting of the stone can still be seen on the edges and proximal part of the artifact. 1315 - Slightly almond-shaped stone axe. Its shape represents an example of an intermediate form between almond-shaped and trapezoidal axes. The surface is ground and polished, although marks cau... 1316 - Rectangular stone adze. The entirety of the surface is ground and lightly polished. 1317 - Slightly almond shaped stone adze. Its shape represents an example of an intermediate form between almond-shaped and trapezoidal adzes. The surface is ground and polished. 1318 - Trapezoidal stone adze. The entirety of the surface is polished. 1319 - Almond-shaped stone axe. Ground surface. Marks from the cutting of the stone can be seen on the edges, especially on the proximal part of the artifact. 1320 - Slightly almond-shaped stone axe. Its shape represents an example of an intermediate form between almond-shaped and trapezoidal axes. Its surface is ground and polished, although marks from... 1321 - Trapezoidal stone axe. The surface is ground, although the marks from the cutting of the stone can still be seen on the edges and heel of the artifact. 1322 - Stone adze. The surface is ground and polished. 1323 - Bundle of stemmed projectile tips made from chips of red and cream chalcedony. 1324 - Stemmed projectile tip made from a chip of red chalcedony. 1325 - Bundle of stemmed projectile tips. They were made from chips of quartz, and/or translucent white chalcedony in some cases. 1326 - Collection of stemmed projectile tips made from chips from a nucleus of translucent white quartz. 1327 - Bundle of stemmed projectile tips. These were made from chips of red and white chalcedony, and also translucent white quartz or chalcedony. 1328 - Collection of two adzes and an axe of varying shapes. The trapezoidal ones are those in the corners of the photograph and the one in the middle is almond-shaped. All of the artifacts are gr... 1329 - Polished green stone ear rod. This was found next to a similar ear rod with registration number 10613. 1330 - Green stone ear rod. The surface has been polished but not shined. It was found next to a similar ear rod, with registration number 10612. It was assumed that these artifacts formed a pair. 1331 - Stemmed projectile tips made from chips of translucent white quartz. 1332 - Stone with the entirety of its surface covered in cortex.

Hammers are usually unmodified stone artifacts, which are made from a very hard rock. Since most of the artifacts found... 1333 - Elongated trapezoidal stone axe with a waist. It has been ground and polished. The marks from the cutting of the stone can still be seen on the base. 1334 - Trapezoidal stone adze. The entirety of the surface has been polished and shined. 1335 - Trapezoidal stone axe. The surface has been ground, although marks from the cutting process can still be seen on the edges. 1336 - Trapezoidal stone adze. The entirety of the surface has been ground, although marks from the cutting of the stone are present on the edges and base. 1337 - Trapezoidal stone adze. The surface is ground and polished, and there are marks from the cutting of the stone on the base and upper edge. 1338 - Trapezoidal stone axe. The surface is ground, and there are marks from the cutting of the stone on the base and upper edge. 1339 - Collection of almond-shaped stone axes. The artifacts have been ground, although not totally. All of the artifacts bear marks from the cutting process. 1340 - Fragments of a stone base from a pyrite mirror. 1341 - Fragments of a stone base from a pyrite mirror. 1342 - Collection of green stone beads. They were found covering the package associated with individual I7 1343 - Trapezoidal stone adze. The surface is partially ground and polished (on the interior body and the distal, or working, edge), and there are marks from the cutting of the stone on the edges ... 1344 - Trapezoidal stone adze. The surface is polished and there are some marks from the cutting of the stone on the proximal end of the artifact. 1345 - Possibly an axe. It is made of stone and rectangular in shape. The surface is polished and there are marks from the cutting of the stone on the edges. The blade is almost symmetrical. 1346 - Almond-shaped stone adze. It bears the marks of the grinding and cutting of the stone on the entire body, except for the working surface situated on the distal end of the artifact. This po... 1347 - Trapezoidal stone axe. The surface is ground, and there are marks from the cutting of the stone. 1348 - Almond-shaped stone axe. The surface is polished and there are also marks from the cutting of the stone on the edges and heel. 1349 - Elongated trapezoidal stone adze. The surface is polished and there marks from the cutting of the stone on the edges and heel. 1350 - Almond-shaped stone axe. The surface is polished and there are marks from the cutting of the stone on the edges and proximal end. 1351 - Stemmed projectile tip made from a chip of red chalcedony. 1352 - Stemmed projectile tip made from a chip of cream-colored chalcedony. 1353 - Stemmed projectile tip made from a chip of red chalcedony with cream-colored veining. There is a notch on one of its edges. 1354 - Stemmed projectile tip made from a chip of cream-colored chalcedony. 1355 - Almond-shaped stone axe. The artifact has been partially polished, but the entirety of the surface still bears the marks from the initial cutting of the stone, including the working surface... 1356 - Trapezoidal stone axe. The surface is polished and there are some marks from the cutting of the stone. 1357 - Trapezoidal stone axe. The surface is polished, and there are also marks from the cutting of the stone on the edges and heel. 1358 - Rectangular stone axe. It features a highly polished surface. 1359 - Trapezoidal stone axe. The surface is highly polished, although there are some marks from the cutting of the stone on the edges. 1360 - Trapezoidal stone axe. The surface is highly polished, although there are some marks from the cutting of the stone on the heel. 1361 - Elongated stone adze. The surface has been ground, but marks from the cutting of the stone can still be seen on some points of its edges. The distal end (working surface) is polished. 1362 - Trapezoidal stone axe. This surface has been ground and polished. There are some marks on the edges from the cutting of the stone. 1363 - Retangular stone axe. The entirety of the surface is ground and polished. It has veins of different shades of white and grey giving it a different appearance to most of the axes and chisel... 1364 - Trapezoidal stone adze. The entirety of the surface is polished. Some marks from the cutting of the stone can be seen on one of the edges. 1365 - Trapezoidal stone adze. The entirety of the surface is ground and polished, and there are some marks from the cutting of the stone on the heel. 1366 - Almond-shaped stone adze. It has a ground and polished surface. 1367 - Trapezoidal stone adze. It has a ground and polished surface. 1368 - Elongated stone axe. The surface is ground and polished, and there are marks from the cutting of the stone along the edges and the heel. 1369 - Circular stone base from a pyrite mirror. It has a hole in the centre. 1370 - Trapezoidal stone adze. The entirety of the surface has been polished and shined. 1371 - Retangular-oval shaped stone adze. It has a ground and polished surface with marks from the stone cutting process on its edges. 1372 - Almond-shaped stone axe. The entirety of the surface is polished, and there are some marks from the stone cutting process on the edge close to the heel. 1373 - Trapezoidal stone axe. The entirety of the surface has been polished and shined. It was made from a block of cream-colored stone. 1374 - Trapezoidal stone adze. It has a ground and polished surface. 1375 - Almond-shaped stone adze. It has a ground and polished surface. 1376 - Trapezoidal stone adze. It has a ground and polished surface, and there are some marks from the stone cutting process on the edges. 1377 - Sheet of dark-gray stone. It has some retouch on the edges. 1378 - Stone chisel. The artifact has been polished where there are marks from the stone cutting process, and on the edges and heel. 1379 - Tubular bead of translucent amber-colored stone. 1380 - Cuenta de piedra de color ambarino traslúcido. Bead made from translucent amber-colored stone. 1381 - Circular stone base from a pyrite mirror. 1382 - Stone ear rod. 1383 - Collection of green stone beads, cut and polished. All of them represent the same icon. 1384 - Stone sheet. 1385 - Projectile tip made from a chip of translucent white quartz. 1386 - Projectile tip made from a chip of translucent white quartz. 1387 - Small globular jar with a ring base, it has an extended neck and straight rim. Red slip on the exterior surface. 1388 - Long-necked globular vessel with a laterally displaced rim. Cream-colored slip. It features zoomorphic designs in the form of birds, and also geometric designs in the form of bands of color... 1389 - Miniature globular jar with a ring base, extended neck, and a rounded rim. Red slip on the exterior of the piece. 1390 - Globular jar with a ring base, extended neck, and a pointed rim. Red slip on the exrerior surface. 1391 - Miniature globular jar with a ring base, extended neck, and a straight rim with a rounded lip. Red slip on the exterior of the piece. 1392 - Globular jar with a long neck and a laterally displaced rim. A spout handle joins the rim to the body of the vessel. The slip that has been used is white and red. On this the pictorial de... 1394 - Globular jar with a restricted mouth and straight rim. It has white slip on which is painted red and purple bands outlined in black. The white color of the slip has been left visible betwe... 1395 - Long-necked globular vessel with a laterally displaced rim. It has cream-colored slip on which are painted red “yc” spirals with inner ends in the form of claws. There is also a purple... 1396 - Miniature anthropomorphic effigy vessel which combines pictorial decoration and modelling. It has white slip on which are painted the anatomical attributes and body paints. 1397 - Globular jar with a ring base, long neck, and a laterally displaced rim. It has a white slip on which alternate red and purple bands are painted, leaving the white of the slip visible betwe... 1398 - Globular jar with a circular base, short neck, and a thickened rim. It has a white slip on which are painted red bands with black outlines. 1399 - Bowl with a flat base, and slightly convex walls and rim. Red slip on the exterior, and white slip on the interior. It is decorated with red and purple bands arranged alternately, leaving ... 1400 - Small sized globular jar with a ring base, long neck, and a laterally displaced rim. A spout handle joins the body to the rim of the vessel. It features white slip, and purple “yc” spi... 1401 - Small long-necked jar with a ring base, a carinated body with grooved mouldings, and a laterally displaced rim. On the exterior there is red brick color slip. 1402 - Bowl with a flat base, and slightly convex walls and rim. Red slip on the exterior, and white slip on the interior. It is decorated with red and purple bands arranged alternately, leaving ... 1403 - Zoomorphic vessel. It has a globular body, convex base, and a thickened rim. The neck is modelled in the form of a birds head. There is red slip on the body, and white slip on the neck an... 1404 - Globular vessel without a ring base. It has a long neck and a laterally displaced rim, and is covered in white slip. The piece features geometric and zoomorphic patterns. A zigzag line de... 1405 - Globular jar with a convex base, long neck, and an everted rim. It features white slip on which are painted red and purple bands outlined in black. 1406 - Globular jar without a ring base. It has a long neck and an everted rim. The body features cream colored slip with geometric patterns of continuous “yc” spirals with fields of color in... 1407 - Gobular vessel without a ring base. It has a long neck and a laterally displaced rim. It is covered in white slip. Continuous divergent spirals are painted on the slip (with claw-like des... 1408 - Bowl with a flat base and slightly convex walls and rim. Red slip on the exterior and white slip on the interior. The decorative panels, both the central one and the ones on the interior w... 1409 - Long-necked globular vessel with a laterally displaced rim with respect to its axis of symmetry. It is decorated with geometric and zoomorphic patterns, and also blue and red bands placed p... 1410 - Globular vessel with a thickened rim and curved base, it does not have a neck. It is covered in a brown slip. This vessel is very similar to the Guácimo pots with respect to its shape and... 1411 - Small globular jar without a ring base. It has a long neck and a straight rim. Red slip on the exterior of the piece. 1412 - Small globular jar without a ring base. It has a long neck and a straight rim. Red slip on the exterior of the piece. 1413 - Miniature globular jar with a ring base, short neck, and thickened rim. It features a spout handle that joins the body to the neck of the piece. Red slip on the exterior. 1414 - Small globular jar without a ring base. It has a short neck, and a straight rim with a rounded lip. Red slip on the exterior of the piece. 1415 - Small globular jar with a ring base and straight rim. Red slip on the exterior of the piece. 1417 - Globular jar without a ring base. It has a long neck and a straight rim. Red slip. 1418 - Small vessel with a tripedal base, carinated body, and a thickened rim. It does not have a neck. Two small handles, with presumably anthropomorphic faces, join the rim to the body of the v... 1419 - Small globular jar without a ring base. It has a long neck and straight rim. Red slip on the exterior. 1420 - Small jar with a ring base, globular body, long neck, and a straight rim. 1421 - Zoomorphic vessel. It has cream colored slip with white lines on the body, and red lines on the rim. It represents a bird. 1422 - Globular vessel with a long neck, straight rim, and a rounded lip. Red slip on the exterior surface of the piece. 1423 - Hemispherical bowl with a ring base and a grooved rim. Red and white slip on the interior and exterior of the vessel. 1425 - Globular jar with a ring base, a long neck, and a straight rim. Red slip on the exterior of the piece. 1426 - Globular jar with a ring base, long neck, and a straight rim. Red slip. 1427 - Globular jar with a ring base, long neck, and a straight rim. Red slip. 1429 - Globular jar with a ring base, long neck, and a straight rim. Red slip. 1430 - Globular jar with a ring base, a long neck, and a straight rim. Red slip. 1431 - Globular jar with a ring base, long neck, and a straight rim. Red slip. 1432 - Vessel with a convex base and a slightly convex body. It has a short neck and a laterally displaced rim. It is covered in very faint red slip. It has a spout handle at the height of the ba... 1433 - Globular jar with a ring base, long neck, and a straight rim. Red slip. 1434 - Globular jar with a curved base, a long curved neck, and a thickened rim. Red slip on the exterior of the piece. 1435 - Concave bowl. 1436 - Globular jar with a ring base, long neck, and straight rim. Light red slip on the exterior. 1437 - Miniature globular jar. It has a ring base, long neck, and a straight rounded rim. 1438 - Globular jar with a ring base, long neck, and straight rim. The exterior surface is covered in a fine red slip. 1439 - Globular jar with a concave base, long neck, and a straight rim. Red slip on the exterior. 1440 - Bowl with a flat base on a low pedestal. The walls and rim are slightly convex. There is white slip on the interior and exterior, except on the base and the exterior of the pedestal, which... 1441 - Long-necked globular vessel with an everted rim. Red slip on the exterior of the piece. 1442 - Zoomorphic carinated jar. It depicts a fresh-water turtle, "Trachemys venusta". This turtle is characterized by the concentric circles on its shell and the longitudinal lines on its head,... 1444 - Miniature globular vessel with a tripod base and a slightly everted rim. A semicircular handle joins the rim to the body of the vessel. Light brown slip. 1445 - Miniature carinated vessel. It has angular shoulders, and the rim is laterally displaced. Red slip on the exterior of the piece. 1446 - Miniature zoomorphic effigy vessel, which depicts a bird. Red slip. 1447 - Concave bowl on a pedestal, with a raised rim. The blackened surface is a product of the firing of the piece in a confined space. 1448 - Tubular vessel with a ring base, short neck, and a thickened rim. It has white slip, on which are painted red and purple bands. Between them, the white color of the slip has been left visi... 1449 - Globular vessel with a convex rim and a tripod base. It has handles on the body with small appliqués on them in the form of eyes. Cream-colored slip. 1450 - Globular jar with a ring base, long neck, and a rounded straight rim. Red slip on the exterior of the piece. 1451 - Miniature zoomorphic effigy (bird). The blackened surface is a product of the firing of the piece in an enclosed space. 1452 - Small carinated jar with a ring base, and a body that is striated and carinated. The shoulder is raised and angled. It also features a long neck and a laterally displaced rim. A spout han... 1453 - Miniature incense burner with bipedal support and a handle. Cream-colored slip on the front side, and a natural surface on the base. There are patterns in the form of red tears without out... 1454 - Miniature globular jar without a ring base. It has a long neck and a straight rim. Red slip on the exterior of the piece. 1455 - Miniature jar with a flat base, slightly convex body, short neck, and a thickened rim. Red slip on the exterior of the piece. 1456 - Globular vessel without a ring base. It has curved shoulders and a thickened rim. Red slip on the exterior of the piece, except on the base. 1457 - Long-necked globular vessel with a laterally displaced rim. Cream-colored slip on the exterior, except on the base. It has geometric decoration of “yc” spirals whose inner ends are in... 1458 - Miniature zoomorphic effigy (bird). Cream-colored slip. Red decoration on the rim and perpendicular white lines on the body. 1459 - Zoomorphic effigy (turtle), in the form of a sub-globular carinated vessel with a raised rim. It has a lid in the form of a small bowl with a curved base and straight walls. 1460 - Miniature zoomorphic effigy (bird). Cream-colored slip and decoration in red on the rim. It features perpendicular white lines on the body. 1463 - A hollow, truncated cone-shaped, cast gold nose clip with an open side segment and a narrow central body. Its only decoration is a thickening that runs along the two edges of the piece. I... 1464 - Gold and copper laminated artifact. It is badly deteriorated. One of the larger fragments is a curved edge. This is similar to the curved edges of the butterfly shaped pectorals associated... 1465 - Copper pendant. Representation of two standing figures. Parita Assemblage style. 1466 - Miniature jar with a ring base, globular body, and a short neck. It has a laterally displaced rim and a spout handle. Red slip on the exterior of the piece. 1467 - Miniature zoomorphic vessel (bird). Cream-colored slip. The rim is painted red and the body is decorated with perpendicular white lines. 1468 - Miniature vessel with a tripod stand of conical feet. It has a globular body, a thickened rim, and two zoomorphic handles. The handles represent batrachians. Cream-coloured engobe, with ge... 1469 - Short-necked globular vessel with a thickened rim. Red slip on the exterior. 1470 - Jar with a ring base, globular body, long neck, and straight rim. Red slip on the exterior of the piece. 1471 - Tubular jar with a ring base and a short slightly thickened neck. White slip and decoration of alternating red and purple bands which leave the color of the slip visible between them. 1472 - Miniature bowl with a ring base, hemispherical body, and a rim that is thickened on the interior. No impermeable treatment was applied to the interior or exterior. 1473 - Miniature bowl with a tripod base of elongated conical feet. It has a globular body, an everted rim, and a handle that joins the rim to the body. Smooth surface. 1474 - Anthropomorphic bowl-shaped lid. It features red slip and decoration in black, red, and purple. 1475 - Jar with a ring base, globular body, long neck, and a straight thickened rim. Red slip on the exterior of the piece. 1476 - Miniature incense burner in the form of a bipedal bowl, with a flat handle in the shape of a fish tail. White slip and decoration in red, like smudges, on the interior surface. On the exte... 1477 - Sperm whale vertebrae. It is partially cut and polished. 1479 - Belt of dog canines. 1480 - Bone flute. 1481 - Bone flute. 1482 - Collection of tubular beads made from the radius bones of birds. 1483 - Artifact comprising of dog incisors, canines, and molars. 1484 - Polished long bone. 1485 - Cut and polished bone. 1486 - Fragment of cut and polished long bone. 1487 - Perforated tooth. 1488 - Perforated tooth. 1489 - White-tailed deer antler. 1490 - Collection of tubular beads made from bird bones. 1491 - Perforated tooth. 1492 - Ovoid shaped resin bead. It has a perforation and is dark brown in color. 1493 - Conical shaped resin bead. It has a perforation and is yellow in color. 1494 - Drop shaped resin bead. It has a conical form and a perforation. Dark brown in color. 1495 - Cuff made of copper and gold. It was found together with the cuff with registration number AU12092.2. 1496 - Cuff made of copper and gold. It was found together with the cuff with registration number AU12092.1. 1497 - Conical resin beads (2). Each one has a perforation and is dark brown in color. 1498 - Perforated premolars of human, dog, and collared peccary origin. 1499 - Ovoid resin bead with a perforation. It has helical grooves all over its surface and is dark brown in color. There is also a light yellow substance adhered to it which could be another typ... 1500 - Necklace of perforated canines. 1501 - Perforated ovoid resin beads (2). Cream in color. They are not translucent. 1502 - Set of pendants (5), in the shape of mythical beings. 1503 - Pendant in the shape of a mythical being. 1504 - Pendant in the shape of a mythical being. 1505 - Pendant in the shape of a mythical being. 1506 - Pendant in the shape of a mythical being. 1507 - Pendant in the shape of a mythical being. 1508 - Pendant in the shape of a mythical being. 1509 - Bone carved into the shape of a mythical being. It was found badly deteriorated. However, the claws; the large, toothed mouth; the headdress or crest; and its long tail, can still be seen. 1510 - Cut and polished long bone of an animal. 1511 - Cut and polished long bone. 1512 - Distal fragment of a feline tooth. 1513 - Distal fragment of a cut and polished long bone. 1514 - Fragment of an antler from a white-tailed deer 1515 - Fossilized shark's tooth. Only half the tooth was found. 1516 - Fossilized shark’s tooth. It has some retouches on the edges. 1517 - Bone pendant in the shape of a crocodile. In the interior of the perforation were found the cores produced by the perforation process. 1518 - Fragment of a long bone. The epiphysis and part of the diaphysis of the bone are present. 1519 - Set of tubular bone beads. 1520 - Tubular bone beads. 1521 - Perforated teeth. 1522 - Stemmed projectile tips made from chips of translucent white quartz. 1523 - Antler from a white-tailed deer. 1524 - Resin pendant in the shape of a quadruped animal. 1525 - Rosette of an antler from a white-tailed deer. 1526 - Necklace of perforated feline canines. 1527 - Bone fragments from an animal or animals. 1529 - Plate with a low pedestal and a pointed rim. Red slip on the front of the piece and a smooth surface on the back. It is decorated with a red and purple serpentiform figure, and black conto... 1530 - Biconical bone bead. 1531 - Animal bone tubes. They have been cut and polished. Thirteen bone tubes have been calculated to be in this bundle. 1532 - Miniature globular jar with a flat base, extended neck, and a straight rounded rim. Red slip on the exterior. 1533 - Globular jar with a ring base, long neck, and a straight slightly pointed rim. Brick-red slip on the exterior. 1534 - Perforated shark teeth positioned parallel at the base of the tooth and in rows of two. These are the remains of at least two artifacts, possibly two spears. 1535 - Flat-based bowl with slightly convex walls and rim, and a rounded lip. It has whote slip on the interior of the piece. There is no slip on the exterior. It is decorated with red and purpl... 1536 - Globular jar with a ring base, short neck, and a slightly thickened rim. It is covered in white slip and decorated with red and purple bands which leave the white color of the slip visible ... 1537 - Jar with a ring base, globular body, short neck, and a slightly thickened rim. It is covered in white slip and decorated with red and purple bands of similar width which leave the white col... 1538 - Globular jar with a curved base, long neck, and a slightly convex rim. Red slip on the exterior. 1539 - Tubular bone beads. 1540 - Hemispherical bowl with a ring base and a bevelled rim on the interior. Cream color slip on the interior of the piece and a smooth surface on the exterior. 1541 - Hemispherical bowl with a ring base and a rim that is thickened on the interior. There is red slip on the interior and white slip on the rim to which the decoration has been applied. This ... 1542 - Small plate on a pedestal. The rim is slightly concave and the lip is rounded. It has white slip on the interior and red slip on the exterior, except on the pedestal. The lip is decorated... 1543 - Small plate on pedestal. It has a slightly concave rim and a rounded lip. The interior is covered in white slip and there is red slip on the exterior, except on the pedestal. The lip is ... 1544 - Tubular-like vessel on a ring base. It has a short neck and an everted rim. The exterior is covered in white slip on which the decoration has been applied. This decoration is in the form ... 1545 - Globular jar with a ring base and an extended neck. The rim is laterally displaced at an angle of 90 degrees with respect to its axis of symmetry. It has white slip, and is decorated with ... 1546 - Jar with a ring base, globular body, and a long neck. It has a straight rim and a flat lip. Red slip on the exterior. 1547 - Anthropomorphic globular carafe. It has red slip (except on the convex base). The head of the effigy is painted in red, black, and purple on white, representing the patterns of facial deco... 1548 - Anthropomorphic globular carafe. It has red slip (except on the convex base). The head of the effigy is painted in red, black, and purple on white, representing the patterns of facial deco... 1549 - Long-necked globular jar without a ring base. It is covered in white slip, on which are painted red bands of similar diameter which leave the white color of the slip visible between them. 1550 - Miniature hemispherical bowl. There is red slip on the front of the piece. The surface is smooth on the back. 1551 - Tubular bone artifact, decorated with the typical “yc” volutes of the Conte style. 1552 - Proximal fragment of a bone artifact that was shaped into an animal with long, sharp teeth. It has a communication channel between the top and the base, which is why it is believed that it ... 1553 - Perforated shark teeth. 1554 - Shark tooth fossil. It has a very worn or polished tip. 1555 - Group of perforated shark teeth. 1556 - Perforated feline molars. 1557 - Tip of an antler from a white-tailed deer. 1558 - Trapezoidal bone beads (3), with two perforations. 1560 - Discoidal resin bead. It has an unpolished irregular surface. and was found fragmented. 1561 - Caudal spines from ray fish. They were found very fragmented. 1562 - Perforated shark teeth. Various species. 1563 - Fragment of a caudal spine from a ray fish. 1564 - Perforated dog molars (upper left and right, and lower left and right). From the anatomical position in which they were found it is thought that they formed part of a belt. 1565 - Perforated dog teeth, canines and molars. From the anatomical position in which they were found, near the neck of individual I6, they are believed to be the remains of a necklace. 1566 - Manatee rib carved into the shape of a mythical being. The figure has a large, toothed mouth; a crest or headdress of feathers; claws and long tail. It was found in an extremely poor state... 1567 - Discoidal beads with straight edges. They were made from green stones. 1568 - Perforated shark tooth fossil. 1571 - Arrowheads made from the teeth of a Largetooth Sawfish. Each of them has an unnatural groove on one of the edges. 1572 - Remnants of carbonized wood. Due to its location, it is believed to be part of the remains of the wooden lid that covered the offering placed in the excavated grave over the sediment that c... 1573 - Perforated canines and molars from a dog. They were found over the pelvis zone of individuals I5 and I9 in tomb T2. Given their location they have been interpreted as components of a belt. 1574 - Arrowheads made from the teeth of a Largetooth Sawfish. All of them are fragmented. 1575 - Perforated dog molars and premolars. They were found very close to the head of individual I5 in tomb T2, due to this they were catalogued as a necklace. However, given the number of molars... 1576 - Artifact made from perforated shark teeth. 1577 - Arrowheads made from the teeth of a Largetooth Sawfish. 1578 - Caudal thorns from ray fish. 1579 - Perforated dog third molars (lower left and right). 1580 - Perforated dog incisors. Given the anatomical location in which they were found, in the pelvic zone of individual I12, they have been interpreted as the components or elements of a belt. 1581 - Distal fragment of a sperm whale tooth. It is carved and perforated. 1583 - Pendant in the form of a fantastical being. It is not complete. The best preserved part is the head. It has two prominent eyes; a curly nose; pointed ears and prominent lobes; an open mou... 1585 - Fragments of a tortoise shell. 1586 - Rows of perforated shark teeth. These were found on the ribs of individual I12. They were collected together with the ribs, to preserve the anatomical position in which the shark's teeth a... 1587 - Bundle of caudal thorns from ray fish. 1588 - Artifact made from the tooth of a Largetooth Sawfish. It is fractured. 1589 - Perforated dog teeth. Being next to the bones of the hand of individual I4 in unit EU134, it is believed they are the pendants of a bracelet. 1591 - Textile imprint with a “v” pattern found on a block of sediment. 1592 - Perforated shark teeth. 1593 - Perforated dog premolars. 1594 - Harpoon made from the tooth of a sawfish. 1595 - Perforated raccoon molars (2). They form part of an artifact associated with individual I6 made up of 200 upper left and right second molars, and upper and lower left second molars. 1596 - Harpoon made from the tooth of a sawfish. It has ridges and a perforation. 1597 - Peccary tusks. 1598 - Projectile tips (arrow or spear), made from two sawfish teeth. 1599 - Tubular bead made from the radius bones of birds of the genus Ardea. 1600 - Tubular beads made from the radius bones of herons. 1601 - Tubular beads made from the radius bones of storks. 1602 - Perforated shark teeth. 1603 - Projectile tips made from chips of translucent white quartz. 1604 - Projectile tips made from chips of translucent white quartz. 1605 - Group of projectile tips made from chips of chalcedony cores of reddish and ochre tones, and translucent white quartz. 1606 - Discoidal bone bead. 1607 - Perforated shark teeth. 1608 - Pendant made from the tooth of a sperm whale. 1609 - Perforated jaguar canines. 1610 - Necklace of perforated deer incisors. 1611 - Perforated dog canines. 1612 - Caudal thorns from ray fish. 1613 - Perforated dog canines. 1614 - Caudal thorns from ray fish. 1615 - Perforated crocodile tooth. 1616 - Caudal thorn from a ray fish. 1617 - Tubular bone beads. 1618 - A quadrangular artifact apparently made of wood. Pyrolysis analysis indicates that its content is silica. A microscopic analysis indicates that it is mineralized. Its study is in progress. ... 1619 - Perforated dog canines. 1620 - Perforated phalanges. They were found in the area of the head of individual I4 so they are believed to be the remains of a necklace. 1621 - Perforated phalange. 1622 - Rays (fins)(7); bracnchiostegal ray (1); gills (3); and vertebrae (3) of a puffer fish collected from the remains of the skull and jaw of individual I4. 1623 - Tooth fragments. 1624 - Point of a deer antler. It is perforated and polished. 1625 - Falange perforada. 1626 - Caudal thorns from ray fish. 1627 - Caudal thorn from a ray fish. 1628 - Perforated shark tooth. 1629 - Perforated shark teeth. 1630 - Fish bone. 1631 - Caudal thorns from ray fish. 1632 - Perforated shark teeth. 1633 - Perforated premolars. 1634 - Perforated shark teeth. 1635 - Perforated jaguar canines. They were found fragmented. 1636 - Caudal thorn from a ray fish. 1637 - Perforated dog canines. 1638 - Perforated dog canines. 1639 - Crown of a canine from a jaguar. 1640 - Perforated human premolar. 1641 - Perforated human teeth and premolars. 1642 - Caudal thorn from a ray fish. 1643 - Caudal thorns from ray fish. 1644 - Perforated dog teeth and canines; and perforated human teeth, canines and premolars. 1645 - Perforated jaguar canine. 1646 - Perforated human teeth, canines and premolars. 1647 - Teeth, perforated human premolars and canines. 1648 - Bird bone. 1649 - Fragments of caudal thorns from ray fish. 1650 - Perforated shark teeth. 1651 - Perforated shark teeth. 1652 - Perforated shark teeth. 1653 - Perforated human tooth. 1654 - Perforated dog premolars. 1655 - Perforated dog premolars. 1656 - Shark’s tooth. 1657 - Perforated shark teeth. 1658 - Discoidal beads with blunt edges. They are made from dark green stones. 1659 - Discoidal beads with straight edges. They are made from light green stones. 1660 - Projectile tips made from chips of red chalcedony. 1661 - Discoidal beads with straight edges. They are made from light green stones. 1662 - Discoidal beads with straight edges. They are made from green stones. 1663 - Discoidal beads with straight edges. They are made from light green stones. One of them, the largest, is made from a stone that is dark green in color. 1664 - Projectile tip made from a chip of translucent white quartz. 1665 - Stemmed projectile tip made from a chip of translucent white quartz. 1666 - Discoidal beads with straight edges. They are made from light green stones. One of them is a bead with a blunt edge. A dark green stone was used in its manufacture. 1667 - Artifiact made from two varieties of green stone. They are blunt and straight edged, and biconical. 1668 - Stemmed projectile tip made from a chip of red chalcedony. 1669 - Projectile tips made from chips of translucent white quartz. 1670 - Projectile tips (2), made from chips of red chalcedony. 1671 - Stemmed projectile tip made from a chip of cream-colored chalcedony. 1672 - Stemmed projectile tip made from a chip of cream-colored chalcedony. 1673 - Projectile tip made from a chip of white chalcedony. 1674 - Stemmed projectile tip made from a chip of chalcedony that is white and cream in color. 1675 - Projectile tip made from a chip of white chalcedony. 1676 - Projectile tip made from of a chip of chalcedony that is grey and cream in color. 1677 - Stone with a shiny surface (polished). 1678 - Stemmed projectile tip made from a chip of white chalcedony. 1679 - Stemmed projectile tip made from a chip of red chalcedony. 1680 - Stemmed projectile tip made from a chip of red chalcedony. 1681 - Stemmed projectile tip made from a chip of red chalcedony. 1682 - Discoidal beads with both straight and blunt edges, made from dark green stones. 1683 - Discoidal beads with both straight and rounded edges. One of the beads in this group is biconical. They are made from dark and light green stones. 1684 - Artifact comprising of two varieties of discoidal beads (straight edges and blunt edges), and biconical beads. They are made from dark and light green stones. 1685 - Discoidal beads with straight edges. One of them has a blunt edge. They are made from dark green stone. 1686 - Projectile tip made from a chip of translucent quartz. 1687 - Projectile tip made from a chip of translucent quartz. 1688 - Projectile tip madefrom a chip of chalcedony that is red and cream in color. 1689 - Stemmed projectile tip made from a chip of red chalcedony. 1690 - Projectile tip made from a chip of white chalcedony. 1691 - Projectile tips made from chips of red chalcedony. 1692 - Discoidal beads with straight edges (2), and biconical beads. They are made from dark and light green stones. 1693 - Stemmed projectile tip made from a chip of red chalcedony. 1694 - Discoidal beads with straight edges. They are made from dark and light green stones. 1695 - Discoidal beads with two types of edges (rounded or blunt, and straight), made from dark and light green stones. 1696 - Discoidal beads with straight edges, made from light green stones. 1697 - Discoidal beads with straight edges made form light green stones. 1698 - Discoidal beads with blunt edges (2) and straight edges (1), made from dark and light green stones. 1699 - Biconical beads made from light green stones. 1700 - Discoidal beads with straight edges (6) and blunt edges (1). They are made from dark and light green stones. 1701 - Discoidal beads with blunt edges made from dark green stones. 1702 - Fragment of a caudal thorn from a ray fish. 1703 - Caudal thorn from a ray fish. 1704 - Caudal thorn from a ray fish. 1705 - Artifact, possibly a pectoral, composed of several rows of tubular bird bone beads and one row of human teeth. 1706 - Perforated dog molars, premolars, and incisors. 1707 - Fragments of caudal thorns from ray fish. 1708 - Caudal thorn and fragments of caudal thorns from ray fish. 1709 - Fragments of caudal thorns from ray fish. 1711 - Fossil of a megalodon tooth. It is not perforated and shows no signs of hafting or use, yet the tooth edge is blunt (no sharp edge). Being a fossil it is possible that this is due to a nat... 1712 - Fragments of caudal thorns from ray fish. 1713 - Elongated artifact with at least four perforations and a semicircular cut on one of its edges. It is broken and has a yellowish sticky material on it. 1714 - Trapezoidal bead. It has a perforation. 1715 - Perforated phalange. 1716 - Perforated phalange. 1717 - Peforated teeth, premolars and molars. 1718 - Fragments of caudal thorns from ray fish. 1719 - Artifact of perforated teeth and canines. Various species. 1720 - Flute made from a perforated polished bird bone. It has a least three perforations. It is fragmented and incomplete. 1721 - Perforated feline canines. 1722 - Perforated feline canine. 1723 - Perforated dog canines. 1724 - Perforated dog molars, and a perforated human tooth. 1725 - Polished and cut sawfish tooth. 1726 - Caudal thorn from a ray fish. 1729 - Tubular bone beads. 1730 - Dog molars and canines. 1731 - Perforated shark teeth. 1732 - Perforated shark teeth (various species). 1734 - Shark tooth. 1735 - Dog premolar. 1736 - Perforated canine. It is fragmented. 1737 - Perforated shark teeth. 1739 - Discoidal beads of two varieties (straight edged and blunt edged), made from the cores of dark green stones. 1740 - Discoidal beads with straight edges and biconical beads, made from of dark and light green cores. 1741 - Discoidal beads of two varieties (straight edged and blunt edged), and biconical beads. They are made from dark and light green cores. 1742 - Discoidal beads of two varieties (straight edged and blunt edged), and biconical beads. They are made from the cores of dark green and light green stones. 1743 - Discoidal beads with straight edges and biconical beads, made from the cores of dark green and light green stones. 1744 - Perforated canine. It is very fragmented. 1745 - Fragments of tubular bird bone beads. 1746 - Fragmented shark tooth. It is perforated. 1747 - Fragments of tubular bird bone beads. 1748 - Perforated canine. 1749 - Small bone. 1750 - Perforated human teeth. 1751 - Perforated incisors, canines, and molars. 1752 - Perforated teeth. 1753 - Tubular bone beads. 1754 - Perforated teeth. 1755 - Fragments of tubular bone beads. 1756 - Perforated incisors. 1757 - Perforated canines. 1758 - Perforated canine. 1759 - Perforated premolar. 1760 - Fragment of a dog's canine. 1761 - Long bone. It has a thick orange patina adhered to it. 1762 - Shark teeth. 1763 - Perforated canine. 1764 - Perforated tooth. It is very fragmented. 1765 - Perforated premolars and incisors. 1766 - Perforated incisor. 1767 - Fragments of tubular bone beads. 1768 - Perforated incisor. 1769 - Perforated molar. 1770 - Perforated dog canine. 1772 - Perforated molar. 1773 - Perforated tooth. 1774 - Perforated incisor. 1775 - Perforated incisor. 1776 - Perforated human teeth, premolars, and canines; and perforated dog teeth and canines. 1777 - Perforated human teeth, canines, premolars and molars. 1778 - Perforated teeth. 1779 - Perforated human teeth, premolars and molars; and perforated dog canines and molars. 1780 - Perforated human teeth, premolars and molars; and perforated dog canines. 1781 - Tubular bird bone beads. 1782 - Perforated human teeth, canines, premolars and molars; and perforated dog teeth and premolars. 1783 - Perforated molars and canines. 1784 - Perforated canines. 1785 - Perorated feline canine tooth. 1786 - Perforated canines. 1787 - Fragment of a caudal thorn from a ray fish. 1788 - Caudal thorns. 1789 - Perforated shark teeth. 1790 - Tubular bird bone beads. 1791 - Caudal thorn from a ray fish. 1792 - Perforated human teeth, premolars and molars; perforated dog canines and teeth; and tubular bird bone beads. 1793 - This collection of bones and teeth contains: perforated human teeth, premolars, molars and canines; perforated dog teeth, canines and premolars; perforated shark teeth; tubular bird bone bea... 1794 - Bone harpoon. 1795 - Pebble or stone hammer. 1796 - Discoidal beads with straight edges, made from the cores of dark green and light green stones. 1797 - Discoidal bead with a straight edge, made from the core of a light green stone. 1798 - Discoidal bead with a straight edge, made the core of a dark green stone. 1799 - Zoomorphic bead made from a core of dark green stone. 1800 - Shell fragment. 1801 - Mollusk shell. 1802 - Discoidal bead made from orange-colored shell. It is very deteriorated. 1803 - Discoidal orange-colored shell bead. 1804 - Pink triangular shell beads. 1805 - Discoidal orange shell bead. 1806 - Biconical shell beads. 1807 - Discoidal orange-colored shell bead. 1808 - Lips of gastropod shells. They were found inside a large pot with registration number 1001. 1809 - Shell of Anadara grandis. 1810 - Shell of Anadara grandis. 1811 - Discoidal shell bead. 1812 - Effigy metate (mealing stone), which represents a quadruped. 1813 - Four-legged metate (mealing stone) with anthropomorphic designs sculpted in relief on them. 1814 - Mano (hand stone). 1815 - Artifact of discoidal, triangular, and tubular shell beads which are orange and pink colored. 1816 - Very thin-walled artifact made of a gold and copper alloy. It was found adhered to the bones of a cranium. 1817 - Discoidal, triangular and biconical bead artifact of orange and pink shells. 1818 - Discoidal shell beads. 1819 - Discoidal, tubular, triangular, and biconical shell beads. 1820 - Triangular shell bead. 1821 - Discoidal shell bead. 1822 - Artifact of tubular, triangular, and discoidal shell beads. 1823 - Biconical bone bead. 1824 - Sheets of gold and copper. Very oxidized. 1825 - Discoidal shell bead. 1826 - Fragment of a mollusk shell. 1827 - Fragment of a mollusk shell. 1828 - Projectile tips (3) made from sheets from a core of translucent white quartz. 1829 - Projectile tip made from a sheet from a core of translucent white quartz. 1830 - Biconical beads made from dark green and light green stones. 1831 - Projectile tips (3) made from sheets from a core of translucent white quartz. 1832 - Pebble. 1833 - Crystal of translucent white quartz. 1834 - Discoidal mirror base. It retains traces of pyrite adhered to one of its sides, and has a central perforation. 1835 - Projectile tip made from a sheet coming from a core of red chalcedony. 1836 - Biconical beads made from the core of a green stone. 1837 - Crystal of translucent white quartz. 1838 - Biconical beads made from one or various cores of green stone. 1839 - Rectangular stone adze. It is polished, especially on the body and the distal part. It also has traces of the stone cutting process along the edge and heel. 1840 - Pointed trapezoidal stone adze. It shows traces of the stone cutting process. Only the distal part is ground and polished. 1841 - Almond-shaped stone adze. It was ground after it had been cut or carved, however, the scars of the cutting process can still be appreciated, especially along the edge. The distal part is ... 1842 - Stone axe. It has the characteristics of both almond-shaped axes (curved front), and those of trapezoidal axes on its body and heel. The distal part is polished. The rest of the body of t... 1843 - Trapezoidal stone adze. It has been polished and shined. The surface is very smooth and regular. 1844 - Trapezoidal stone adze. It has been completely polished and shined. Very regular surface. 1845 - Pentagonal stone axe. It has been polished but has marks from the stone cutting process on the edges and heel. 1846 - Almond-shaped stone axe. It has a completely polished surface. 1847 - Stone chisel. 1848 - Group of stone axes and adzes, and a stone chisel. 1849 - Projectile tip made from a chip of green chalcedony. 1850 - Trapezoidal stone adze. It has a completely polished surface. 1851 - Trapezoidal stone axe. It is polished yet the marks from the stone cutting process are still preserved on the edges. 1852 - Projectile tips made from chips of white quartz, and red and green chalcedony. 1853 - Trapezoidal stone adze. The surface has been polished and shined. 1854 - Trapezoidal stone adze. It has been polished and shined but the marks from the stone cutting process can still be seen on the edges. 1855 - Trapezoidal stone adze. It has been polished but retains large marks from the stone cutting process along the lateral edges and the heel. 1856 - Oval-shaped stone fragment. Polished surface. Unknown use and function. 1857 - Discoidal beads with blunt edges, and biconical beads (two sizes). All of them are made from dark green and light green stones. 1858 - Projectile tip made from a chip of translucent white quartz. 1859 - Three-legged metate (mealing stone). 1860 - Trapezoidal stone adze. Only on the working (distal) edge, and part of the body have been polished. Marks from the stone cutting process are conserved on the lateral edges and the heel. 1861 - Pebble. On some parts, the surface is polished or worn. 1862 - Trapezoidal stone adze. It has a very polished distal (working) end, and the rest of the surface is ground (especially the back of the artifact). The marks from the stone cutting process c... 1863 - Spherical stone with a very polished and shined surface. However, the traces of the chipping carried out prior to these two processes can be appreciated, giving shape to the artifact. 1864 - Trapezoidal stone adze. It is ground and polished on all of its surface yet still retains the marks from the stone cutting process (the procedure prior to the grinding and polishing), espec... 1865 - Projectile tip made from a chip of translucent white quartz. 1866 - Proximal fragment of a sheet of basalt. 1867 - Projectile tip made from a sheet of cream-colored chalcedony. 1869 - Projectile tips (2), made from sheets of cream-colored chalcedony. 1870 - Projectile tips (5), made from sheets of cream-colored chalcedony, and a chip of translucent white quartz. 1871 - Projectile tips (10), made from sheets of cream-colored chalcedony, and chips of translucent white quartz. 1873 - Projectile tip made from a chip of red chalcedony. 1874 - Trapezoidal stone adze. It is very polished and shined yet it still retains some deep marks from the stone cutting process especially on the front and lateral edges. 1875 - Triangular shell beads. 1876 - Discoidal shell bead. 1877 - Projectile tip made from a chip of translucent white quartz. 1878 - Stone spokeshave made from a trapezoidal chip of red chalcedony. It has a prominent bulb of percussion. 1879 - Fragment of a pebble of cream-colored chalcedony. It does not have cortex. 1880 - Almond-shaped stone axe. It has a very polished distal surface. The rest of the artifact is ground yet marks from the cutting of the stone (the procedure of shaping before the grinding), c... 1881 - Projectile tip made from a sheet of ceam-colored chalcedony. 1882 - Almond-shaped stone exe. The distal (working) surface, and parts of the body are well polished and shined. The rest of the artifact (lateral edges and heel), have been ground yet the marks... 1883 - Pebble. 1886 - Globular vessel with a curved base, short neck and thickened rim. Red and white slip. Geometric decoration of simple "yc" spirals with claw-shaped inner ends. 1887 - Large anthropomorphic vessel. Globular body without a ring base. It has a support handle on the back. On the globular body there is a modeled human head over which projects a long neck w... 1889 - Collection of peforated teeth from humans and different species of animals. They were found within the interior of the gold cuff with registration number AU12015. 1890 - Perforated teeth found within the interior of the cuff with registration number AU12016. 1891 - Plate on a low pedestal. There is white slip on the front of the piece, on which has been applied the polychrome decoration. The symmetrical fields of decoration are divided en two by a re... 1892 - Rectangular tray with a ring base and raised rim. Red slip on the front and white slip on the back. The decoration, which is located on the reverse side only, consists of red and purple ba... 1893 - Globular jar with a curved base, long neck, and a rounded straight rim. It is covered in white slip on which is applied the decoration. This consists of alternating red and purple bands, w... 1894 - Zoomorphic jar with bird-shaped appliqués. It has red slip on the lower part, and white slip on the upper part. 1895 - Miniature vessel with a tripod base, globular body, and straight rim. Two zoomorphic handles join the body to the rim of the vessel It has cream-colored slip on which are painted geometric... 1896 - Bone flute. It is broken but it can be seen that it had at least four finger holes. 1897 - Perforated dog canines. 1898 - Mano (hand stone). 1899 - Tubular gold bead. 1901 - Circular accessory with the design of a face of a mythical being on the interior. It is broken but an eye, nose, and an open mouth with many teeth, can still be seen. The face is surrounde... 1902 - Ear rod cap. It has, as decorative elements, a cone in the centre that projects outwards with short embossed parallel lines radiating from it, and an embossed braid around the edge. 1903 - Copper chisel. 1904 - Tubular bead. 1905 - Fragments of copper oxide. 1906 - Tubular bead. 1907 - Copper chisel. 1908 - Circular gold bead. 1909 - Gold chisels. 1910 - Tubular gold ear rod. 1911 - Anthropomorphic vessel. 1912 - Rectangular polychrome tray. Red slip on the front of the piece and white on the back. Decoration of convergent "yc" spirals on the back, with claw terminations on the inside of the volute... 1913 - Bowl with a flat circular base, and slightly convex walls and rim. White slip on the interior and a natural surface on the exterior. It is decorated with alternating red and purple bands o... 1914 - Bowl with a high ring base and slightly convex walls and rim. White slip on the interior and exterior of the piece. On the interior, zoomorphic bird patterns have been applied to the walls... 1915 - Concave bowl on a pedestal. It has a raised rim. The black color is a product of the firing of the piece in an enclosed space. 1916 - Globular vessel without a ring base. It has a long neck, and a laterally displaced rim. It is covered in white slip and painted with convergent “yc” spirals that have saurian designs o... 1917 - Circular shaped bowl with a high ring base, and slightly convex walls and rim. White slip on the interior and exterior of the piece (with the exception of the ring base). The back is decor... 1918 - Rectangular tray with white slip on the exterior and red slip on the front of the piece. The raised rim is decorated with geometric patterns. The exterior is painted with red and purple sp... 1919 - Ceramic piece made up of a bowl and a zoomorphic effigy that represents a bicephalous turtle. It is covered in white slip on which are painted circular patterns in red and black that repres... 1920 - Bowl on a circular-shaped pedestal with slightly convex walls and rim. Red slip on the interior and exterior. It is decorated with figures of white fish outlined in black. 1921 - Plate with a ring base. Red slip on the exterior and white on the front on which the polychrome decoration has been applied. The lip is decorated with bands of colors evoking the color pa... 1922 - Bowl on a pedestal. White slip on the interior and on the lip. It is also decorated with a zoomorphic (crustacean) pattern. 1923 - Anthropomorphic effigy. 1924 - Globular vessel with a ring base, long neck, and a rim that is pointed on the exterior. Red slip. 1925 - Globular jar with a curved base, long neck, and a laterally displaced rim. White slip on which the pictorial decoration of geometric patterns has been applied. The body is decorated with r... 1926 - Small globular jar with a ring base, short neck, and a rounded rim. Red slip on the exterior, except on the interior of the ring base. 1927 - Zoomorphic vessel. It has a globular body without a ring base, a neck in the shape of a bird, and a thickened rim. 1928 - Bowl that represents a turtle. Blackened surface as a result of the firing of the piece in an enclosed space. 1929 - Globular like jar with a ring base, short neck, and a thickened rim. White slip and decoration of red bands of a similar diameter. 1930 - Tripod bowl that represents a turtle. Blackened interior and exterior surface as a result of the firing of the piece in an enclosed space. 1931 - Small globular jar with a ring base, short neck, and straight rim. Red slip on the exterior, except on the interior of the ring base. 1932 - Biconical pedesatal with a fine red slip. 1951 - Jar with a globular body, long neck, and a laterally displaced rim. Red slip on the exterior of the piece. 1952 - Plate on a pedestal. Red slip on the front and back of the piece. 1953 - Zoomorphic effigy (turtle). Red and white slip on which are painted, in black, the zoomorphic features of the piece. 1954 - Rectangular tray, with an elliptical base, and a raised rim. Red slip on the front, and white slip on the back and areas of the interior rim. The rim is decorated with geometric patterns. ... 1955 - Anthropomorphic effogy. Red and white slip on which the facial decoration was applied in the form of a red mask.
Representation of an ancient coclé warrior. 1956 - Hemispherical bowl on a pedestal. Red slip on the exterior and white slip on the interior. The interior was decorated with the design of a saurian in a bipedal stance 1958 - Bowl on a pedestal. It has a flat base, and slightly convex walls and rim. Red slip on the exterior and white slip on the interior. The interior, central panel, is decorated with an abst... 1959 - Globular jar with a ring base, long neck, and a laterally displaced rim. White slip on the exterior, with decoration of alternating red and purple bands, which leave the white color of the ... 1960 - Small vessel with a ring base, globular body, and a thickened rim. It has two ribbon handles that join the body and rim. Red slip on the exterior. 1963 - UE089. Deposit of ceramic vessels from the Conte and Macaracas complexes. It measures about 0.5 meters long by 0.60 meters wide. The materials have an inclination of 80 degrees to the west... 1964 - UE093. Group of large vessels, with smooth surfaces caused by erosion (some of them preserve the red slip in areas). They were found at a depth of 0.30 m, very close to the NW edge of tomb... 1965 - EU100. Deposit of dispersed human bones in a surface of two m2 with areas of greater density. It contains small fragments of skull, some teeth, a femur, a tibia and a fibula, all of them bon... 1966 - UE082. Deposit of ceramics and stone artefacts, originally quadrangular, with the corners oriented towards the four cardinal points. It was destroyed, in part, by the excavation of the grav... 1968 - UE109. Set of ceramics, mostly high red pedestals. There are also two metates and two hand grinders. Some shark teeth and a whole late pitcher were also found. One of the metates is an effi... 1969 - EU138. Ceramic deposit and remains of a wooden decking, located at a depth of 3.48 m (upper level) and 3.31 m (lower level). The remains of the parquet have parallel black veins which give i... 1970 - Plate on a pedestal. White slip on the front of the piece. It is decorated with a zoomorphic (crustacean) pattern on the central panel. The rim is decorated with alternating bands of colo... 1971 - Globular jar with a ring base, long neck, and a laterally displaced rim. It is covered in white slip on which the decoration the decoration has been applied. This decoration consists of re... 1972 - Cylindrical jar with a ring base, long neck, and a thickened rim. It is covered in white slip on which has been applied the geometric decoration of divergent spirals with claw-shaped inner ... 1973 - Small plate on a pedestal. White slip on the front, and a natural surface on the back of the vessel. The decoration is on two panels separated a red stripe. The decoration is geometric wi... 1974 - Small plate on a pedestal. White slip on the front, and a natural surface on the back of the vessel. The decoration is on two panels separated a red stripe. The decoration is geometric wi... 1975 - Bowl on a pedestal. It has red slip only on the front of the piece. 1976 - Plate with red slip exclusively on the front of the piece. 1977 - T1-I02. Subject in supine decubitus position with face pointing to the right. The upper limbs were arranged parallel to the body, with the forearms pronated and the hands on the hip. The l... 1978 - T1-I03. The subject in supine decubitus position with the face pointing towards the right. The upper limbs were stretched parallel to the body, with the forearms in semi-pronation and pres... 1980 - T1-I05. The subject was in supine decubitus position with the face pointing to the right. In the case of the upper limbs, the humeri presented incomplete lateral abduction. The right elbo... 1981 - T1-I06. Subject in supine decubitus position with the face in the frontal position. The right arm was completely extended while the left showed slight lateral abduction. The absence of bo... 1983 - T2-I01. Subject lying in prone position with the face resting directly on the floor. The left arm had a slight lateral abduction with the elbow forming an angle of about 160° and the forear... 1984 - T2-I02. Individual lying in prone position with the face resting on the left side. The upper limbs were arranged with some lateral abduction and with the arms flexed 45º in pronation, so th... 1985 - T2-I03. Subject deposited lying in prone position with the face resting directly on the bed of the grave. As for the position of the upper limbs, the right arm had incomplete lateral abduct... 1986 - T2-I04. Individual placed lying in prone position with the face pointing to the left. The upper limbs were arranged parallel to the body. The position of the hands is unknown due to their ... 1987 - T2-I05. Individual deposited lying in prone position with the face resting on the right side. It is in a very poor state of preservation due to the fact that the bundle of bones P1 was pla... 1988 - T2-I06. Young adult male between 18-20 years old. Age was estimated on the basis of the relationship between occlusal wear and age, and the absence of degenerative disease. The poor state o... 1989 - T2-I07. Male adult between the ages of 40-50, therefore a mature adult. Age was estimated based on the relationship between occlusal wear and age, and the presence of degenerative joint dis... 1990 - T2-I08. I8 is an adult male individual between the ages of 18 and 20. Age was estimated based on the relationship between occlusal wear and age, and the absence of degenerative joint disease... 1991 - T2-I09. Adult male individual between 20-25 years of age. The age was estimated on the basis of the relationship between occlusal wear and age.

The poor state of conservation and pr... 1992 - T2-I10. Adult male between the ages of 20 and 25. Age was estimated on the basis of the relationship between occlusal wear and age. The poor state of conservation and preservation made it im... 1993 - T2-I11. Adult male between the ages of 25 and 30. Age was estimated on the basis of the relationship between occlusal wear and age. The individual had a rather robust constitution with a ve... 1994 - T2-I12. Young male, between 18 and 20 years of age, according to the occlusal wear and tear-age ratio.

The individual had a robust build with a markedly linea aspera on the femurs. ... 1995 - T2-I13. Young male between the ages of 20-25, therefore a young adult. The age was estimated on the basis of the relationship between occlusal wear and age. The individual had a robust buil... 1996 - T2-I14. Adult male, between 25-30 years old, according to the relationship between occlusal wear and age. He had a callus on the distal third of his left ulna as a result of a fracture susta... 1997 - T2-I15. Young male individual, 16-18 years old, based on the relationship between occlusal wear and age, and the non-eruption of the upper third molar. In terms of bone maturation, he was th... 1998 - T2-I16. Adult male, between 18 and 20 years old. The age was estimated based on the relationship between occlusal wear and age, and the non-eruption of the upper third molar.

Their ... 1999 - T2-I17. Adult male individual between 20-25 years of age, according to the occlusal wear and tear to age ratio.

In general, they had a very robust build, with a very marked linea as... 2000 - T2-I18. Adult male, 18-20 years old. The age was estimated based on the relationship between occlusal wear and age, and the non-eruption of the upper third molar. The individual had a robus... 2001 - T2-I19. Adult male, 18-20 years old. Age was estimated based on the relationship between occlusal wear and age and the non-eruption of the upper third molar. In general the individual had a... 2002 - T6-I01. Of this individual, only the skull was found, which was placed in a prone position with the face resting directly on the bottom of the pit. The poor state of preservation and the ab... 2003 - T6-I02. Individual deposited in supine decubitus position. Only the bones of the legs are preserved, in the SW direction. The rest of the skeleton was destroyed by the excavation of the pit ... 2004 - T6-I03. Individual deposited in supine decubitus position. This is an adult individual. Like individual I2, only the legs are preserved, which point in a SW direction,. The rest of the skel... 2005 - Individual located on top of Individuals 22, 27 and 19. Individual 1 was on the NW edge of the pit, placed in prone position, and perpendicular to the main central axis of the tomb, in a SW-... 2006 - T7-I02. Female individual. Calculated age of 35 and 45 years from tooth wear. Height could not be determined as no complete long bones were preserved.

Individual situated on top of ... 2007 - T7-I03. Subadult individual, so no consideration was given to estimating their sex. Calculated age from 14 to 16 years from tooth wear. Height estimated between 153-157 cm.

Individ... 2008 - T7-I04. An immature individual, with a large number of grave goods, the sex was not determined, although the jawbone had a chin with a very masculine morphology. Age: the development and eru... 2009 - T7-I05. Infant individual, sex was not estimated. Age: Subadult, based on tooth development and eruption, the age would be between 7 and 10 years old. Height would be between 74 and 98 cm. 2010 - T7-I07. Male individual. Age: Based on tooth wear, this would be an adult between 35 and 45 years old. The presence of incipient osteoarthritis in the vertebrae also supports this estimate.<... 2011 - T7-I06. Adult individual, female, by the morphology of the coccyx. Age: from the morphology of the recovered auricular surface and the observed dental wear, it would be between 25 and 35 yea... 2012 - T7-I08. Male individual by the shape and robustness of the skull (glabellar region, supraorbital region and inion) and the robustness of all the long bones recovered, especially in the arms,... 2013 - T7-I09. Subadult individual, sex could not be determined. Age: Infant, based on tooth development and eruption, the estimate is between 9 and 12 years old. From the length of the long bones ... 2014 - T7-I10. Male individual, based on the morphology of the recovered skull and jaw. The skull was partially reconstructed. It is very masculine, with large mastoid processes and large, robust s... 2015 - T7-I11. Male individual, based on the morphology of the skull and jaw. The skull is very masculine, with very pronounced and masculine supraciliary arches and inion. The remains of the jawbo... 2016 - T7-I12. Female individual, based on the morphology of the recovered right coxal. The sciatic notch is very feminine, with a preauricular sulcus. Age: ADULT, by the tooth wear between 25 and ... 2017 - T7-I13. Female individual based on the gracility of the recovered bones. The diameter of the humeral head would also indicate a female individual.

Age: Young adult, with completed ... 2018 - T7-I14. Being a subadult individual, it was not considered desirable to determine the sex. Age: Subadult. According to epiphyseal unions, this is a young individual, close to maturity, bet... 2019 - T7-I15. Male individual on account of the great robustness of all the bones present. Age: Adult, between 25 and 35 years old. Height: according to the maximum length of the left femur taken ... 2020 - T7-I16. Male individual given the high level of robustness of all the bones present. Age: adult, based on tooth wear somewhere between 35-45 years. The wear is much greater on the front teet... 2022 - T7-I18. Female individual, based on the morphology of the recovered right coxal. The sciatic notch is very feminine. Most of the discriminants extracted from the variables of the postcranial... 2023 - T7-I19. Sex not determined as this is a subadult individual. Age: subadult, between 15 and 17 years old, based on the fusion of the epiphysis and the shape of the body of the recovered verte... 2024 - T7-I20. Male individual based on the great robustness of the few bones recovered, for which variables have returned male values in all cases. Age: This is an adult individual, with completed... 2025 - T7-I21. Sex not determined as it is a subadult individual. Age: Subadult based on the recovered epiphyses, diaphysis sizes and vertical diameter of the right femoral head, between 13 and 15 ... 2026 - T7-I22. Sex not determined due to the fact that it is an infant individual. Age: infant. Based on the development and eruption of the teeth, it was an individual of about 12 years +/- 30 mon... 2027 - T7-I23. SEX: not determined, since it was considered an infant individual. AGE: subadult. Based on dental development and eruption, this is an individual aged 12 years +/- 30 months. HEIGHT:... 2028 - T7-I24. Male individual very robust in all bone pieces recovered. Although he was considered an individual with incomplete bone growth, the large sciatic cleavage was very masculine. Age: ... 2029 - T7-I25. Male individual, based on the large sciatic notch and the great robustness of all the long bones recovered. Age: Adult on the basis of tooth wear and morphology of the auricular surf... 2030 - T7-I26. Sex not determined, since the individual was a subadult. Age: subadult. Based on the stage of dental development and eruption, it would have been an individual between 9 and 11 years... 2031 - T7-I27. Sex not determined due to the fact that it is an infant individual. Age: this was calculated from the lengths of the long bones recovered, resulting in a range of 9 to 12 years, base... 2032 - T7-I28. Female individual given the generalised gracefulness of all the recovered bones. Age: between 35 and 45 years old. Height: based on the maximum length of the femurs, would have been ... 2033 - T7-I29. Male individual, based on the recovered coxal and cranium fragments, very masculine. Age: Adult. On the basis of tooth wear, the closure of the cranial sutures and the morphology of ... 2034 - T7-I30. Male individual given the general robustness of the individual, especially in the long bones of the legs and the morphology of the recovered cranial bones. Age: Young adult, between ... 2035 - T7-I31. Male individual given the great robustness of the skull, in the glabellar, supraorbital and inion areas. This is also true of the postcranial skeleton, especially in the arms. The hu... 2036 - T7-I33. Female individual based on the large sciatic notch recovered from the right coxal, very open, very feminine. Age: Young adult, between 25 and 35 years old, taking into account the mo... 2037 - T7-I35. As this is a subadult individual, determining the sex was not considered, although all the discriminants of the right humerus (Ríos, 2005), return male results. Age: Based on the de... 2038 - T7-I36. Male individual given their general robustness. Discriminants also indicate this, both in the lower and upper extremities (left humeral epicondyle width). Age: young adult, with bone... 2039 - T7-I37. Male individual, based on the recovered coxal fragment and the morphology of the sciatic notch. The general robustness is also significant, very masculine. Age: adult. Based on the ... 2040 - T7-I38. Male individual due to the morphology of the recovered cranial fragments belonging to sexually dimorphic regions, such as the inion, the glabella or the mastoid processes. Age: Young... 2041 - T7-I39. Individual situated beneath Individual I28 and above Individual I37. Individual I39 was in the centre of the grave, on the major central axis of the tomb.

Only the skull was... 2042 - T7-I40. Male individual based on the fragments of the recovered skull, which included dimorphic areas, such as the mastoid process, inion area or glabella. Also the fragments of arms which ... 2043 - UE005. Very compacted soil level. It is reddish brown in color (wet), with few roots and very little charcoal. The granulometric composition is fine-very fine with clays and silts predominat... 2044 - T7-I42. Male individual given the large size of the mastoid processes and the general robustness of the recovered bone remains. Age: adult between 35 and 45 years of age based on tooth decay... 2045 - T7-I43. SEX: Being a subadult individual, its determination would not have been considered accurate.

AGE: Subadult. Based on the epiphyseal junction, the development and eruption of... 2046 - T7-I44. Male individual on the basis of the fragments recovered of the large sciatic notch, which is masculine. Age: Young adult, between 25 and 35 years old, based on the morphology of the ... 2047 - T7-I45. SEX: could not be specified, due to the scarcity of bone remains recovered. AGE: young individual, close to maturity. Between the ages of 16 and 18, based on the morphology of the ve... 2049 - T7-I46. SEX: could not be determined, due to the scarcity of bone remains recovered.

AGE: young individual, close to maturity. Between the ages of 16 and 18, based on the morphology... 2051 - T7-I47. SEX: Undetermined, as this was a juvenile individual. AGE: From the development and eruption observed in the few teeth that were recovered, this was a juvenile individual between the... 2052 - T1-I01. Adult individual of undetermined sex. Only part of the bones of the legs and arms were found. They were placed with the dorsal ulna extended. 2053 - T1-I04. Adult male individual. Placed in an extended supine position in a south-east/northeast direction along the major axis of the tomb T1. 2054 - UE008. Fill of very compacted clayey brown soil (not as much as stratigraphic unit UE006). There is a large number of small pieces of charcoal and reddish clay patches distributed throughout... 2057 - UE011. Fill of very compacted black earth, burnt in some zones, of fine granulometry where clayey components predominate. Although it also contains sands and remains of organic matter. Circu... 2058 - UE012. Fill of fairly compacted black earth with burnt remains. Clays predominate over sandy and organic components. It has a circular shape in plan, with a diameter of 13 cm and a maximum t... 2059 - UE013. Fill of black earth with charcoal. It has a circular shape in plan, with a diameter of 11 cm and a maximum thickness of 21 cm. Charcoal sample 1677 was collected, and all of the earth... 2060 - UE014. Fill of dark brown soil, of high compaction, with fragments of charcoal (from 0.5 to 3 cm), in its composition. Granulometrically, clay components predominate, although there are some... 2061 - UE015. Fill of dark brown earth with clayey patches (orange-reddish-black), charcoal fragments, and ceramics. The compaction is high, with clays predominating in its composition, although it... 2062 - UE016. Fill of brown earth, of high compaction and fine granulometric composition, with clayey materials. It is circular in plan, with a diameter of 22 cm, and a maximum thickness of 21 cm. ... 2063 - UE017. Fill of dark brown earth, with burnt remains and high compaction. The granulometry is fine, with clays predominating over sands and organic matter. It has a circular shape in plan, wi... 2064 - UE018. Cut filled by stratigraphic unit UE009, of irregular form in plan, with the walls inclined towards the interior with a fairly vertical drop (110º). The base is flat with some irregu... 2065 - UE019. Court filled by the stratigraphic unit UE010, with irregular shape in plant. The walls are inclined towards the base of the cut at an angle of 120º. The base is flat, irregular and w... 2066 - UE020. Cut of circular shape in plan, 10 cm in diameter and 17 cm in depth. The walls fall almost straight from the mouth to the base which is also circular, slightly convex, and 7 cm in dia... 2067 - UE021. Cut with a slightly oval shape in plan, 42 x 39 cm (NW-SE; NE-SW) and a maximum depth of 38 cm. The walls of the western half fall straight from the mouth, while those of the E have a... 2068 - UE022. Cut of circular shape in plan, 13 cm in diameter and 6 cm in depth. The walls fall inwards at an angle slightly above 90º. The base is circular, 11 cm in diameter, and slightly conve... 2069 - UE023. Cut with a circular shape in plan, 15 cm in diameter and 23 cm in depth. The walls fall inwards at an angle of +-115º, continuously until they reach the base. The base is circular an... 2070 - UE024. Cut with an oval shape in plan, wider at the N end than at the S. It has dimensions of 107 x 72 cm (N-S; E-W), and an average thickness of 4 cm; however, it has two small holes in the... 2071 - T2-088-I07. Adult individual placed in extended ventral decubitus (south-north direction). Only part of the lower limbs have been preserved in the primary position. 2072 - T2-088-I06. Adult individual, placed with the ulna prone (east-west) in a densely filled space. 2073 - T2-088-I08. Adult individual placed in extended ventral decubitus (northeast-southeast). 2074 - T2-088-I05. Adult individual lying in prone position under individual I9. 2075 - T2-088-I09. Adult individual lying prone on individual I5. 2076 - UE025. Cut of circular shape in plan, 26 cm in diameter with a depth of 13 cm. The walls fall straight from the mouth to the base. This is irregular, tending towards oval, 17 x 13 cm (N-S; E... 2077 - T2-100-I10. Adult individual of indeterminate sex. 2078 - UE026. Cut with a circular shape at the mouth, 22 cm in diameter and a depth of 21. The walls present a certain symmetry, falling straight towards the base. The base is almost flat, with a "... 2081 - T2-106-I11. Individual placed in prone decubitus (south-east/northeast). The skeleton was found to have close anatomical connections which indicates that it was buried in densely filled spa... 2083 - T2-106-I12. Adult individual placed in extended prone position. Close joint connections which confirm the decomposition of the body in a densely filled space. 2084 - UE030. Fill of dark brown soil, of high compaction but less than stratigraphic unit UE007. It has a fine granulometric composition made up of clayey, sandy, and organic materials. It appear... 2085 - UE031. Fill of black earth below stratigraphic unit UE005, with some charcoal in its composition. It has a sandy granulometry, with a power of less than 4 cm. In plan it has an oval shape, ... 2086 - T2-106-I13. Adult individual in extended prone position. 2087 - UE032. Fill of brown soil with little compaction (the soil is very loose). In its granulometry, sands predominate over argillaceous materials. Its shape in plan is oval, with a narrowing in ... 2088 - UE033. Cut with irregular form in plant, kidney-shaped. Its walls on the E slope inwards at an angle of less than 60º, while on the N side they do so almost vertically. Their dimensions are... 2093 - UE039. Carbonized wood structure surrounded by greyish earth. When excavating it no complete section of the wood could be recovered, only fragments. It has an oval shape in plan, 9 x 7 cm in... 2094 - UE040. Cut that inserts into the NW profile of OP1, with a semi-oval shape in plan. It has visible dimensions of 44 x 29 cm (N-S;E-W) and a maximum depth of 29 cm. The western wall has an i... 2095 - UE041. Partial cut that continues in the NW profile of OP1. Its shape is oval, with the walls straight or slightly inclined towards the interior in the south zone (>90º). The dimensions of... 2096 - UE042. Cut with circular shape in plan and irregular walls. It has a mouth of 7 cm. in diameter and reaches a depth of 13 cm. Overall it has a moderate N-S inclination. It contains stratigra... 2097 - UE043. Partially excavated cut, continuing in the NE profile of the operation. It is semicircular in shape, 17 cm in diameter, with walls that fall at a right angle towards the base, which i... 2098 - UE044. Cut oval in shape (joined to the SW hole of stratigraphic unit UE 018), with a central area that narrows. Its dimensions are 56 x 16 cm (NW-SE; NE-SW). In the central zone it reaches ... 2099 - UE045. Cut of oval shape in plan, 10 x 7 cm (N-S; E-W), with a maximum depth of 6 cm. The walls are symmetrical and burnt due to the fragment of wood that filled it. The base is circular and... 2100 - UE046. Fill of brown-black earth, of high compaction and argillaceous granulometric composition. In plan its form is oval, 33 x 29 cm (N-S; E-W) and has a maximum thickness of 12 cm. It does... 2101 - UE047. Fill of dark brown earth, quite organic and of medium-low compaction. It has an almost circular shape in plan, 21 x 23 cm (N-S; E-W) and a maximum thickness of 23 cm. In its compositi... 2102 - UE048. Cut of circular form in plan, 22 cm in diameter and 23 cm in depth. The E-W walls have a certain symmetry. The base is irregular, very concave, 15 x 6 cm (E-W; N-S). In the northern h... 2103 - UE049. Deposit of very compact clay of reddish color. The shape in plan is irregular, 28 x 20 cm (NW-SE; NE-SW) and a maximum thickness of 5 cm. The surrounding soil has a reddish coloration... 2104 - UE050. Carbonized mangrove wood. It was most likely part of a wooden structure, cover or ranch. A sample was taken for C14 analysis which yielded a calibrated date of Cal AD 680 to 830 (Cal ... 2105 - UE051. Fill of dark brown earth with patches of blacker earth of small dimensions to the S and to the W. It has a medium compaction and in its composition there are abundant sands and remain... 2106 - UE052. Irregular cut in an inverted "C" shape. Its dimensions are variable: to the S it measures 24 cm in width and 8cm in depth; to the E, 17 and 12; and to the N, 12cm in width and 12cm in... 2107 - UE053. Cut, oval in plan, 32 x 29 cm (N-S; E-W) and 13 cm deep. The walls fall vertically towards the base, at an angle of +- 90º. The mouth-wall and wall-base ruptures are abrupt; the bas... 2108 - UE054. Fill of brown earth, not very compacted. It is almost circular in plan although it is partially inserted in the NW profile of OP1. Its dimensions are 35 x 32 cm (N-S;E-W) and it has a... 2109 - UE055. Cut almost circular in shape in plan despite being slightly inserted into OP1´s NW profile. It has dimensions of 34 x 32 cm (N-S;E-W) and a depth of 32 cm. The walls fall vertically ... 2110 - UE056. Deposit of small sized pieces of charcoal mixed with brown earth. The shape in plan is circular, 13 cm in diameter, and has a maximum thickness of 4 cm. The compaction is high, simila... 2111 - UE057. Cut of circular shape in plan, 14 cm in diameter with a maximum depth of 4 cm. The walls fall at an angle of +- 100º towards the base, also circular (11 cm) and concave, somewhat dee... 2112 - UE058. Fill of very argillaceous earth that is grayish-greenish color, and of high compaction. The shape in plan is irregular, 70 x 37 cm (E-W; N-S). The granulometric composition is fine, b... 2113 - UE059. Deposit of dark brown earth, not very compacted and very organic, with abundant roots of small dimensions and, in smaller quantity, larger roots that cross the deposit from north to s... 2114 - UE060. Fill of brown earth not very compacted and very organic with abundant small roots. The shape in plan is oval of 20 x 14 cm (NE-SW;NW-SE) with a maximum thickness of 33 cm. Ceramic mat... 2115 - UE061. Fill of brown earth, not very compacted and very organic, sandy with small roots throughout its extent. The shape in plan is oval, of 22 x 13 cm (N-S; E-W) and a maximum thickness of ... 2116 - UE062. Cut of irregular form and elongated in plan, of 75 x 25 cm (NW-SE; NE-SW) and a maximum depth of 37 cm. The walls fall vertically from the mouth towards the base around its entire con... 2117 - UE063. Cut with oval shape in plan, 18 x 15 cm (N-S; E-W) and a maximum depth of 29 cm. The walls descend in an angle of 100º in the south, while in the rest of the cut they do so inferior ... 2118 - UE064. Cut with a "triangular " shape in plan, with non-straight sides and rounded corners, 22 x 13 cm (N-S; E-W) and a maximum depth of 8 cm. The E wall descends at an angle of about 140°,... 2119 - UE065. Fill of brown soil, of medium-low compaction and sandy granulometry with abundant remains of organic matter (small roots and coals). Its shape in plan is oval, although irregular, of ... 2120 - UE066. Cut of semicircular form in plan, with dimensions of 60 x 35 cm (SW-NE; SE-NW) and a maximum depth of 15cm. The walls fall towards the base at an angle of more than 130º all around ... 2121 - UE067. Fill of orange-brown earth, sandy, with organic remains (roots) and an abundant number of clay remains in the form of small and medium sized clumps. Its compaction is medium, as well ... 2122 - UE068. Fill of very organic black earth with numerous remains of small roots. Its compaction is very low. It has an oval shape in plan that measures 45 x 36 cm (NW-SE; NE-SW) and a maximum ... 2123 - UE069. Cut of oval shape in plan, although irregular and without orientation, with dimensions of 38 x 47 cm (NW-SE; NE-SW). The walls fall almost vertically from the edge to a depth of 45 cm... 2125 - UE071. Package of human bones. Neither the pit nor the fill (egg white effect) could be defined. Probably associated with tomb T4. It was located by means of a borehole. 2138 - EU087. Deposit composed of two osaments, garments and offerings located 1.50 m - 1.20 m from the surface, inside the grave of tomb T2. It occupies a rectangular floor space of 2.50 m x 1 m. ... 2145 - EU098. Clay deposit located at a depth of 2.92 m. It is brown in colour and has a large quantity of sand, small fragments of artifacts, especially ceramics and small coals. It is circular in... 2146 - EU101. Deposit of clayey soil located at a depth of 3.15 m. It is a compact, brown filling with green tones. At the dive this deposit feels less hard than the deposit UE098. There is a large... 2147 - EU102. Depot located inside tomb T1 at a depth of 4.12 meters. The matrix is brown and the granulometry is medium. It has a power of 6 cm and contains a large number of fragments of ceramic ... 2148 - EU103. Artifact repository located at a depth of 2.80 m (upper elevation) and 3.15 m (lower elevation). The soil matrix is brown, clayey, and contains small coals. It has a dip of approxima... 2149 - EU104. At a depth of 3.15 m. It rests on the first step of the pit and is attached, in part (NE, NW and SW edges), to the walls of the pit (a section of the same that joins the first step wi... 2150 - EU107. Deposit consisting of a large ceramic pot. It was placed on the UE138 unit (collapse of the lid of the funerary chamber of the lower vessel of tomb T2). An important quantity of cha... 2151 - EU108. Deposit of clayey earth, brown in colour, with some sands and medium compaction. Contains some fragments of human bones and abundant cultural material - ceramic fragments, shell beads... 2169 - EU128. Deposit of materials located on the wooden lid of the funerary chamber located in the lower vessel of tomb T2 at its SW edge. It has an inclination of 30º with SW-NE orientation, pro... 2174 - EU135 Materials depot located in the NE corner of tomb T2, above the bottom of the grave. The matrix contains clays and fine sands and is brown in colour. Some materials point in the directi... 2175 - EU136. Ceramic and stone artifacts repository, located above the bodies of the main burial of tomb T2, unit UE134. The pottery is fragmented, but retains its original geometry. This unit cov... 2176 - EU137. Earth deposit. It is brown, clay-coloured, of medium compaction, with abundant fragments of cultural materials. Its surface is horizontal. It covers the entire EU136 unit and on whi... 2177 - EU139. Deposit of materials, mostly ceramics. These are fragmented and only partially retain their geometry. They are not complete. It was found in the S corner of the grave of tomb T2. The ... 2178 - UE157. Fill of dark brown earth, of medium compaction and fine granulometry, in which silts and clays predominate over other elements. There are no roots or stones. Dimensions 41 x 18 cm (N-... 2179 - UE158. Fill of grayish earth, ashy, of average compaction and fine granulometry (abundant silt); neither roots nor stones can be observed, but there is an abundance of charcoal. It occupies ... 2180 - EU159. Ceramic deposit that extends over the burial in its sector W-N and in the corner E. It has dimensions of 2.66 x 1.84m (SW-NE and SE-NW) and an average power of 25 cm. The matrix is gr... 2181 - UE168. Fill of very dark gray soil, wet as a result of the water table, low compaction, mineral and organic and of fine granulometry. On the ground plan, it appears in the E corner of T1 and... 2182 - UE237. Grayish deposit, with medium compaction, of fairly organic soil located to the E of T1, in the expanded area. It has only been defined in plan. It is possible that it is a fill of T1... 2183 - UE170. Patch of earth that is circular in plan, grayish in the center and light brown on the outer perimeter. The central grayish zone is more organic and finer grain than the brown, which i... 2184 - UE193. Cut of slightly oval shape in plan, of 19 x 16 cm (axis NE-SW x NW-SE) and 8 cm in depth, giving it a light NE-SW orientation. The walls fall inwards at an angle of about 90º. The ba... 2185 - UE171. Patch of earth of slightly oval shape in plan, with a slight NE-SW orientation, grayish in the center and light brown on the outer perimeter. The central greyish zone is more organic ... 2186 - UE194. Cut of circular shape in plan, approximately 20 cm in diameter and 11 cm in depth. The walls fall inwards at an angle of about 135º until they reach the base. This is slightly oval, ... 2187 - UE172. Fill of earth of almost circular shape in plan. It is grayish in color with light brown zones, but not as homogeneous in its composition as the deposits of the other posts. The sedime... 2188 - UE184. Cut of circular shape in plan, approximately 17 cm in diameter and 12 cm in depth. The walls fall inwards at an angle of about 100º until they reach the base. The base is circular, 4... 2189 - UE173. Fill of earth of oval shape in plan, with the central part being grayish in color and the exterior light brown. The sediment of the gray areas is more organic and finer grain than tha... 2190 - UE185. Cut of oval shape in plan, approximately 20 x 16 cm (NW-SE x NE-SW), and 14 cm deep. The walls fall inwards at an angle of about 100º until they reach the base. This is oval, 8 x 6 c... 2191 - UE174. Fill of semicircular shape in plan, that follows the wall of the profile. It is made up of a mixture of grayish sediments with light brown areas. The sediments in the gray areas are m... 2192 - UE186. Cut of semicircular shape in plan that seems to insert under the E profile of T1. The visible surface protrudes 14 cm from the profile and is 8 cm deep. The walls fall inwards at an a... 2193 - UE175. Fill of earth of almost circular shape in plan, of grayish color in the center and light brown around its perimeter. The sediment of the gray areas is more organic and finer grain tha... 2194 - UE187. Cut of circular shape in plan, approximately 14 cm in diameter and 10 cm in depth. The walls fall inwards at an angle of about 100º until they reach the base. This is circular, 4 cm ... 2195 - UE176. Fill of earth of circular form in plan, mainly brown in color with a grayish center. The central grayish zone is more organic and finer grain than the brown, which is more mineral. It... 2196 - UE188. Cut of circular shape in plan, approximately 15 cm in diameter and 10 cm in depth. At the S end, the walls fall inwards at an angle of about 100º until they reach the base; at the N ... 2197 - UE177. Fill of earth of circular shape in plan, with a mixed brown and gray color. The central grayish zone is more organic and finer grain than the brown, which is more mineral. It was docu... 2198 - UE189. Cut of oval shape in plan, approximately 14 x 12 cm (NE-SW x NW-SE) and 10 in depth. The walls fall inwards at an angle of about 135º until they reach the base, oval, 6 x 3 cm (NW-SE... 2199 - UE178. Fill of earth with an almost circular shape in plan, grayish in the center and light brown on its perimeter. The sediment of the gray areas is more organic and finer grain than that o... 2200 - UE190. Cut of circular shape in plan, approximately 12 cm in diameter and a maximum depth of 14 cm. The walls fall inwards at an angle slightly greater than 90º until they reach the bottom.... 2201 - UE179. Fill of circular shape in plan composed of a mixture of light brown and gray sediments. Those of the gray areas are more organic and finer grain than those of the brown areas, which a... 2202 - UE191. Cut of circular shape in plan, approximately 12 cm in diameter and a maximum depth of 10 cm. The walls fall inwards at an angle slightly greater than 90º until they reach the bottom.... 2203 - UE180. Fill of circular shape in plan composed of a mixture of light brown and gray sediments. Those of the gray areas are more organic and finer grain than those of the brown areas, which a... 2204 - UE192. Cut of oval shape in plan, approximately 17 x 15 cm (NW-SW x NW-SE) and 10 in depth. The walls fall inwards at an angle of about 135º until they reach the base which is circular, 8 c... 2205 - EU161. Deposit of artefacts. The matrix is a dark grey soil, organic and with roots, fine granulometry and high compaction. It was located in the S corner of the lower vessel of tomb T2. It ... 2207 - EU182. Package of human bones located above burial UE134, in tomb T2, in quadrant NE above thorax area of individuals I6, I5, I4 and I2. They appeared following the longitudinal axis of the ... 2208 - UE183. Package of human bones and fauna (mammals), located above the UE134 burial, in tomb T2, in quadrant SW on the lower limbs of individuals I14, I5, I18 and I19. Their orientation is not... 2209 - UE218. Circular patch of organic grayish earth with remains of ashes. Medium compaction and fine grain, with remnants of charcoal. On this level, an incense burner was documented lying face... 2210 - UE235. Cut of circular shape in plan, approximately 22 cm in diameter with a maximum depth of 7 cm. The break at the mouth of the hole is abrupt, while at the base it is more gradual. This i... 2212 - UE202. Fill of earth with a circular shape in plan, gray in the center and brown on the perimeter. The central grayish zone is more organic and finer grain than the brown, which is more min... 2213 - UE219. Cut with an almost circular shape in plan, 18 cm in diameter (partially destroyed by the excavation of tomb T1), and 13 cm in depth. The walls fall inwards at an angle of about 100. T... 2214 - UE203. Fill of earth of almost circular morphology in plan, gray in the center and brown on the perimeter. The matrix is more organic than mineral and appears in the SW quadrant of tomb T2. ... 2215 - UE220. Cut of semicircular shape in plan that seems to continue towards the SE profile of tomb T2. The visible surface protrudes 15 cm from the profile and is 16 cm deep. The walls fall inwa... 2216 - UE204. Fill of earth with an almost circular morphology in the plan, gray in the center and brown on the perimeter, the matrix is more organic than mineral. It appears in the SW quadrant o... 2217 - UE221. Cut of semicircular shape in plan that seems to continue towards the SE of tomb T2. The visible surface protrudes 22 cm from the profile and is 18 cm deep. The walls fall inwards at a... 2218 - UE205. Fill of earth with an almost circular morphology in plan, gray in the center and brown around the perimeter, the matrix is more organic than mineral. It appears in the SE quadrant of... 2219 - UE222. Cut of semicircular shape in plan that seems to continue towards the SW of tomb T2. The visible surface protrudes 18 x 8 cm (E-W x N-S) from the profile and is 7 cm deep. The walls fa... 2220 - UE206. Fill of earth with an almost circular morphology in plan, gray in the center and brown around the perimeter, the matrix is more organic than mineral. It appears in the quadrant W of ... 2221 - UE223. Cut of semicircular shape in plan that seems to continue towards the S-SW of tomb T2. The visible surface protrudes 18 x 8 cm (E-W x N-S) from the profile and is 7 cm deep. The walls ... 2222 - UE207. Fill of circular shape in plan, composed of a mixture of light brown and gray sediments. The grayish zones are more organic and finer grain than the brown zones, which are more minera... 2223 - UE224. Cut with a circular shape in plan, approximately 15 cm in diameter with a maximum depth of 17 cm. The walls fall inwards at an angle slightly greater than 90º until they reach the b... 2224 - UE208. Fill with an oval shape in plan, grayish color. Matrix more organic than mineral, medium compaction and fine granulometry. Located in the W quadrant of tomb T2, its dimensions are 16... 2225 - UE225. Cut of circular shape in plan, approximately 15 cm in diameter with a maximum depth of 10 cm. The walls fall inwards at an angle of about 90º until they reach the bottom. The base is... 2226 - UE209. Fill with a slightly oval shape in a plan, composed of a mixture of light brown and gray sediments. The grayish zones are more organic and finer grain than the brown areas, which are ... 2227 - UE226. Cut of almost circular shape in plan, about 15 x 12 cm (SW-NE x SE-NW) and a maximum depth of 11 cm. The walls fall inwards at an angle slightly greater than 90º until they reach the... 2228 - UE210. Fill of circular shape in plan, composed of a mixture of light brown and grey sediments. The grayish zones are more organic and finer grain than the brown zones, which are more minera... 2229 - UE227. Cut of circular shape in plan, approximately 17 cm in diameter and a maximum depth of 5 cm. The walls fall inwards at an angle greater than 120º until they reach the bottom. The base... 2230 - UE211. Fill of circular shape in plan, composed of a mixture of light brown and gray sediments. The grayish zones are more organic and finer grain than the brown zones, which are more minera... 2231 - UE228. Cut of circular form in plan, approximately 15 cm in diameter and a maximum depth of 11 cm. The walls fall inwards at an angle slightly greater than 90º until they reach the bottom. ... 2232 - UE212. Fill of earth with a semicircular morphology on the ground, gray in the center and brown on the perimeter. The matrix is more organic than mineral and appears in the N corner of tomb ... 2233 - UE229. Cut of semicircular shape in plan that continues towards the NE of tomb T2. The visible surface protrudes 17 cm from the profile and is 4 cm deep. No orientation can be seen. It was ... 2234 - UE213. Fill of earth with an almost circular morphology in plan, gray in the center and brown on the perimeter. The matrix is more organic than mineral and appears in the SW quadrant of tomb... 2235 - UE230. Cut of semicircular shape in plan that partially continues towards the NE of tomb T2. The visible surface protrudes about 27 cm from the profile and is 18 cm deep. The walls fall inwa... 2236 - UE214. Fill of circular shape in plan composed of a mixture of light brown and gray sediments. The grayish zones are more organic and finer grain than the brown zones, which are more mineral... 2237 - UE231. Cut of circular shape in plan, approximately 13 cm of diameter and a maximum depth of 13 cm. The walls fall inwards at an angle of about 100º until they reach the bottom. The base, a... 2239 - UE215. Fill of circular shape in plan composed of a mixture of light brown and gray sediments. The grayish zones are more organic and finer grain than the brown zones, which are more mineral... 2240 - UE232. Cut of circular shape in plant, approximately 20 cm in diameter and a maximum depth of 13 cm. The walls fall inwards at an angle of about 100º until they reach the bottom. The base, ... 2241 - UE216. Fill of circular shape in plan composed of a mixture of brown and gray sediments. The grayish zones are more organic and finer grain than the brown areas, which are more mineral and s... 2242 - UE233. Cut of circular shape in plan, approximately 20 cm in diameter and a maximum depth of 13 cm. The walls fall inwards at an angle of about 100º until they reach the bottom. The base, o... 2243 - UE217. Fill of circular shape in plan composed of a mixture of light brown and gray sediments. The grayish zones are more organic and finer grain than the brown zones, which are more mineral... 2244 - UE234. Cut of circular shape in plan, approximately 20 cm in diameter and a maximum depth of 18 cm. The walls fall inwards at an angle of about 100º until they reach the bottom. The base, ... 2246 - UE166. Deposit of dark gray earth, organic and of medium compaction, similar in its characteristic to UE167. Its dimensions are 1.12 x 0.51 meters (SW-NE x SE-NW) and has a maximum thickness... 2247 - UE167. Fill of dark gray earth, organic and of medium compaction, which appears in tomb T6 in its northern half. Its dimensions are 0.82 x 0.66 meters (SW-NE x SE-NW) and its thickness is a... 2248 - EU165. Fossa cut. It is only partially preserved because it was cut to the NE by the fossa of tomb T1. Originally it probably had a quadrangular shape on the ground plan. We do not have enou... 2250 - UE196. Fill of dark brown earth with semicircular morphology, high compaction and medium grain. It is located in the S zone of the excavation, close to the S profile of tomb T1, and seems to... 2256 - UE199. Ceramic deposit located in the NW corner of tomb T2. It has not been excavated; only a small piece has been discovered during the excavation process of T2. A circle section morphology... 2257 - UE197. Fill of brown earth, relatively organic, of medium compaction that is located at the E boundary of the excavation.
This is possibly the upper fill of a tomb. 2261 - UE151. Deposit of brown earth (darker than UE150), more mineral than organic and fine grained (clayey); pieces of burnt wood and numerous ceramic remains can also be seen. It is located at ... 2262 - UE152. Fill of dark gray earth (going towards black); it is mineral (clayey) but with presence of organic matter. Fine granulometry and presence of small pieces of charcoal. It is located ... 2263 - UE153. Structure composed of several basalt boulders within unit UE150, arranged in a way that has yet to be defined; they are at a similar depth, and are rounded with no edges. To date 4 st... 2264 - UE154. Fill of grayish earth that appears in the W corner of the intervention. It is sandy, mineral and of medium granulometry. It has an irregular, slightly oval morphology and a NW-SE orie... 2265 - UE155. Small deposit of dark gray earth that appears in the corner W of the intervention. It is a mineral and organic mixture, of medium granulometry. It has an oval shape, somewhat irregula... 2266 - UE156. Small deposit of dark gray earth similar to UE155 that appears on the W corner of the intervention. It is a mineral and organic mixture, of medium granulometry. It has an oval shape ... 2267 - UE250. Burial pit of tomb T1. Contains units UE157, UE158, UE159, and UE160. It is cut by units UE184, UE185, UE186, UE187, UE188, UE189, UE190, UE191, UE192, UE193, and UE194. 2271 - UE240. Post hole fill to the E of tomb T1 (not excavated in 2013, partially preserved in profile). Fills unit UE241. 2272 - UE241. Post hole to the E of tomb T1. Contains unit UE240. Cuts unit UE181 and the natural level. 2277 - UE249. T2 grave fossa. Rectangular shape cut in a 5.73 m long by 3.16 m wide plan. Its upper perimeter was located at 1.54 m and the lower at 4 m. It has four walls: NE, NW, SW and SE. In ve... 2279 - UE253. Ceramic deposit close to the E boundary of the excavation. Possible tomb 2280 - UE254. Accumulation of ceramic fragments in brown sediment. Found on top of unit UE265. It is comparable to units UE255 and UE262. 2281 - UE255. Accumulation of fragmented ceramics in brown sediment. Found on top of unit UE265. This unit is comparable to units UE254 and UE262. 2282 - UE256. Deposit of brown earth with clay intrusions. Found on top of unit UE257. 2283 - UE257. Ceramic deposit of the level of the closing offering of tomb T7. It was found in the centre of the pit of this tomb, below unit UE256 and above units UE264 and UE265.
This is the... 2284 - UE258. Deposit of brown earth with intrusions. Found on top of unit UE252. This unit is comparable to unit UE265. 2285 - UE259. Fill of dark brown earth to the E of tomb T1. This unit was found under units UE195, UE196, UE197 and UE198. All of these units were registered in the 2013 excavation campaign. 2288 - UE262. Level of fragmented material found below unit UE251. 2290 - UE264. Deposit of dark brown earth below UE257. 2291 - UE266. Fill of post hole. It was found inside unit UE267. 2292 - UE267. Post hole. Cuts unit UE265. It is filled by unit UE266. 2293 - UE268. Fill of post hole. It was found inside unit UE269. 2294 - UE269. Post hole. Cuts unit UE265. It is filled by unit UE268. 2295 - UE271. Fill of post hole. It was found inside unit UE272. 2296 - UE272. Post hole. Cuts UE265. It is filled by unit UE271. 2297 - UE273. Fill of post hole. It was found inside unit UE274. 2298 - UE274. Post hole. It cut units UE265 and UE270. It was filled by unit UE273. 2299 - UE275. Fill of post hole. It was found inside unit UE276. 2300 - UE276. Post hole. It cut units UE265 and UE270. It was filled by unit UE275. 2301 - UE252A, 252B, 252C. Offering placed on a platform of vegetation, which served as a cover for tomb T7, once the collective burial UE300 had been carried out. It was partly supported by the m... 2305 - UE265. Colmation fill resulting from abandonment of the upper part of tomb T7; it predates offering 257 and formed after fill 270. It was made up of compact, plastic and very unctuous clayey... 2306 - UE270. Colmatation fill caused by the abandonment of the upper part of tomb T7, after fill 265. It caused the subsidence of offering 252a due to the overloading of the platform on which it ... 2307 - UE277. Primary pit of tomb T7. In terms of its morphology and orientation, it conforms to a large extent to the burial pattern characteristic of the El Caño cemetery. This is a rectangular-... 2308 - UE278. Geological substratum. Alluvium from the lower terrace of the Río Grande. It is visible in large areas of the excavated area because it was originally cut by the northeastern, sout... 2310 - UE283. Dark gray clay colmation fill formed as a result of the abandonment of the lower part of pit 277. It serves as support for the collapse of offering 252c. It has its origin in the filt... 2311 - UE284. Reddish clayey fill of the interior of tomb T8. Both tomb T8 and its fill UE284 are cut; in the southeastern sector by the northwestern wall of T7, and in the northwestern sector by t... 2312 - UE285-UE286. Post impression on the NE flank of tomb T7. To the N of UE316 and to the S of UE287. Associated with post hole UE376. It consists of a stain in the shape of a circular corona, ... 2313 - UE287-UE288. Post impression on the NE flank of tomb T7. To the N of UE285 and to the S of UE289. Associated with post hole UE374. It consists of a stain in the shape of a circular corona, m... 2314 - UE289-UE290. Post impression on the NE flank of tomb T7. To the N of UE287. Associated with post hole UE372. It consists of a stain in the shape of a circular corona, more or less centred o... 2315 - UE291-UE292. Post impression on the SW flank of tomb T7. N of UE293. Associated with post hole UE354. It consists of a stain in the shape of a circular corona, more or less centred on the ... 2316 - UE293-UE294. Post impression on the SW flank of tomb T7. To the N of UE295 and to the S of UE291. Associated with post hole UE352. It consists of a stain in the shape of a circular corona... 2317 - UE295-UE296. Post impression on the SW flank of tomb T7. To the N of UE297 and to the S of UE293. Associated with post hole UE350. It consists of a stain in the shape of a circular corona... 2318 - UE297-UE298. Post impression on the SW flank of tomb T7. To the N of UE314 and to the S of UE295. Associated with post hole UE348. It consists of a stain in the shape of a circular corona, m... 2319 - UE299. Yellowish clayey fill resulting from the erosion of the NW, SW and NE walls of the lower part of pit UE277 of tomb T7. It was deposited on the surface of stratum 324 and on the crest... 2320 - UE300. Offering of artifacts placed over burial level UE301, in tomb T7. Composed mostly of ceramic vessels (UE 300). During the archaeological excavation no fill was identified which was ... 2321 - UE301. Burial level of tomb T7. It was created within pit UE325, on the surface of stratum UE326. It is a collective burial in a mass grave and a filled space, made up of a total of 42 indi... 2322 - UE302. Impression of wooden brace used to reinforce the eastern end of the NE wall of the lower part of pit UE277, in tomb T7, occurred after the detachment of UE329. To the N of imprint U... 2323 - UE303. Fill of the interior of imprint UE302, inside tomb T7. Equivalent to UE283. It was individualised for methodological precaution, and therefore received its own UE number and was excav... 2324 - UE304. Impression of wooden brace used to reinforce the eastern end of the NE wall of the lower part of pit UE277, in tomb T7, occurred after the detachment of UE329. To the S of imprint U... 2325 - UE305. Fill of the interior of imprint UE304, inside tomb T7. Equivalent to UE283. It was individualised for methodological precaution, and therefore received its own UE number and was excav... 2326 - UE306. Impression of wooden brace used to reinforce the eastern end of the NE wall of the lower part of pit UE277, in tomb T7, occurred after the detachment of UE329. To the S of imprint U... 2327 - UE307. Fill of the interior of imprint UE306, inside tomb T7. Equivalent to UE283. It was individualised for methodological precaution, and therefore received its own UE number and was excav... 2328 - UE308-UE309. Post impression on the NW flank of tomb T7. To the E of UE312. Associated with post hole UE362. It consists of a stain in the shape of a circular corona, more or less centred ... 2329 - UE310-UE311. Post impression on the NW flank of tomb T7. To the E of UE318 and to the W of UE312. Associated with post hole UE358. It consists of a stain in the shape of a circular corona,... 2330 - UE312-UE313. Post impression on the NW flank of tomb T7. To the E of UE310 and to the W of UE308. Associated with post hole UE360. It consists of a stain in the shape of a circular corona,... 2331 - UE314-UE315. Post impression on the SW flank of tomb T7. To the S of UE297. Associated with post hole UE346. It consists of a stain in the shape of a circular corona, more or less centred... 2332 - UE316-UE317. Post impression on the NE flank of tomb T7. To the S of UE285. Associated with post hole UE378. It consists of a stain in the shape of a circular corona, more or less centred o... 2333 - UE318-319. Post impression on the NW flank of tomb T7. To the W of UE310. Associated with post hole UE356. It consists of a stain in the shape of a circular corona, more or less centred on... 2334 - UE320. Post hole located next to the W corner of pit 277, of tomb T7, to the N of UE322. This is one of the 27 post holes made at the bottom of pit UE277 at the time of the initial construct... 2335 - UE321. Fill of earth inside the hole of post UE320, in tomb T7. Equivalent to stratum UE328, with respect to which it is identical in color, composition and texture. It also lacks the charac... 2336 - UE322. Post hole located next to the W corner of pit 277, of tomb T7, to the S of UE320. This is one of the 27 post holes made at the bottom of pit UE277 at the time of the initial construct... 2337 - UE323. Fill of earth inside the hole of post UE322, in tomb T7. Equivalent to stratum UE327, with respect to which it is identical in color, composition and texture. It also lacks the charac... 2338 - UE324. Colamation fill caused by the temporary abandonment of the lower part of pit UE277, in tomb T7. It served as a foundation for burial pit UE325. It is a massive deposit made up of dark... 2339 - UE325. Burial pit entirely excavated from fill UE324 which had formed inside tomb T7 during the temporary abandonment phase. Its identification was crucial for the correct interpretation of ... 2340 - UE326. Fill on the bottom of burial pit UE325, in tomb T7. It was composed of very dark grayish-brown earth with reddish and blackish shades, generated by the natural presence of iron oxides... 2341 - UE327. Colmatation sediment as a result of abandonment, located at the bottom of pit UE277, in tomb T7. It rested on the bed of the main pit (UE277). It was composed of yellowish clayey soil... 2342 - UE328. Partial collapse of the NW wall of pit UE277 onto its bed, together with numerous artefacts originating from the offering and grave goods of tomb T8. It is the oldest of the fills of... 2343 - UE329. Undermining of the eastern end of the NE wall of the lower part of pit UE277, in tomb T7, caused by the detachment of a block of geological substratum. It is an irregularly contoured ... 2344 - UE330. Post hole located next to the E corner of pit UE277, to the SE of UE378 and to the N of UE332, which never fulfilled its function. This is one of the 27 post holes made at the bottom... 2345 - UE331. Fill of earth of post hole UE330, in tomb T7. Equivalent to fill UE327, with respect to which it is identical in color, composition and texture. It also lacks the characteristic reddi... 2346 - UE332. Post hole located next to the E corner of pit UE277, to the SE of UE330 and to the NE of UE334, which never fulfilled its function. This is one of the 27 post holes made at the bottom... 2347 - UE333. Fill of earth of post hole UE332, in tomb T7. Equivalent to fill UE327, with respect to which it is identical in color, composition and texture. It also lacks the characteristic reddi... 2348 - UE334. Post hole located on the SE flank of pit UE277, SW of UE332 and NE of UE336, which never fulfilled its function. This is one of the 27 post holes made at the bottom of pit UE277 at th... 2349 - UE335. Fill of earth of post hole stratigraphic unit UE334. Equivalent to the fill of stratigraphic unit UE327, with respect to which it is identical in color, composition, and texture. It l... 2350 - UE336. Post hole located on the SE flank of the bottom of tomb T7 that never fulfilled its function. This is one of the 27 post holes made at the bottom of pit UE277 at the time of the init... 2351 - UE337. Fill of earth of post hole stratigraphic unit UE336. Equivalent to fill UE327, with respect to which it is identical in color, composition and texture. It also lacks the characteristi... 2352 - UE338. Post hole located on the SE flank of the pit stratigraphic unit UE277, to the SW stratigraphic unit UE336 and to the NE of stratigraphic unit UE340. It never fulfilled its function. ... 2353 - UE339. Fill of earth of post hole stratigraphic unit UE338. Equivalent to fill UE327, with respect to which it is identical in color, composition and texture. It also lacks the characteristi... 2354 - UE340. Post hole located on the SE flank of the pit stratigraphic unit UE277, to the SW of the stratigraphic unit UE338 and to the NE of stratigraphic unit UE342. It never fulfilled its func... 2355 - UE341. Fill of earth of post hole UE340. Equivalent to fill UE327, with respect to which it is identical in color, composition and texture. It also lacks the characteristic reddish stain in ... 2356 - UE342. Post hole located on the SE flank of pit UE277, SW of UE340 and NE of UE344, that never fulfilled its function. This is one of the 27 post holes made at the bottom of pit UE277 at the... 2357 - UE343. Fill of earth of post hole UE342. Equivalent to fill UE327, with respect to which it is identical in color, composition and texture. It also lacks the characteristic reddish stain in ... 2358 - Post hole located next to the S corner of pit UE277, to the SW of UE342 and to the SE of UE346, that never fulfilled its function. This is one of the 27 post holes made at the bottom of pit... 2359 - UE345. Fill of earth of post hole UE344. Equivalent to fill UE327, with respect to which it is identical in color, composition and texture. It also lacks the characteristic reddish stain in ... 2360 - UE346. Post hole located in the SW flank of pit UE277, to the NW of UE344 and to the SE of UE348. It was used to house post UE314/315. This is one of the 27 post holes made at the bottom of... 2361 - UE347. Fill of earth of post hole UE346. It differs clearly from the upper fill UE327, and possesses the characteristic reddish stain in the shape of a circular corona that has been interpre... 2362 - UE348. Post hole located on the SW flank of pit UE277, to the NW of UE346 and to the SE of UE350. It was used to house post UE297/298. This is one of the 27 post holes made at the bottom of... 2363 - UE349. Fill of earth of post hole UE348. It differs clearly from the upper fill UE327, and possesses the characteristic reddish stain in the shape of a circular corona that has been interpre... 2364 - UE350. Post hole located on the SW flank of pit UE277, to the NW of UE348 and to the SE of UE352. It was used to house post UE295/296. This is one of the 27 post holes made at the bottom of... 2365 - UE351. UE349. Fill of earth of post hole UE350. It differs clearly from the upper fill UE327, and possesses the characteristic reddish stain in the shape of a circular corona that has been i... 2366 - UE352. Post hole located on the SW flank of pit UE277, to the NW of UE350 and to the SE of UE354. It was used to house post UE293/294. This is one of the 27 post holes made at the bottom of... 2367 - UE353. Fill of earth of post hole UE352. It differs clearly from the upper fill UE327, and possesses the characteristic reddish stain in the shape of a circular corona that has been interpre... 2368 - UE354. Post hole located on the SW flank of pit UE277, to the NW of UE352 and to the SE of UE322. It was used to house post UE291/292. This is one of the 27 post holes made at the bottom of... 2369 - UE355. Fill of earth of post hole UE354. It differs clearly from the upper fill UE327, and possesses the characteristic reddish stain in the shape of a circular corona that has been interpre... 2370 - UE356. Post hole located on the NW flank of pit UE277, to the NE of UE320 and to the SW of UE358. It was used to house post UE318/319. This is one of the 27 post holes made at the bottom of... 2371 - UE357. Fill of earth of post hole UE356. It differs clearly from the upper fill UE327, and possesses the characteristic reddish stain in the shape of a circular corona that has been interpre... 2372 - UE358. Post hole located on the NW flank of pit UE277, to the NE of UE356 and to the SW of UE360. It was used to house post UE310/311. This is one of the 27 post holes made at the bottom of... 2373 - UE359. Fill of earth of post hole UE358. It differs clearly from the upper fill UE327, and possesses the characteristic reddish stain in the shape of a circular corona that has been interpre... 2374 - UE360. Post hole located on the NW flank of pit UE277, to the NE of UE358 and to the SW of UE362. It was used to house post UE312/313. This is one of the 27 post holes made at the bottom of ... 2375 - UE361. Fill of earth of post hole UE360. It differs clearly from the upper fill UE327, and possesses the characteristic reddish stain in the shape of a circular corona that has been interpre... 2376 - UE362. Post hole located on the NW flank of pit UE277, to the NE of UE360 and to the SW of UE364. It was used to house post UE308/309. This is one of the 27 post holes made at the bottom of... 2377 - UE363. Fill of earth of post hole UE362. It differs clearly from the upper fill UE327, and possesses the characteristic reddish stain in the shape of a circular corona that has been interpre... 2378 - UE364. Post hole located on the NW flank of pit 277 of tomb T7, to the NE of UE362 and to the NW of UE366. This is one of the 27 post holes made at the bottom of pit UE277 at the time of t... 2380 - UE365. Fill of earth of post hole UE364. Equivalent to fill UE328, with respect to which it is identical in color, composition and texture. It also lacks the characteristic reddish stain in ... 2381 - UE366. Post hole located next to the N corner of pit 277 of tomb T7, to the NE of UE364 and to the NW of UE368. This is one of the 27 post holes made at the bottom of pit UE277 at the time... 2382 - UE367. Fill of earth of the interior of post hole UE366, in tomb T7. Equivalent to strata UE328, with respect to which it is identical in color, composition and texture. It also lacks the ch... 2383 - UE368. Post hole located on the NE flank of pit 277 of tomb T7, to the SE of UE366 and to the NW of UE370. This is one of the 27 post holes made at the bottom of pit UE277 at the time of th... 2384 - UE369. Fill of earth of the interior of post hole UE368, in tomb T7. Equivalent to strata UE327, with respect to which it is identical in color, composition and texture. It also lacks the ch... 2385 - UE370. Post hole located on the NE flank of pit 277 of tomb T7, to the SE of UE368 and to the NW of UE372. This is one of the 27 post holes made at the time of the initial construction of to... 2386 - UE371. Fill of earth of the interior of post hole UE370, in tomb T7. Equivalent to strata UE327, with respect to which it is identical in color, composition and texture. It also lacks the ch... 2387 - UE372. Post hole located on the NE flank of pit UE277, to the SE of UE370 and to the NW of UE374. It was used to house post UE289/290. This is one of the 27 post holes made at the bottom of... 2388 - UE373. Fill of earth of post hole UE372. It differs clearly from the upper fill UE327, and possesses the characteristic reddish stain in the shape of a circular corona that has been interpre... 2389 - UE374. Post hole on the NE flank of pit, stratigraphic unit UE277. It is located to the SE of the stratigraphic unit UE372, and to the NW of the stratigraphic unit UE376. It was used to h... 2390 - UE375. Fill of earth of post hole UE374. It differs clearly from the upper fill UE327, and possesses the characteristic reddish stain in the shape of a circular corona that has been interpre... 2391 - UE376. Post hole located on the NE flank of pit (stratigraphic unit UE277), to the SE of stratigraphic unit UE374 and to the NW of stratigraphic unit UE378. It was used to house post strati... 2392 - UE377. Fill of earth of post hole UE376. It differs clearly from the upper fill UE327, and possesses the characteristic reddish stain in the shape of a circular corona that has been interpre... 2393 - UE378. Post hole located on the NE flank of stratigraphic unit UE277, to the SE of stratigraphic unit UE376 and to the NW of stratigraphic unit UE330. It was used to house post UE316/317. T... 2394 - UE379. Fill of earth of post hole UE378. It differs clearly from the upper fill UE327, and possesses the characteristic reddish stain in the shape of a circular corona that has been interpre... 2395 - Semi-spherical bowl with a ring base and an externally thickened rim. Red slip on the interior surface. 2480 - Gold bead. 2481 - Gold beads. 2482 - Gold beads (19). 2499 - Necklace of gold beads. It was probably made with wooden beads that have now disappeared. From it, only the gold covers used to line them are preserved (68 covers).
The beads represent... 2534 - Spherical jar with a raised neck and a laterally displaced rim. 2658 - Red bowl. 2670 - Twenty charcoal fragments from Rhizophora sp.
The woody species of the Rhizophora family have, as common anatomical characteristics, perforations and scalariform pits. Rhizophora spp. ... 2671 - Polychrome bowl. 2672 - Polychrome plate on a pedestal. 2673 - Polychrome plate with pedestal. 2674 - Bowl on a tripod. 2675 - Polychrome bowl. 2676 - Ten charcoal fragments from Rhizophora sp.
The woody species of the Rhizophora family have, as common anatomical characteristics, perforations and scalariform pits. Rhizophora spp. inc... 2677 - Five charcoal fragments from Rhizophora sp.
The woody species of the Rhizophora family have, as common anatomical characteristics, perforations and scalariform pits. Rhizophora spp. in... 2683 - Tomb T1 is a 27 m³ pit, which contains eight individuals, two of them of high status, an adult of undetermined sex and an infant.

They were all buried in extended dorsal decubitus... 2684 - Tomb T2 is a 70 m³ pit. It was excavated in a stepped manner in three levels and contains three groups of burials.

Five individuals were buried in the first level, three in the s... 2685 - Tomb T4 is a 60 m³ pit, and contains a burial of 36 individuals .

The individual buried with the largest number of artifacts, status markers, was placed with the body facing east, ... 2686 - Tomb T7 is a 60 m³ pit containing 43 individuals (the MNI of this tomb is currently under review) all buried in an extended ventral decubitus position: 19 males, 7 females, and 16 infants. ... 2687 - Five charcoal fragments from Monocotyledoneae, probably from the Arecaceae family. The vascular system of monocotyledons is characterized by structurally well ordered vascular bundles (Tomli... 2688 - Pectoral and cuffs of gold and copper. They are very deteriorated and were found next to a necklace of spherical resin beads wrapped in gold cases. 2689 - Gold and copper cuffs (2). They were found next to a pectoral (perhaps two pectorals, which cannot be confirmed because the artifact is very deteriorated), and a necklace of spherical resin ... 2690 - Gold and copper artifact. Fragmented. 2691 - Fragments of an object with a laminar appearance manufactured from gold and copper. It is very fragmented. 2692 - Collection of gold beads (one type, two sizes). 2693 - Tapered cuff with "zigzag" design. It is made of gold and copper, and was found inside another bracelet of the same shape and design. A fragmented ulna and radius were found inside. It is ve... 2694 - Tapered cuff with zigzag design. It is made from gold and copper, and was found inside a cuff of the same shape and design on one of the forearms of individual I7. Inside, fragments of the u... 2695 - The pit of tomb T8, UE450, has reached us incomplete due to the cuts produced in it by the opening of subsequent tombs (T4 and T7) and it is therefore impossible to know its original complet... 2696 - Tomb T5 was located 3.30-3.41 m from the surface, immediately east of tomb T2. This tomb was disturbed, so we do not know its original shape. In it was found the bones of an adult individual... 2697 - Tomb T6 was located below tomb T5 at a depth of 3.48-3.69 m. Of this unit, only an area of 2.48 x 2.30 m is preserved as it was cut by tomb T1 to the northwest and by T2 to the southeast. 2700 - Perforated shark tooth belonging to the grave goods of individual I04 of tomb T7. It was found beneath their skull. 2702 - Bone spindle whorl. 2707 - The Fabaceae family includes approximately 16,400 species - including trees, shrubs, herbs and lianas - and is divided into three large subfamilies: Caesalpinoideae, Mimosoideae and Papilono... 2709 - 20 charcoal fragments belonging to Rhizophora sp.

The woody species of the Rhizophora family have, as common anatomical characteristics, perforations and scalariform pits. Rhizophor... 2710 - 6 charcoal fragments belonging to Rhizophora sp.
Transversal plane. Indistinct growth rings. The wood has a diffuse porosity in the ring with the vessels isolated or in short radial ro... 2711 - 20 charcoal fragments belonging to Rhizophora sp.
Transversal plane. Indistinct growth rings. The wood has a diffuse porosity in the ring with the vessels isolated or in short radial r... 2712 - 20 charcoal fragments corresponding to cf. Manilkara sp.

This genus includes species that cannot be differentiated on the basis of their anatomical characteristics (Kukachka 1981),... 2713 - 20 charcoal fragments corresponding to cf. Manilkara sp.

This genus includes species that cannot be differentiated on the basis of their anatomical characteristics (Kukachka 1981),... 2739 - This digital object brings together the papers presented at the 56th ICA 2018 (International Congress of Americanists), Salamanca, 15-20 July 2018 .
Symposium coordinated by the team o... 2740 - Documents related to Mercedes Guinea´s presentation at the 56th ICA (International Congress of Americanists), Salamanca, 15-20 July 2018, entitled Scenes related to death and sacrifice ... 2741 - Materials and documents related to the presentation by Miguel A. Hervás at the 56th International Congress of Americanists, Salamanca, 15-20 July 2018, entitled: The funerary structures ... 2742 - Materials and documents related to Julia Mayo´s presentation at the 56th International Congress of Americanists, Salamanca, 15-20 July 2018, with the title: Ritual Violence in El Caño. ... 2743 - Materials and documents related to Carlos Mayo´s presentation at the 56th International Congress of Americanists, Salamanca, 15-20 July 2018, with the title: Chronology and styles of cer... 2744 - Materials and documents related to Jesús Herrerín´s presentation at the 56th International Congress of Americanists, Salamanca, 15-20 July 2018, with the title: Markers of metabolic stre... 2745 - Materials and documents related to Alexa Hancock´s presentation at the 56th International Congress of Americanists, Salamanca, 15-20 July 2018, with the title: A case study of an infa... 2746 - Materials and documents related to Joeri Kaal´s presentation at the 56th International Congress of Americanists, Salamanca, 15-20 July 2018, with the title: Resin objects in the grave go... 2747 - Materials and documents related to the presentation by María Martín-Seijo at the 56th International Congress of Americanists, Salamanca, 15-20 July 2018, with the title: Wood to accompa... 2748 - Materials and documents related to James Doyle´s presentation at the 56th International Congress of Americanists, Salamanca, 15-20 July 2018, with the title: The history of Panama among ... 2749 - Materials and documents related to Adam Berrey´s presentation at the 56th International Congress of Americanists, Salamanca, 15-20 July 2018, with the title: Demographic factors in the v... 2750 - Materials and documents related to Mikael Haller´s presentation at the 56th International Congress of Americanists, Salamanca, 15-20 July 2018, with the title: An evaluation of the macro... 2752 - Materials and documents related to the presentation by Alfredo F-Valmayor/Ana F-Pampillón at the 56th International Congress of Americanists, Salamanca, 15-20 July 2018, with the title: 2753 - Julia Mayo. XVII National Congress of Science and Technology (APANAC 2018). Asociación Panameña para el Avance de la Ciencia (Panamanian Association for the Advancement of Science). 23 to... 2754 - Congress of Education and Museums. Ciudad del Saber and the Network of Visitor Centers and Museums of the Interoceanic Region of Panama, presented the second edition of the Congres... 2755 - Figure carved in sperm whale tooth in the shape of a feline with crocodile features and parts of its body covered with embossed gold sheets. Conte style.
The animal´s body is adapted t... 2790 - UE001. First layer of excavation area OP1. Filled with very little cultural material, dark brown with lots of organic material and roots. It is in contact with UE005. No cultural remains hav... 2792 - PRE-COLUMBIAN USES OF FOREST RESOURCES IN FUNERARY CONTEXTS DATED FROM 750 TO 1020 cal AD: ARCHAEOBOTANICAL ANALYSIS FROM EL CAÑO (PANAMÁ)

Introduction. El Caño site (Coclé ... 2794 - LA TUMBA T7 DE LA NECRÓPOLIS DE “EL CAÑO”, TRADICIÓN ARQUEOLÓGICA GRAN COCLÉ, ISTMO DE PANAMÁ.

Summary: A multiple burial, the tomb T7 -cal d. C. 770-905 (cal AP 1180-... 2795 - The flying squid. The supernatural world of the Coclé
Introduction: The cocle, like so many other unwritten peoples, expressed the identities and qualities of the go... 2796 - NATURAL RESOURCES. Exploitation and exchange of natural resources for the manufacture of luxury goods. Nature and origin of the beads of the necklaces and other stone artifacts of green or g... 2797 - TATTOOS AND PAINTINGS. Corporal impressions in pre-Hispanic Panama: the anthropomorphic vessels of the necropolis of El Caño..

Introduction. The use of tattoos and body painti... 2798 - ESTANDARIZACIÓN EN LA CERÁMICA PREHISPÁNICA DE EL CAÑO, PANAMÁ: ESPECIALIZACIÓN, PRODUCTIVIDAD Y CONSUMO.

Summary: The pottery found in the tombs of El Caño shares the ... 2799 - EL DESCUBRIMIENTO DE UN CEMENTERIO DE ÉLITE EN EL CAÑO: INDICIOS DE UN PATRÓN FUNERARIO EN EL VALLE DE RÍO GRANDE, COCLÉ.

Overview: El Caño, located in the province of Coc... 2800 - LA ARMADURA DORADA DE UN CACIQUE COCLÉ: LOS PECTORALES DE ORO DEL AJUAR DEL INDIVIDUO PRINCIPAL DE LA TUMBA 2 DE LA NECRÓPOLIS DE EL CAÑO (900-1020 d. C.)

Summary: The recen... 2801 - EL CAÑO: LOS RITUALES FUNERARIOS DE LOS JEFES GUERREROS

Overview: This poster presents the result of an investigation aimed at identifying the ritual e... 2802 - EL CAÑO: SOCIAL ORDER IN THE NECROPOLIS OF “EL CAÑO”

Summary: This poster presents the results of an investigation into social order, the aim of which was to determine wheth... 2803 - MADERA CARBONIZADA EN CONTEXTOS FUNERARIOS DE LA JEFATURA DE RÍO GRANDE, PANAMÁ: ANTRACOLOGÍA EN EL SITIO DE EL CAÑO.(CHARRED WOOD IN FUNERARY CONTEXTS OF THE HEADQUARTERS OF RIO GRANDE,... 2804 - LA ESCULTURA PRECOLOMBINA DEL ÁREA INTERMEDIA. APROXIMACIÓN AL ESTUDIO ESTILÍSTICO, ICONOGRÁFICO Y ESPACIAL DEL GRUPO ESCULTÓRICO DE EL CAÑO. (THE PRE-COLUMBIAN SCULPTURE OF THE INTERM... 2805 - RESULTADOS DE LOS ANÁLISIS PALINOLÓGICOS DE LOS YACIMIENTOS LP-134, NA-20 Y PN-106, GRAN COCLÉ, PANAMÁ.

Autores: Enrique MORENO, Smithsonian Tropical Research Institute. Kat... 2806 - CERAMIC COMPONENT OF TRENCHES 4 AND 5 IN THE AREA OF THE COLUMNS OF THE CEREMONIAL COMPLEX OF THE ARCHAEOLOGICAL PARK EL CAÑO (NA-20), 2006: REVISION OF TYPOLOGY AND CHRONOLOGICAL INTERPRET...